Endpoint Administrator MD-102 Practice Test 84
Question 830
A manufacturer uses endpoint insights to recommend a mass restart following a crash spike; however the spike is limited to one driver-and-OS cohort and one safety-critical production shift. Following a recommended restart, devices still crash and only the affected driver version reproduces the failure. What was the original inference error?
- The reliability service requires a desktop wallpaper refresh before evaluating crashes
- An operational symptom was mistaken for a root cause; restart recommendations did not address a driver-specific crash condition
- A restarted test device is briefly healthy, so presume the same reboot fixes the underlying driver defect for all clients
- A new Entra dynamic user group will eliminate the driver fault by itself
Explanation
Correct Answer
B:Rebooting a device is not equivalent to correcting the causative driver
Incorrect Answers
A:Wallpaper is not the failure mechanism
C:A temporary symptom improvement does not establish resolution of a driver-specific crash; inspect the driver event/version evidence and recurrence.
D:Group membership cannot fix a faulty installed driver
Question 831
A manufacturer uses endpoint insights to recommend a mass restart following a crash spike; however the spike is limited to one driver-and-OS cohort and one safety-critical production shift. What evidence supports a safe rollout of a targeted driver remediation instead?
- The insight ranking for restart drops on a dashboard without endpoint data
- A mass restart command is accepted by the server but endpoint status is unknown
- Only the number of new incidents is counted without usage or affected driver versions
- After a controlled driver repair, compare crash frequency on the affected version cohort with a matched untouched cohort and confirm critical devices were excluded until approval
Explanation
Correct Answer
D:Cohort metrics and exclusion prove measured improvement and operational safety
Incorrect Answers
A:A changed recommendation ranking does not establish successful repair
B:Command acceptance is not observed fault resolution
C:Aggregate counts can hide cohort differences
Question 832
A logistics operator is implementing an endpoint standard; a pilot deployment must precede the wider rollout. The requirement is that an Intune operations team needs reporting by platform and compliance state, not a screenshot of a device list. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Copy a one-time device list into a slide and treat it as a continuously refreshed report
- Use Windows Update ring assignments as a substitute for compliance reporting
- Use Intune reporting with appropriate filters, exports and governed dashboards
- Grant all employees full tenant report export rights
Explanation
Correct Answer
C:Use Intune reporting with appropriate filters, exports and governed dashboards. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in an Intune operations team needs reporting by platform and compliance state, not a screenshot of a device list. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Copy a one-time device list into a slide and treat it as a continuously refreshed report. A static extract cannot supply ongoing status changes.
B:Use Windows Update ring assignments as a substitute for compliance reporting. Deployment settings are not a reporting workspace.
D:Grant all employees full tenant report export rights. Broad export permission exceeds the stated governance boundary.
Question 833
A logistics operator is implementing an endpoint standard; a pilot deployment must precede the wider rollout. During a pilot, the team finds that an Intune operations team needs reporting by platform and compliance state, not a screenshot of a device list, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Inspect the effective assignment and applicable runtime state, then use Intune reporting with appropriate filters, exports and governed dashboards
- Copy a one-time device list into a slide and treat it as a continuously refreshed report
- Use Windows Update ring assignments as a substitute for compliance reporting
- Grant all employees full tenant report export rights
Explanation
Correct Answer
A:Inspect the effective assignment and applicable runtime state, then use Intune reporting with appropriate filters, exports and governed dashboards. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Use Intune reporting with appropriate filters, exports and governed dashboards. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
B:Copy a one-time device list into a slide and treat it as a continuously refreshed report. A static extract cannot supply ongoing status changes.
C:Use Windows Update ring assignments as a substitute for compliance reporting. Deployment settings are not a reporting workspace.
D:Grant all employees full tenant report export rights. Broad export permission exceeds the stated governance boundary.
Question 834
A logistics operator is implementing an endpoint standard; a pilot deployment must precede the wider rollout. For the scenario in which an Intune operations team needs reporting by platform and compliance state, not a screenshot of a device list, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- On a pilot device, verify that this configuration is deployed and record its runtime result: copy a one-time device list into a slide and treat it as a continuously refreshed report
- On a pilot device, verify that this configuration is deployed and record its runtime result: use Windows Update ring assignments as a substitute for compliance reporting
- Compare filtered report counts with underlying enrolled-device inventory
- On a pilot device, verify that this configuration is deployed and record its runtime result: grant all employees full tenant report export rights
Explanation
Correct Answer
C:Compare filtered report counts with underlying enrolled-device inventory. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Use Intune reporting with appropriate filters, exports and governed dashboards. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
A:On a pilot device, verify that this configuration is deployed and record its runtime result: copy a one-time device list into a slide and treat it as a continuously refreshed report. A static extract cannot supply ongoing status changes.
B:On a pilot device, verify that this configuration is deployed and record its runtime result: use Windows Update ring assignments as a substitute for compliance reporting. Deployment settings are not a reporting workspace.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: grant all employees full tenant report export rights. Broad export permission exceeds the stated governance boundary.
Question 835
A distributed nonprofit is implementing an endpoint standard; limited support staff need a repeatable rollout. The requirement is that devices with long boot times need reproducible performance evidence before remediation. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Use Windows Autopilot enrollment status as the main performance time-series
- Rotate BitLocker recovery keys to address slow startup before measuring cause
- Count users in a device group as the performance metric
- Review Endpoint Analytics startup performance and device health cohorts
Explanation
Correct Answer
D:Review Endpoint Analytics startup performance and device health cohorts. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in devices with long boot times need reproducible performance evidence before remediation. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Use Windows Autopilot enrollment status as the main performance time-series. Autopilot readiness is not day-to-day endpoint startup performance.
B:Rotate BitLocker recovery keys to address slow startup before measuring cause. Disk recovery key rotation does not establish the startup bottleneck.
C:Count users in a device group as the performance metric. Group size does not quantify device startup time.
Question 836
A distributed nonprofit is implementing an endpoint standard; limited support staff need a repeatable rollout. During a pilot, the team finds that devices with long boot times need reproducible performance evidence before remediation, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Use Windows Autopilot enrollment status as the main performance time-series
- Rotate BitLocker recovery keys to address slow startup before measuring cause
- Inspect the effective assignment and applicable runtime state, then review Endpoint Analytics startup performance and device health cohorts
- Count users in a device group as the performance metric
Explanation
Correct Answer
C:Inspect the effective assignment and applicable runtime state, then review Endpoint Analytics startup performance and device health cohorts. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Review Endpoint Analytics startup performance and device health cohorts. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
A:Use Windows Autopilot enrollment status as the main performance time-series. Autopilot readiness is not day-to-day endpoint startup performance.
B:Rotate BitLocker recovery keys to address slow startup before measuring cause. Disk recovery key rotation does not establish the startup bottleneck.
D:Count users in a device group as the performance metric. Group size does not quantify device startup time.
Question 837
A distributed nonprofit is implementing an endpoint standard; limited support staff need a repeatable rollout. For the scenario in which devices with long boot times need reproducible performance evidence before remediation, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- Compare baseline startup score and affected device metrics
- On a pilot device, verify that this configuration is deployed and record its runtime result: use Windows Autopilot enrollment status as the main performance time-series
- On a pilot device, verify that this configuration is deployed and record its runtime result: rotate BitLocker recovery keys to address slow startup before measuring cause
- On a pilot device, verify that this configuration is deployed and record its runtime result: count users in a device group as the performance metric
Explanation
Correct Answer
A:Compare baseline startup score and affected device metrics. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Review Endpoint Analytics startup performance and device health cohorts. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
B:On a pilot device, verify that this configuration is deployed and record its runtime result: use Windows Autopilot enrollment status as the main performance time-series. Autopilot readiness is not day-to-day endpoint startup performance.
C:On a pilot device, verify that this configuration is deployed and record its runtime result: rotate BitLocker recovery keys to address slow startup before measuring cause. Disk recovery key rotation does not establish the startup bottleneck.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: count users in a device group as the performance metric. Group size does not quantify device startup time.
Question 838
A manufacturing group is implementing an endpoint standard; an operations pilot must preserve existing user data. The requirement is that a repetitive Windows service failure should be detected and corrected without help desk visits. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Execute a one-time script manually and claim continuous detection
- Change user sign-in frequency to fix a failed Windows service
- Configure a compliance rule only but provide no corrective action
- Deploy Intune Remediations detection and remediation scripts with supported schedule and authorization
Explanation
Correct Answer
D:Deploy Intune Remediations detection and remediation scripts with supported schedule and authorization. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in a repetitive Windows service failure should be detected and corrected without help desk visits. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Execute a one-time script manually and claim continuous detection. A manual run does not establish scheduled recurring remediation.
B:Change user sign-in frequency to fix a failed Windows service. Identity policy does not repair the stopped service.
C:Configure a compliance rule only but provide no corrective action. Compliance can report a failure without remediating the underlying condition.
Question 839
A manufacturing group is implementing an endpoint standard; an operations pilot must preserve existing user data. During a pilot, the team finds that a repetitive Windows service failure should be detected and corrected without help desk visits, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Execute a one-time script manually and claim continuous detection
- Change user sign-in frequency to fix a failed Windows service
- Configure a compliance rule only but provide no corrective action
- Inspect the effective assignment and applicable runtime state, then deploy Intune Remediations detection and remediation scripts with supported schedule and authorization
Explanation
Correct Answer
D:Inspect the effective assignment and applicable runtime state, then deploy Intune Remediations detection and remediation scripts with supported schedule and authorization. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Deploy Intune Remediations detection and remediation scripts with supported schedule and authorization. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
A:Execute a one-time script manually and claim continuous detection. A manual run does not establish scheduled recurring remediation.
B:Change user sign-in frequency to fix a failed Windows service. Identity policy does not repair the stopped service.
C:Configure a compliance rule only but provide no corrective action. Compliance can report a failure without remediating the underlying condition.
Question 840
A manufacturing group is implementing an endpoint standard; an operations pilot must preserve existing user data. For the scenario in which a repetitive Windows service failure should be detected and corrected without help desk visits, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- On a pilot device, verify that this configuration is deployed and record its runtime result: execute a one-time script manually and claim continuous detection
- On a pilot device, verify that this configuration is deployed and record its runtime result: change user sign-in frequency to fix a failed Windows service
- Simulate service failure and observe detection exit code, remediation and rerun
- On a pilot device, verify that this configuration is deployed and record its runtime result: configure a compliance rule only but provide no corrective action
Explanation
Correct Answer
C:Simulate service failure and observe detection exit code, remediation and rerun. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Deploy Intune Remediations detection and remediation scripts with supported schedule and authorization. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
A:On a pilot device, verify that this configuration is deployed and record its runtime result: execute a one-time script manually and claim continuous detection. A manual run does not establish scheduled recurring remediation.
B:On a pilot device, verify that this configuration is deployed and record its runtime result: change user sign-in frequency to fix a failed Windows service. Identity policy does not repair the stopped service.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: configure a compliance rule only but provide no corrective action. Compliance can report a failure without remediating the underlying condition.