IT has submitted a Retire action on a personal Windows laptop, but the user has been offline since yesterday and managed settings remain. Which operational detail best explains the pending removal?
Retire always performs an immediate local factory reset.
The laptop’s hardware serial number is missing from Autopilot.
The user has configured a Windows quality-update deferral.
The device has not checked in with Intune after the Retire request, so the remote removal has not run yet.
Explanation
Correct Answer
D:
Retire typically executes on the next Intune device check-in rather than at the moment the admin clicks it.
Incorrect Answers
A:
That describes the wrong action type and does not explain pending managed-profile removal.
B:
Autopilot registration does not directly determine next-check-in delivery of an existing Retire request.
C:
An update deferral is unrelated to checking in for a Retire action.
Question 441
How should support verify the BYOD retirement respected both requirements?
Confirm the device was factory reset and no personal files remain.
Record only that the admin clicked Retire.
After the device checks in, confirm the management profile and managed company settings are removed while a personal test file remains present.
Check that the device can still access company VPN resources.
Explanation
Correct Answer
C:
This confirms organizational removal without destruction of personal data.
Incorrect Answers
A:
That would contradict the preservation requirement.
B:
Submitting a pending action is not evidence it applied on the offline client.
D:
Continued access is not proof of removal of organizational management and may indicate an unresolved risk.
Question 442
A hospital loses a supervised corporate iPad and needs to show a return contact number while protecting access without wiping clinical audit data immediately. Which available remote device action fits this recovery objective?
Use a full Wipe before attempting Lost Mode while data retention is required
Send a standard remote lock command to the supervised iPad and expect it to show a customized Lost Mode recovery message
Use a routine Sync only and assume the device is locked
Enable Intune Lost Mode on the supervised iPad with an approved recovery message and phone number
Explanation
Correct Answer
D:
Supervised iOS/iPadOS Lost Mode locks access and displays recovery instructions
Incorrect Answers
A:
Wipe is destructive and defeats the recoverable locked-device intent
B:
Remote lock is not supervised Lost Mode and does not satisfy the specific recovery message and phone-number requirement.
C:
Device sync requests policy check-in, not Lost Mode lock
Question 443
A hospital loses a supervised corporate iPad and needs to show a return contact number while protecting access without wiping clinical audit data immediately. The Lost Mode action is unavailable for a personal iPhone that is enrolled without supervision. Which prerequisite explains it?
The iOS/iPadOS device must be supervised for this Lost Mode action
The iPad is managed with user-driven enrollment but has not been placed in the corporate supervised state
The device has an iPadOS MDM profile but was not assigned an app protection policy
A macOS FileVault escrow action must be complete
Explanation
Correct Answer
A:
Enrollment alone without supervision is not enough for iOS Lost Mode
Incorrect Answers
B:
A managed device record alone is not sufficient for Intune Lost Mode; the remote action depends on actual iOS/iPadOS supervision.
C:
App protection assignment is separate from the supervised-device prerequisite for the Lost Mode action.
D:
Mac disk encryption cannot enable iOS Lost Mode
Question 444
A hospital loses a supervised corporate iPad and needs to show a return contact number while protecting access without wiping clinical audit data immediately. Which evidence shows Lost Mode secured the lost supervised iPad?
The target iPad reports Lost Mode active and displays the recovery message while remaining locked, and the device can be located or recovered through authorized actions
The admin clicked Enable and saw a spinner but no device action status
A work app protection policy shows assigned to a user
A different supervised iPad was successfully locked
Explanation
Correct Answer
A:
Confirms actual device lockdown and recoverability
Incorrect Answers
B:
Initiation does not establish execution
C:
App policy assignment does not lock the whole lost device
D:
Another device cannot validate the target device action
Question 445
A remote help desk needs to rotate a macOS device personal FileVault recovery key after an approved sensitive-key disclosure, with minimum user disruption. Which action aligns with the platform credential and least-disruptive intent?
