What evidence best verifies that the targeted domain policy change fixed the startup regression?
Observe a lower number of monthly remote restarts without timing measurements.
Compare before-and-after Group Policy logon and desktop-ready times for the same restarted pilot devices, with a similar unaffected cohort as control.
Verify only that the updated policy is listed as assigned in Intune.
Read a single tenant-wide startup score after excluding all slow devices.
Explanation
Correct Answer
B:
The matched measurements directly test the slow component and guard against population changes.
Incorrect Answers
A:
Restart counts cannot verify that measured sign-in latency improved.
C:
Assignment is configuration intent, not evidence of shorter logon processing.
D:
Changing the population can improve an aggregate score without fixing the affected endpoints.
Question 871
A security report flags one setting as conflicting on ten Windows devices; the same configuration profile shows success on ninety others. What should the operator inspect first to scope the actual drift?
Change the setting across all one hundred devices based on the overall profile status.
Open device- and setting-level configuration status for the affected devices and identify the competing profiles and last check-in.
Interpret the profile assignment count as proof that each setting applied.
Disable the configuration reporting export to clear the conflict state.
Explanation
Correct Answer
B:
A per-setting conflict and its evaluated device context identify which configured values compete and whether reporting is fresh.
Incorrect Answers
A:
A broad change ignores the per-device discrepancy and may disturb working endpoints.
C:
Assignment count is not the result of each underlying setting evaluation.
D:
Removing a report cannot resolve conflicting effective settings on devices.
Question 872
The portal reports Pending for a configuration on a pilot laptop that has not checked in since its policy was assigned. What is the most defensible first diagnosis?
Pending proves two policies are writing contradictory values to the same setting.
Pending proves the administrator lacks permission to create a compliance policy.
Policy evaluation has not been observed on the device; confirm connectivity and trigger or wait for a supported sync before diagnosing an actual settings conflict.
Pending proves the target device is out of support for the requested CSP.
Explanation
Correct Answer
C:
Without a post-assignment device check-in, Pending is insufficient evidence that the device rejected the setting.
Incorrect Answers
A:
A true settings conflict requires evidence of competing evaluation, not merely absence of a result.
B:
Role permissions are not inferred from a device that has not checked in.
D:
Platform support requires the device version and setting applicability details.
Question 873
What acceptance test establishes the configuration conflict was repaired without hiding the defect?
After device check-in, inspect the same affected setting on the same device IDs, confirming the intended value and no remaining conflict state.
Check only that the profile still exists and shows one hundred assignments.
Delete the original conflict-report rows from the saved CSV.
Verify that the Device configuration page loads successfully for an admin.
Explanation
Correct Answer
A:
The test observes both target outcome and authoritative device-level reporting after applying the correction.
Incorrect Answers
B:
Existence and targeting are not proof that the conflicting setting is resolved.
C:
Editing historic report output cannot alter policy evaluation on endpoints.
D:
Portal availability is unrelated to whether the corrected setting took effect.
Question 874
Dozens of unrelated devices across platforms suddenly fail policy check-ins. Before reversing recently approved endpoint configurations, the Intune operations lead needs to identify potential service disruptions. Which Microsoft 365/Intune source should be checked?
Review the Intune tenant Service health and message center for active tenant-affecting incidents/advisories and recent planned changes.
Delete all device policies to see whether the issue disappears.
Use only a single Windows driver version as the universal explanation.
Check only the number of app protection policies in a private spreadsheet.
Explanation
Correct Answer
A:
The tenant page surfaces service incidents and messages relevant to that tenant, separating cloud-service problems from local policy changes.
Incorrect Answers
B:
Broad destructive change is inappropriate before checking a possible service-wide incident.
C:
Simultaneous cross-platform check-in failures warrant a service/tenant-level check first.
D:
App policy counts do not report Intune service health.
Question 875
Enrollment, reporting and policy delivery fail simultaneously across multiple device platforms, and Intune service health shows an active tenant incident. What is the best initial interpretation?
All platform-specific configuration profiles must have become invalid at the same instant.
A local Windows feature-update safeguard hold necessarily blocks all Android devices.
Service health notices can never apply to the current tenant.
A documented tenant-affecting service incident may explain the broad symptoms; correlate timing and avoid attributing every failure to one local profile.
Explanation
Correct Answer
D:
The service-health notice gives external context; it should be combined with observed client evidence rather than assumed as a sole cause.
Incorrect Answers
A:
A synchronized multi-platform symptom is not proof every unrelated profile failed.
B:
Windows update targeting cannot plausibly explain Android enrollment and tenant reporting failures.
C:
The Intune tenant health page specifically surfaces tenant-affecting incidents.
Question 876
Which operational record supports a defensible incident disposition after Microsoft reports restoration?
Preserve the service incident ID/timeline and show Intune check-in and policy-reporting recovery across representative device platforms.
Record only that the portal no longer shows a red incident banner.
Recreate every endpoint policy without documenting the incident.
Test only that one Windows desktop can connect to a public website.
Explanation
Correct Answer
A:
Provider status and observed tenant recovery together distinguish service restoration from a coincidental local change.
Incorrect Answers
B:
Banner removal without checking tenant functionality is incomplete recovery evidence.
C:
Unnecessary changes obscure the cause and may introduce new faults.
D:
General Internet access is not evidence that Intune enrollment and reporting recovered.
Question 877
A new Endpoint analytics pilot reports Insufficient data for a score from four actively reporting Windows devices. Management requests a meaningful comparison with its pre-rollout baseline. What should the engineer do first?
Manually replace Insufficient data with a score of 100 in the exported workbook.
Raise the regression alert threshold to 100 before collecting more data.
Copy the unrelated production tenant score as the pilot baseline.
Ensure at least five eligible devices report, establish a comparable baseline and evaluate the score only after the necessary collection and restart window.
Explanation
Correct Answer
D:
Endpoint analytics needs sufficient participating devices; a comparison cannot be trusted from an insufficient-data state.
Incorrect Answers
A:
A fabricated score conceals a missing sample; it is not observed device performance.
B:
Changing the threshold does not solve the sample-size prerequisite.
C:
Different cohorts and instrumentation cannot establish the pilot pre-change performance.
Question 878
An endpoint score appears to improve after the team excluded half the slow laptops from data collection. Why is the result not proof of remediation?
Interpret the new higher aggregate score as proof the removed slow laptops now start faster, despite their lack of post-change telemetry.
The sampled population changed; the score might reflect exclusion of slow devices rather than improvements to those devices.
Compare the post-exclusion tenant-wide average with the old average without reconstructing the same device cohort or checking startup measurements.
Confirm the excluded laptops are now Not applicable in endpoint analytics and use that inventory status as evidence the startup delays were remediated.
Explanation
Correct Answer
B:
A baseline comparison requires a stable, representative cohort or an explicit adjustment for the population difference.
Incorrect Answers
A:
Devices excluded from the dataset have no measured improvement; aggregate scores from a changed cohort cannot establish a per-device gain.
C:
A comparison with a changed denominator can raise the average without any improvement to previously slow laptops.
D:
Not applicable or excluded inventory status means data is absent from the score, not that slow startup components were fixed.
Question 879
Which evidence makes a before-and-after Endpoint analytics baseline comparison credible?
Compare a predeployment manufacturing cohort to a postdeployment finance cohort without normalization.
Keep the eligible device cohort stable, verify enough devices and recent telemetry, then compare scores and relevant startup/reliability subscores over aligned periods.
Confirm only that a custom baseline object exists in the portal.
Compare only the minimum and maximum score possible in the user interface.
Explanation
Correct Answer
B:
Consistent measurement coverage, sample adequacy, and aligned times limit false gains from missing devices.
Incorrect Answers
A:
Different device populations introduce confounding performance differences.
C:
A baseline record does not prove reporting coverage or measurable improvement.
D:
Scale boundaries provide no before-and-after observations.
Question 880
A reporting pipeline imports Endpoint analytics CSV and labels every negative score as a service failure. The file contains EndpointAnalyticsScore values -1 and -2. What transformation should the pipeline use?
Convert -1 and -2 to scores of 0, then flag all those devices as the worst performers.
Take absolute values so both become valid scores of 1 and 2.
Map -1 and -2 to unavailable scores rather than numeric performance, and preserve source device cohort and collection period.
Discard all other nonnegative values in order to avoid bad input.
Explanation
Correct Answer
C:
Microsoft documents negative sentinel values for unavailable scores; arithmetic treatment would distort the reporting data.
Incorrect Answers
A:
Unavailable telemetry is not a measured score of zero.
B:
The sign of the documented sentinel values carries a distinct nonnumeric meaning.
D:
Valid scores should be preserved, not lost because a subset uses sentinel codes.
Our team works hard to provide students with high exam practice test questions and compelling learning experiences. We're confident of the quality level of the products we offer and provide no hassle satisfaction guarantee.
Why choose Exam-Labs?613,693+Satisfied Customers since 2015
100% Latest Exam Questions
Accurate & Updated Answers
Regular Free Updates
24/7 Customer Support
Instant Download
Exam Info
Microsoft MD-102 Practice Test Questions, Microsoft MD-102 Exam Practice Test Questions
Looking to pass your tests the first time. You can study with Microsoft MD-102 certification practice test questions and answers, study guide, training courses. With Exam-Labs VCE files you can prepare with Microsoft MD-102 Endpoint Administrator exam practice test questions and answers. The most complete solution for passing with Microsoft certification MD-102 exam practice test questions and answers, study guide, training course.
Microsoft MD-102: Managing and Securing Microsoft 365 Endpoints
Microsoft exam MD-102, Managing and Securing Microsoft 365 Endpoints by using Intune, is active as of October 1, 2026. Microsoft’s current skills outline, effective July 24, 2026, covers preparing infrastructure for devices, enrolling endpoints into Microsoft Entra ID and Microsoft Intune, implementing identity and compliance, managing and maintaining devices, managing and securing applications, protecting endpoints, and optimizing operations through automation, monitoring, and reporting.
Microsoft has also published a further English-language blueprint update for October 27, 2026. Because that date is still in the future, candidates taking the exam on October 1 should study the July 24 objectives and review the upcoming change log only if their scheduled exam will occur after the update. The Endpoint Administrator transition provides useful role context, but Microsoft’s live study guide remains the blueprint authority.
Endpoint administration begins with identity and enrollment architecture
Devices need an identity relationship with the organization before policies, applications, and access controls can be applied reliably. MD-102 candidates should understand Microsoft Entra join and registration concepts, enrollment methods, automatic enrollment, device platforms, ownership, and the prerequisites that make large-scale onboarding predictable. A manual process that works for ten devices may fail operationally when thousands of endpoints must be provisioned.
Practice should compare different onboarding scenarios: corporate Windows devices, personally owned mobile devices, shared or frontline devices, and replacement hardware. Ask what identity state is required, how the device reaches Intune, which user or group receives policy, and how the organization proves enrollment completed successfully.
Enrollment design also has licensing and platform-support implications. Some capabilities depend on Intune licensing, Microsoft Entra features, platform version, ownership type, or enrollment method. A candidate should learn to read a scenario for those prerequisites before choosing a configuration. Troubleshooting is faster when the administrator first verifies that the chosen management method is supported for the device and user population.
Windows Autopilot turns deployment into an identity-driven provisioning process
Modern Windows deployment increasingly separates device provisioning from traditional image-heavy workflows. Windows Autopilot can use hardware identity, deployment profiles, enrollment status controls, and cloud-delivered configuration so a device moves from factory state toward organizational readiness with less local intervention. Candidates need to understand where Autopilot fits and what infrastructure it still depends on.
A good lab resets a device or virtual machine and traces the complete provisioning experience. Observe when the user authenticates, when Entra identity is established, when Intune enrollment occurs, which profiles and apps arrive, and what can block the process. Troubleshooting Autopilot becomes much easier when candidates know the sequence rather than memorizing isolated settings.
Autopilot preparation should include hardware replacement and reset scenarios, not only first deployment. Organizations may reuse devices for different users, redeploy them after repair, or convert existing hardware into cloud-managed workflows. Understanding reset options, enrollment records, and device identity helps administrators avoid duplicate objects and ensures the correct profile is applied when a device changes hands.
Configuration profiles translate policy into repeatable endpoint state
Intune supports settings catalogs, templates, device restrictions, security baselines, certificates, Wi-Fi, VPN, and many other configuration mechanisms. MD-102 questions often test the ability to choose the correct policy type and scope. Overlapping profiles can create conflict, while weak targeting can leave devices unmanaged or apply controls to the wrong population.
Study by building a small policy hierarchy and documenting intent. Create baseline settings, add role-specific requirements, and then introduce a conflicting setting deliberately. Review reporting and determine which policy wins or where remediation is needed. This turns policy precedence from an abstract rule into observable endpoint behavior.
Configuration profiles also need assignment strategy. Dynamic groups, filters, platform targeting, exclusions, and phased rollout can reduce the risk of applying a disruptive setting to every device at once. Candidates should practice releasing a policy to a pilot group, checking reporting, and expanding deployment only after the result is understood. This is both a technical and an operational control.
Compliance and Conditional Access connect device health to resource access
A compliant-device signal is valuable because it can participate in access decisions, but compliance policy and Conditional Access are different layers. Intune evaluates whether a device meets defined requirements, while Entra Conditional Access can use that state with identity, application, location, risk, and other conditions to decide whether access should be granted.
Hands-on scenarios should test both layers. Mark a device noncompliant by violating a requirement, observe the reporting delay or remediation path, and then see how a Conditional Access policy changes the user experience. This clarifies why a compliance rule does not automatically block a resource unless access policy is configured to use it.
Compliance design should distinguish remediation grace periods from immediate enforcement. Some organizations allow users time to correct encryption, password, or threat conditions before access is restricted; others require immediate action for high-risk states. The exam can present the same technical control in different business contexts, so candidates should reason from the required risk posture rather than assume one universal setting.
Application management spans deployment, protection, configuration, and updates
MD-102 includes deploying and updating applications, configuring app protection and app configuration policies, and securing organizational data across managed and unmanaged devices. Candidates should understand app types, assignments, detection logic, dependencies, supersedence, mobile application management, and the distinction between managing the whole device and protecting data inside supported applications.
A useful lab deploys one Win32 app and one mobile application, then adds an app protection policy to a personally owned device scenario. Test what happens when data is copied to an unmanaged app or when an installation detection rule is wrong. These exercises reveal how application management depends on both packaging and policy design.
Application deployment at scale also depends on accurate detection and requirement logic. If Intune cannot reliably determine whether an app is already installed, devices may reinstall it repeatedly or report false failures. Practice should include testing install and uninstall commands, exit codes, dependencies, and detection rules outside the portal before assigning a package to production groups.
Endpoint security requires coordinated controls rather than one security switch
Security settings can span antivirus, firewall, disk encryption, attack surface reduction, account protection, security baselines, Defender for Endpoint integration, local privileges, and other controls. Candidates need to understand which service owns a setting and how the controls work together. Duplicating the same configuration through multiple mechanisms can make troubleshooting difficult.
The Microsoft Intune security discussion is most useful when paired with a lab that traces a security requirement from policy assignment to device state and reporting. The goal is not to enable every control, but to implement a deliberate security posture.
Endpoint security reporting should be treated as an operational feedback loop. A policy is not complete when it is assigned; administrators need to know which devices succeeded, which are pending, which conflict with another setting, and which users require remediation. This habit connects configuration, monitoring, and support and matches the increasingly operational emphasis of the current MD-102 blueprint.
Remote actions and lifecycle operations keep managed devices supportable
Endpoint administrators perform wipe, retire, sync, restart, remote lock, passcode reset, device cleanup, and other lifecycle operations. The correct action depends on ownership and business context. Retiring a personally owned device should protect organizational data without unnecessarily destroying personal content, while a lost corporate device may require a stronger response.
Scenario practice should include joiners, movers, leavers, lost devices, stale records, and ownership changes. For each scenario, identify what happens in Intune, Entra ID, application access, and corporate data. This helps candidates reason about the endpoint lifecycle instead of treating remote actions as interchangeable buttons.
Windows 365 and cloud PC scenarios add another endpoint type to the administrator’s mental model. The device experience may be virtual, but identity, access, policy, application delivery, and security still need coordinated management. Candidates should avoid assuming that virtual endpoints eliminate endpoint administration; they change provisioning and infrastructure boundaries while preserving many policy responsibilities.
Automation, monitoring, and reporting are now explicit endpoint-admin skills
The July 2026 blueprint added a distinct emphasis on automating management tasks and monitoring endpoint health. Modern administrators use PowerShell, Microsoft Graph, Intune reporting, analytics, remediation capabilities, and health information to manage fleets at scale. The exam increasingly reflects the reality that manual portal work does not scale to large environments.
Candidates should be able to identify what should be automated, how to scope an action safely, and which telemetry proves that the change worked. A script that changes thousands of devices needs safeguards, logging, and rollback thinking. The MD-102 endpoint administration material can provide structure, but automation practice should use realistic operational tasks.
Intune Suite add-on capabilities also require candidates to distinguish core management from optional advanced features. A scenario may mention remote assistance, privilege management, analytics, or specialized security capabilities that depend on additional licensing. Before selecting a feature, verify whether the organization actually has the required service and whether the capability is appropriate for the device population.
MD-102 preparation should use a mixed-device lab and a dated blueprint
A strong capstone environment includes at least a Windows endpoint and a mobile-device scenario, Entra identities and groups, Intune enrollment, configuration profiles, compliance, applications, endpoint security, Conditional Access integration, remote actions, and reporting. Work through the lifecycle from enrollment to retirement and deliberately create failures that require diagnosis.
Candidates should also be date-conscious. The July 24, 2026 skills outline is active on October 1; Microsoft’s October 27 update is upcoming. The MD-102 endpoint-administration role is useful for broad context, while the official study guide determines the objectives that apply on the actual exam date.
The upcoming October 27 blueprint should be reviewed only when it affects the candidate’s scheduled date. Microsoft often publishes future objectives in advance so learners can prepare for a transition. That does not mean the future outline becomes active immediately. Date discipline prevents candidates from studying the wrong weighting or assuming a newly announced feature is already being assessed.
Use Microsoft MD-102 certification exam practice test questions, study guide and training course - the complete package at discounted price. Pass with MD-102 Endpoint Administrator practice test questions and answers, study guide, complete training course especially formatted in VCE files. Latest Microsoft certification MD-102 exam practice test questions and answers will guarantee your success without studying for endless hours.
FAQs
Microsoft MD-102 Exam Practice Test Questions, Microsoft MD-102 Practice Test Questions and Answers
Do you have questions about our MD-102 Endpoint Administrator practice test questions and answers or any of our products? If you are not clear about our Microsoft MD-102 exam practice test questions, you can read the FAQ below.
The MD-102 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.
MD-102 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates MD-102 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.
What is VCE?
VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.
Can I try it for free?
Yes, you can. Look through free VCE files section and download any file you choose absolutely free.
Where do I get VCE Exam Simulator?
VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.
How are Premium VCE files different from Free VCE files?
Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.
Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.
How long will I receive updates for MD-102 Premium VCE File that I purchased?
Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.
How can I get the products after purchase?
All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.
Will I be able to renew my products when they expire?
Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.
Please note that you will not be able to use the product after it has expired if you don't renew it.
How often are the questions updated?
We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.
What is a Study Guide?
Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.
How can I open a Study Guide?
Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.
What is a Training Course?
Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Certification/Exam.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Demo.
How It Works
Step 1. Choose Exam on Exam-Labs
Download IT Exams Questions & Answers
Step 2. Open Exam with Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment