3. MPLS L3 VPN – OSPF MPs L three VPN support for OSPF. Now in this video I am going to show you if I’m using OSPF as a PTC routing protocol, how exactly we configure and what are the things we need to keep in mind when we are supporting a customer which is […]

1. MPLS L3 VPN – RIPv2 In this section we’ll see how to configure MPLS L three, VPN for Rip version two. So let’s take an example. If you remember in our previous scenarios we have used static routing which is acting as a P to C routing protocol. Now in this scenario we are […]

3. OVerlapping VPN – Advance Now in this section we’ll continue with our overlap VPN concept. Like if you remember in our previous sections we have seen some basic simple VPNs and using that basic simple VPN, we can make sure that the customer site A one can communicate with the customer side A two […]

5. IPv6 Support for MPLS IPV Six over MPLS. Now what if you have a customer who wants to run IPV Six on the customer side and how we exactly provide the IPV Six over MPLS? How exactly it’s going to work? Now the entire concept of IPV Six over MPLS is going to be […]

1. OVerlapping VPN Overlapping VPN. Now, in this section I’m going to explain you how the overlapping VPNs are going to work. Let me just give you a basic idea what exactly overlapping VPN. So if you just get back to the previous videos, what we have learned, we have seen some of the basic […]

1. Multicasting – Introduction In this video we will try to understand what is multicasting and what are the benefits we get with a multicast instead of using a broadcast or unicast. Now, multicasting is a method of sending one single stream to multiple destinations. Like if you take an example, there is some a […]

4. Dense Mode Configuration Now in this video we’ll see the configuration of IP pin dense mode. Now, before we go ahead, let’s try to quickly revise some of the dense mode concepts. Now, dense mode uses something called flood and prune behavior where all the routers initially flood out the multicast traffic or the […]

1. IGMP Protocol and Versions Now, in this video, our main focus will be on IGMP protocol. But before we go ahead with IGMP, let’s quickly summarize what we discussed in the previous sections. Let’s say there is a multicast server sending a multicast traffic to some of the receivers on the remote network. Now, […]

4. Class Based Weighted Fair Queing Now, in this video we’ll discuss about class based weighted failure queen. Now, class base weighted fail queen is an extension to the default quing mechanism which we used in our previous sections, weighted fail queen. And here in case of class base, we are going to define our […]

1. Queuing Basics Now, this is the first introduction video on the condition management. Now in this video we’ll see some of the basic reasons for congestion, when and which scenarios the condition will occur and what are the different king mechanisms we can use to overcome this condition process. Now, we have different mechanisms, […]