Use the standard Remote lock action and expect it to generate and escrow a new FileVault personal recovery key
Wipe the Mac without checking whether a targeted key rotation suffices
Reapply an unchanged FileVault encryption configuration and infer that the personal recovery key rotates automatically
Use the supported Intune Rotate FileVault recovery key remote action on the managed Mac and confirm escrow after rotation
Explanation
Correct Answer
D:
Mac FileVault key rotation is a platform-specific action distinct from BitLocker or factory wipe
Incorrect Answers
A:
Remote lock does not rotate a FileVault recovery credential; the supported key-rotation action and escrow confirmation are distinct.
B:
A destructive reset is disproportionate to replacing an escrowed recovery key
C:
Reassigning encryption settings does not prove a new personal recovery key was generated and escrowed through the rotation action.
Question 446
A remote help desk needs to rotate a macOS device personal FileVault recovery key after an approved sensitive-key disclosure, with minimum user disruption. An operator tries the Windows BitLocker rotation action on a Mac and sees it is unavailable. What is the platform mismatch?
FileVault, not BitLocker, provides the macOS disk recovery key and has its own supported rotation action
The Mac is missing a Microsoft 365 Apps Windows app deployment channel
A device-category label was not assigned before attempting BitLocker
Apple enrollment profiles use a different color icon
Explanation
Correct Answer
A:
Disk recovery controls differ by OS and key type
Incorrect Answers
B:
Office app channel does not choose disk encryption technology
C:
Category assignment cannot make Windows BitLocker run on macOS
D:
Cosmetic profile metadata does not enable BitLocker
Question 447
A remote help desk needs to rotate a macOS device personal FileVault recovery key after an approved sensitive-key disclosure, with minimum user disruption. How should the team validate FileVault key rotation without exposing the new secret in tickets?
Paste the new recovery key into a public support group chat
See a previous key escrow record with no postrotation timestamp
Confirm that FileVault encryption remains enabled on the Mac but do not check the post-rotation escrow record
Confirm the supported rotation action completed and the new personal recovery key is escrowed for the correct Mac with access restricted to authorized operators
Explanation
Correct Answer
D:
Verifies rotation and protected recovery without distributing the secret
Incorrect Answers
A:
Public disclosure defeats sensitive-key protection
B:
Historical escrow alone does not prove a new key was stored
C:
An encrypted volume can still be protected by its old personal recovery key; verify the supported remote rotation completed and the new escrow state.
Question 448
A support team must collect diagnostics from a failing Intune-managed Windows laptop that frequently disconnects from the network. What action should be attempted before replacing device identity or wiping user files?
Wipe the device immediately and hope its old local logs survive
Retire the device before it has uploaded diagnostics
Export only a user membership list and label it device diagnostics
Submit the supported Collect diagnostics remote action with the right Intune role permissions and allow device connectivity for upload
Explanation
Correct Answer
D:
This gathers targeted diagnostic logs without destructive remediation
Incorrect Answers
A:
Wipe removes evidence and user state
B:
Retirement removes management and is not log collection
C:
Directory membership is not the endpoint log bundle
Question 449
A support team must collect diagnostics from a failing Intune-managed Windows laptop that frequently disconnects from the network. The collection action is Pending while the affected laptop stays offline for several hours. What does Pending mean here?
Logs are already verified and ready to download by definition of Pending
The device has an Intune device-action entry marked Pending, and its last check-in predates the remote command
The remote command has not yet successfully executed or returned diagnostics because the device has not connected to process it
The users Teams app displayed a warning banner
Explanation
Correct Answer
C:
Remote tasks depend on device communication and completion state
Incorrect Answers
A:
Pending is not confirmed completion
B:
Pending status and a stale check-in indicate the command may not have run yet; they are observations supporting the keyed explanation, not evidence of completed diagnostics collection.
D:
A notification is not the remote diagnostic action status
Question 450
A support team must collect diagnostics from a failing Intune-managed Windows laptop that frequently disconnects from the network. Which result proves diagnostics were collected from the affected endpoint?
