Endpoint Administrator MD-102 Practice Test 86
Question 850
A city-government IT office is implementing an endpoint standard; the approved change must be limited to its target group. The requirement is that the device management service reports an outage that may explain enrollment failures across multiple regions. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Review Intune service health and Microsoft 365 message center before changing device policies
- Reset every affected endpoint without checking service advisories
- Revoke device compliance access for the whole tenant as a workaround
- Change user license assignments randomly to test for recovery
Explanation
Correct Answer
A:Review Intune service health and Microsoft 365 message center before changing device policies. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in the device management service reports an outage that may explain enrollment failures across multiple regions. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
B:Reset every affected endpoint without checking service advisories. Mass resets do not resolve an external service outage.
C:Revoke device compliance access for the whole tenant as a workaround. Broad policy denial compounds an enrollment service problem.
D:Change user license assignments randomly to test for recovery. Uncontrolled license changes obscure service-side incident analysis.
Question 851
A city-government IT office is implementing an endpoint standard; the approved change must be limited to its target group. During a pilot, the team finds that the device management service reports an outage that may explain enrollment failures across multiple regions, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Reset every affected endpoint without checking service advisories
- Inspect the effective assignment and applicable runtime state, then review Intune service health and Microsoft 365 message center before changing device policies
- Revoke device compliance access for the whole tenant as a workaround
- Change user license assignments randomly to test for recovery
Explanation
Correct Answer
B:Inspect the effective assignment and applicable runtime state, then review Intune service health and Microsoft 365 message center before changing device policies. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Review Intune service health and Microsoft 365 message center before changing device policies. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
A:Reset every affected endpoint without checking service advisories. Mass resets do not resolve an external service outage.
C:Revoke device compliance access for the whole tenant as a workaround. Broad policy denial compounds an enrollment service problem.
D:Change user license assignments randomly to test for recovery. Uncontrolled license changes obscure service-side incident analysis.
Question 852
A city-government IT office is implementing an endpoint standard; the approved change must be limited to its target group. For the scenario in which the device management service reports an outage that may explain enrollment failures across multiple regions, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- Correlate advisory timestamps with enrollment error rates and recovery
- On a pilot device, verify that this configuration is deployed and record its runtime result: reset every affected endpoint without checking service advisories
- On a pilot device, verify that this configuration is deployed and record its runtime result: revoke device compliance access for the whole tenant as a workaround
- On a pilot device, verify that this configuration is deployed and record its runtime result: change user license assignments randomly to test for recovery
Explanation
Correct Answer
A:Correlate advisory timestamps with enrollment error rates and recovery. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Review Intune service health and Microsoft 365 message center before changing device policies. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
B:On a pilot device, verify that this configuration is deployed and record its runtime result: reset every affected endpoint without checking service advisories. Mass resets do not resolve an external service outage.
C:On a pilot device, verify that this configuration is deployed and record its runtime result: revoke device compliance access for the whole tenant as a workaround. Broad policy denial compounds an enrollment service problem.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: change user license assignments randomly to test for recovery. Uncontrolled license changes obscure service-side incident analysis.
Question 853
A healthcare organization is implementing an endpoint standard; least-privilege administration and traceability are mandatory. The requirement is that an environment needs a KPI baseline for operational recommendations rather than accepting every automated insight. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Apply every AI-generated remediation across all devices immediately
- Establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort
- Use only the count of enrolled devices as a measure of endpoint health
- Archive all historical metrics before comparing proposed changes
Explanation
Correct Answer
B:Establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in an environment needs a KPI baseline for operational recommendations rather than accepting every automated insight. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Apply every AI-generated remediation across all devices immediately. Recommendations require suitability checks and change control.
C:Use only the count of enrolled devices as a measure of endpoint health. Inventory volume does not describe performance, reliability or user experience.
D:Archive all historical metrics before comparing proposed changes. Removing the baseline prevents evidence-based impact evaluation.
Question 854
A healthcare organization is implementing an endpoint standard; least-privilege administration and traceability are mandatory. During a pilot, the team finds that an environment needs a KPI baseline for operational recommendations rather than accepting every automated insight, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Apply every AI-generated remediation across all devices immediately
- Inspect the effective assignment and applicable runtime state, then establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort
- Use only the count of enrolled devices as a measure of endpoint health
- Archive all historical metrics before comparing proposed changes
Explanation
Correct Answer
B:Inspect the effective assignment and applicable runtime state, then establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
A:Apply every AI-generated remediation across all devices immediately. Recommendations require suitability checks and change control.
C:Use only the count of enrolled devices as a measure of endpoint health. Inventory volume does not describe performance, reliability or user experience.
D:Archive all historical metrics before comparing proposed changes. Removing the baseline prevents evidence-based impact evaluation.
Question 855
A healthcare organization is implementing an endpoint standard; least-privilege administration and traceability are mandatory. For the scenario in which an environment needs a KPI baseline for operational recommendations rather than accepting every automated insight, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- On a pilot device, verify that this configuration is deployed and record its runtime result: apply every AI-generated remediation across all devices immediately
- Compare pilot health scores and incident outcomes against the original baseline
- On a pilot device, verify that this configuration is deployed and record its runtime result: use only the count of enrolled devices as a measure of endpoint health
- On a pilot device, verify that this configuration is deployed and record its runtime result: archive all historical metrics before comparing proposed changes
Explanation
Correct Answer
B:Compare pilot health scores and incident outcomes against the original baseline. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Establish Endpoint Analytics baselines and validate proposed recommendations on a pilot cohort. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
A:On a pilot device, verify that this configuration is deployed and record its runtime result: apply every AI-generated remediation across all devices immediately. Recommendations require suitability checks and change control.
C:On a pilot device, verify that this configuration is deployed and record its runtime result: use only the count of enrolled devices as a measure of endpoint health. Inventory volume does not describe performance, reliability or user experience.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: archive all historical metrics before comparing proposed changes. Removing the baseline prevents evidence-based impact evaluation.
Question 856
A weekly audit exports Intune settings-compliance results for Windows laptops. The report was generated three days earlier and an administrator changes the compliance policy afterward. What must occur before the export represents current evaluation?
- Rename the old CSV file with today’s date without generating a report.
- Count the number of Intune policies rather than checking compliance settings.
- Generate the report again for the relevant platform, then review per-setting/device results and export the updated dataset.
- Use a Microsoft Store app installation report as the device compliance source.
Explanation
Correct Answer
C:Intune organizational reports can require explicit regeneration; an old export is not automatically a new policy evaluation.
Incorrect Answers
A:A renamed file retains old evaluation data.
B:Policy count does not show which devices comply with the revised requirement.
D:App installation status is not the required compliance setting audit.
Question 857
The compliance report shows a newly introduced failing rule as absent, but its generation timestamp predates the policy change. What should be checked first?
- Whether the report needs regeneration after the policy update rather than relying on stale cached results.
- Whether Windows installed an unrelated desktop wallpaper.
- Whether the CSV filename is alphabetized.
- Whether the employee has an Apple managed account.
Explanation
Correct Answer
A:The reporting time boundary explains missing recently changed settings.
Incorrect Answers
B:Wallpaper is not a reporting-generation clock or compliance setting source.
C:File naming does not refresh evaluation data.
D:The reported cohort is Windows and the stale report is a timestamp issue.
Question 858
Which evidence establishes that the audit export represents the currently evaluated failed rule?
- Keep the older export and add a manual “fresh” label.
- Save the new report-generation timestamp, platform filter and exported per-setting device statuses for the target policy.
- Use only an aggregated device count with no timestamp or setting.
- Export the Company Portal app catalog.
Explanation
Correct Answer
B:Time and scoped setting-level results make the exported audit traceable.
Incorrect Answers
A:A label cannot change the report generation and evaluated data.
C:An aggregate count does not prove which current rule was evaluated.
D:The catalog does not contain current compliance-setting results.
Question 859
An endpoint team enabled Endpoint Analytics on a newly enrolled Windows pilot yesterday. The startup performance report remains empty, and none of the devices has restarted. What prerequisite should be met before treating the empty score as an incident?
- Reinstall every device with a new custom Windows image
- Ensure eligible devices have restarted at least once and allow up to a day for startup telemetry processing
- Delete user profile data from each machine
- Disable all Endpoint Analytics policies to force a report
Explanation
Correct Answer
B:Microsoft documents a restart requirement for startup metrics and reporting latency before initial score data appears.
Incorrect Answers
A:An empty first-day telemetry report does not prove the Windows installation is corrupted.
C:User data deletion does not satisfy the telemetry restart or ingestion prerequisites.
D:Removing data-collection configuration cannot cause missing metrics to arrive.
Question 860
Five Endpoint Analytics pilot devices were enrolled but only two restarted. The dashboard says insufficient data. The administrator interprets the absent score as a zero productivity score. What is the more likely explanation?
- A missing score necessarily means every app crashed during startup
- The first two reporting devices produced a high startup score and therefore all other devices should be counted as zero
- There is insufficient eligible startup telemetry; the scoring prerequisite is not met just because devices are enrolled
- Windows Update feature versions automatically determine the organization’s analytics score
Explanation
Correct Answer
C:Endpoint Analytics distinguishes missing data from poor performance and needs enough reporting devices and startup events.
Incorrect Answers
A:Application crashes are a different signal and absent telemetry is not a numeric zero score.
B:An insufficient-data cohort cannot be filled by inventing values for endpoints without startup telemetry.
D:Installed OS version alone does not create a startup score without device performance data.