The admin can click Collect diagnostics but has not run it
The device appears as Disconnected in the inventory list without a log package
A zip file from another computers diagnostic session exists locally
The specific remote action reports completion and an authorized diagnostic log package for the correct device is available to inspect
Explanation
Correct Answer
D:
Tests action identity, delivery and evidence availability
Incorrect Answers
A:
Button visibility is not a completed action
B:
Inventory state does not provide collected diagnostics
Our team works hard to provide students with high exam practice test questions and compelling learning experiences. We're confident of the quality level of the products we offer and provide no hassle satisfaction guarantee.
Why choose Exam-Labs?613,693+Satisfied Customers since 2015
100% Latest Exam Questions
Accurate & Updated Answers
Regular Free Updates
24/7 Customer Support
Instant Download
Exam Info
Microsoft MD-102 Practice Test Questions, Microsoft MD-102 Exam Practice Test Questions
Looking to pass your tests the first time. You can study with Microsoft MD-102 certification practice test questions and answers, study guide, training courses. With Exam-Labs VCE files you can prepare with Microsoft MD-102 Endpoint Administrator exam practice test questions and answers. The most complete solution for passing with Microsoft certification MD-102 exam practice test questions and answers, study guide, training course.
Microsoft MD-102: Managing and Securing Microsoft 365 Endpoints
Microsoft exam MD-102, Managing and Securing Microsoft 365 Endpoints by using Intune, is active as of October 1, 2026. Microsoft’s current skills outline, effective July 24, 2026, covers preparing infrastructure for devices, enrolling endpoints into Microsoft Entra ID and Microsoft Intune, implementing identity and compliance, managing and maintaining devices, managing and securing applications, protecting endpoints, and optimizing operations through automation, monitoring, and reporting.
Microsoft has also published a further English-language blueprint update for October 27, 2026. Because that date is still in the future, candidates taking the exam on October 1 should study the July 24 objectives and review the upcoming change log only if their scheduled exam will occur after the update. The Endpoint Administrator transition provides useful role context, but Microsoft’s live study guide remains the blueprint authority.
Endpoint administration begins with identity and enrollment architecture
Devices need an identity relationship with the organization before policies, applications, and access controls can be applied reliably. MD-102 candidates should understand Microsoft Entra join and registration concepts, enrollment methods, automatic enrollment, device platforms, ownership, and the prerequisites that make large-scale onboarding predictable. A manual process that works for ten devices may fail operationally when thousands of endpoints must be provisioned.
Practice should compare different onboarding scenarios: corporate Windows devices, personally owned mobile devices, shared or frontline devices, and replacement hardware. Ask what identity state is required, how the device reaches Intune, which user or group receives policy, and how the organization proves enrollment completed successfully.
Enrollment design also has licensing and platform-support implications. Some capabilities depend on Intune licensing, Microsoft Entra features, platform version, ownership type, or enrollment method. A candidate should learn to read a scenario for those prerequisites before choosing a configuration. Troubleshooting is faster when the administrator first verifies that the chosen management method is supported for the device and user population.
Windows Autopilot turns deployment into an identity-driven provisioning process
Modern Windows deployment increasingly separates device provisioning from traditional image-heavy workflows. Windows Autopilot can use hardware identity, deployment profiles, enrollment status controls, and cloud-delivered configuration so a device moves from factory state toward organizational readiness with less local intervention. Candidates need to understand where Autopilot fits and what infrastructure it still depends on.
A good lab resets a device or virtual machine and traces the complete provisioning experience. Observe when the user authenticates, when Entra identity is established, when Intune enrollment occurs, which profiles and apps arrive, and what can block the process. Troubleshooting Autopilot becomes much easier when candidates know the sequence rather than memorizing isolated settings.
Autopilot preparation should include hardware replacement and reset scenarios, not only first deployment. Organizations may reuse devices for different users, redeploy them after repair, or convert existing hardware into cloud-managed workflows. Understanding reset options, enrollment records, and device identity helps administrators avoid duplicate objects and ensures the correct profile is applied when a device changes hands.
Configuration profiles translate policy into repeatable endpoint state
Intune supports settings catalogs, templates, device restrictions, security baselines, certificates, Wi-Fi, VPN, and many other configuration mechanisms. MD-102 questions often test the ability to choose the correct policy type and scope. Overlapping profiles can create conflict, while weak targeting can leave devices unmanaged or apply controls to the wrong population.
Study by building a small policy hierarchy and documenting intent. Create baseline settings, add role-specific requirements, and then introduce a conflicting setting deliberately. Review reporting and determine which policy wins or where remediation is needed. This turns policy precedence from an abstract rule into observable endpoint behavior.
Configuration profiles also need assignment strategy. Dynamic groups, filters, platform targeting, exclusions, and phased rollout can reduce the risk of applying a disruptive setting to every device at once. Candidates should practice releasing a policy to a pilot group, checking reporting, and expanding deployment only after the result is understood. This is both a technical and an operational control.
Compliance and Conditional Access connect device health to resource access
A compliant-device signal is valuable because it can participate in access decisions, but compliance policy and Conditional Access are different layers. Intune evaluates whether a device meets defined requirements, while Entra Conditional Access can use that state with identity, application, location, risk, and other conditions to decide whether access should be granted.
Hands-on scenarios should test both layers. Mark a device noncompliant by violating a requirement, observe the reporting delay or remediation path, and then see how a Conditional Access policy changes the user experience. This clarifies why a compliance rule does not automatically block a resource unless access policy is configured to use it.
Compliance design should distinguish remediation grace periods from immediate enforcement. Some organizations allow users time to correct encryption, password, or threat conditions before access is restricted; others require immediate action for high-risk states. The exam can present the same technical control in different business contexts, so candidates should reason from the required risk posture rather than assume one universal setting.
Application management spans deployment, protection, configuration, and updates
MD-102 includes deploying and updating applications, configuring app protection and app configuration policies, and securing organizational data across managed and unmanaged devices. Candidates should understand app types, assignments, detection logic, dependencies, supersedence, mobile application management, and the distinction between managing the whole device and protecting data inside supported applications.
A useful lab deploys one Win32 app and one mobile application, then adds an app protection policy to a personally owned device scenario. Test what happens when data is copied to an unmanaged app or when an installation detection rule is wrong. These exercises reveal how application management depends on both packaging and policy design.
Application deployment at scale also depends on accurate detection and requirement logic. If Intune cannot reliably determine whether an app is already installed, devices may reinstall it repeatedly or report false failures. Practice should include testing install and uninstall commands, exit codes, dependencies, and detection rules outside the portal before assigning a package to production groups.
Endpoint security requires coordinated controls rather than one security switch
Security settings can span antivirus, firewall, disk encryption, attack surface reduction, account protection, security baselines, Defender for Endpoint integration, local privileges, and other controls. Candidates need to understand which service owns a setting and how the controls work together. Duplicating the same configuration through multiple mechanisms can make troubleshooting difficult.
The Microsoft Intune security discussion is most useful when paired with a lab that traces a security requirement from policy assignment to device state and reporting. The goal is not to enable every control, but to implement a deliberate security posture.
Endpoint security reporting should be treated as an operational feedback loop. A policy is not complete when it is assigned; administrators need to know which devices succeeded, which are pending, which conflict with another setting, and which users require remediation. This habit connects configuration, monitoring, and support and matches the increasingly operational emphasis of the current MD-102 blueprint.
Remote actions and lifecycle operations keep managed devices supportable
Endpoint administrators perform wipe, retire, sync, restart, remote lock, passcode reset, device cleanup, and other lifecycle operations. The correct action depends on ownership and business context. Retiring a personally owned device should protect organizational data without unnecessarily destroying personal content, while a lost corporate device may require a stronger response.
Scenario practice should include joiners, movers, leavers, lost devices, stale records, and ownership changes. For each scenario, identify what happens in Intune, Entra ID, application access, and corporate data. This helps candidates reason about the endpoint lifecycle instead of treating remote actions as interchangeable buttons.
Windows 365 and cloud PC scenarios add another endpoint type to the administrator’s mental model. The device experience may be virtual, but identity, access, policy, application delivery, and security still need coordinated management. Candidates should avoid assuming that virtual endpoints eliminate endpoint administration; they change provisioning and infrastructure boundaries while preserving many policy responsibilities.
Automation, monitoring, and reporting are now explicit endpoint-admin skills
The July 2026 blueprint added a distinct emphasis on automating management tasks and monitoring endpoint health. Modern administrators use PowerShell, Microsoft Graph, Intune reporting, analytics, remediation capabilities, and health information to manage fleets at scale. The exam increasingly reflects the reality that manual portal work does not scale to large environments.
Candidates should be able to identify what should be automated, how to scope an action safely, and which telemetry proves that the change worked. A script that changes thousands of devices needs safeguards, logging, and rollback thinking. The MD-102 endpoint administration material can provide structure, but automation practice should use realistic operational tasks.
Intune Suite add-on capabilities also require candidates to distinguish core management from optional advanced features. A scenario may mention remote assistance, privilege management, analytics, or specialized security capabilities that depend on additional licensing. Before selecting a feature, verify whether the organization actually has the required service and whether the capability is appropriate for the device population.
MD-102 preparation should use a mixed-device lab and a dated blueprint
A strong capstone environment includes at least a Windows endpoint and a mobile-device scenario, Entra identities and groups, Intune enrollment, configuration profiles, compliance, applications, endpoint security, Conditional Access integration, remote actions, and reporting. Work through the lifecycle from enrollment to retirement and deliberately create failures that require diagnosis.
Candidates should also be date-conscious. The July 24, 2026 skills outline is active on October 1; Microsoft’s October 27 update is upcoming. The MD-102 endpoint-administration role is useful for broad context, while the official study guide determines the objectives that apply on the actual exam date.
The upcoming October 27 blueprint should be reviewed only when it affects the candidate’s scheduled date. Microsoft often publishes future objectives in advance so learners can prepare for a transition. That does not mean the future outline becomes active immediately. Date discipline prevents candidates from studying the wrong weighting or assuming a newly announced feature is already being assessed.
Use Microsoft MD-102 certification exam practice test questions, study guide and training course - the complete package at discounted price. Pass with MD-102 Endpoint Administrator practice test questions and answers, study guide, complete training course especially formatted in VCE files. Latest Microsoft certification MD-102 exam practice test questions and answers will guarantee your success without studying for endless hours.
FAQs
Microsoft MD-102 Exam Practice Test Questions, Microsoft MD-102 Practice Test Questions and Answers
Do you have questions about our MD-102 Endpoint Administrator practice test questions and answers or any of our products? If you are not clear about our Microsoft MD-102 exam practice test questions, you can read the FAQ below.
The MD-102 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.
MD-102 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates MD-102 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.
What is VCE?
VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.
Can I try it for free?
Yes, you can. Look through free VCE files section and download any file you choose absolutely free.
Where do I get VCE Exam Simulator?
VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.
How are Premium VCE files different from Free VCE files?
Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.
Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.
How long will I receive updates for MD-102 Premium VCE File that I purchased?
Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.
How can I get the products after purchase?
All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.
Will I be able to renew my products when they expire?
Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.
Please note that you will not be able to use the product after it has expired if you don't renew it.
How often are the questions updated?
We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.
What is a Study Guide?
Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.
How can I open a Study Guide?
Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.
What is a Training Course?
Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Certification/Exam.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Demo.
How It Works
Step 1. Choose Exam on Exam-Labs
Download IT Exams Questions & Answers
Step 2. Open Exam with Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment