Endpoint Administrator MD-102 Practice Test 43
Question 420
An international services company is implementing an endpoint standard; the pilot cohort is scoped to one region. For the scenario in which several assigned Windows devices must restart after a controlled update window, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- On a pilot device, verify that this configuration is deployed and record its runtime result: issue a wipe to every device instead of a restart
- On a pilot device, verify that this configuration is deployed and record its runtime result: run a sync action and treat it as immediate OS restart
- Compare action results for exactly the approved devices and no others
- On a pilot device, verify that this configuration is deployed and record its runtime result: restart all managed devices rather than the approved pilot selection
Explanation
Correct Answer
C:Compare action results for exactly the approved devices and no others. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Use the supported Intune bulk remote restart action with precise device targeting. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
A:On a pilot device, verify that this configuration is deployed and record its runtime result: issue a wipe to every device instead of a restart. A wipe is destructive and does not preserve endpoint state.
B:On a pilot device, verify that this configuration is deployed and record its runtime result: run a sync action and treat it as immediate OS restart. Policy synchronization and reboot are distinct remote operations.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: restart all managed devices rather than the approved pilot selection. Unrestricted scope violates the specified change window.
Question 421
A regulated insurance provider is implementing an endpoint standard; change control requires auditable deployment evidence. The requirement is that a user needs a rotated Windows BitLocker recovery key after an authorized recovery event. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Rotate the Windows LAPS local administrator password and call it a BitLocker rotation
- Remove disk encryption policies and assume the recovery secret changes
- Restart the Windows device as proof the recovery key was regenerated
- Use supported Intune remote BitLocker key rotation with verified device and privileges
Explanation
Correct Answer
D:Use supported Intune remote BitLocker key rotation with verified device and privileges. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in a user needs a rotated Windows BitLocker recovery key after an authorized recovery event. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Rotate the Windows LAPS local administrator password and call it a BitLocker rotation. Local admin credentials differ from disk recovery keys.
B:Remove disk encryption policies and assume the recovery secret changes. Removing configuration does not constitute controlled key rotation.
C:Restart the Windows device as proof the recovery key was regenerated. A restart alone is not a key rotation command.
Question 422
A regulated insurance provider is implementing an endpoint standard; change control requires auditable deployment evidence. During a pilot, the team finds that a user needs a rotated Windows BitLocker recovery key after an authorized recovery event, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Inspect the effective assignment and applicable runtime state, then use supported Intune remote BitLocker key rotation with verified device and privileges
- Rotate the Windows LAPS local administrator password and call it a BitLocker rotation
- Remove disk encryption policies and assume the recovery secret changes
- Restart the Windows device as proof the recovery key was regenerated
Explanation
Correct Answer
A:Inspect the effective assignment and applicable runtime state, then use supported Intune remote BitLocker key rotation with verified device and privileges. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Use supported Intune remote BitLocker key rotation with verified device and privileges. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
B:Rotate the Windows LAPS local administrator password and call it a BitLocker rotation. Local admin credentials differ from disk recovery keys.
C:Remove disk encryption policies and assume the recovery secret changes. Removing configuration does not constitute controlled key rotation.
D:Restart the Windows device as proof the recovery key was regenerated. A restart alone is not a key rotation command.
Question 423
A regulated insurance provider is implementing an endpoint standard; change control requires auditable deployment evidence. For the scenario in which a user needs a rotated Windows BitLocker recovery key after an authorized recovery event, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- Check the device recovery key ID changes after the authorized remote action
- On a pilot device, verify that this configuration is deployed and record its runtime result: rotate the Windows LAPS local administrator password and call it a BitLocker rotation
- On a pilot device, verify that this configuration is deployed and record its runtime result: remove disk encryption policies and assume the recovery secret changes
- On a pilot device, verify that this configuration is deployed and record its runtime result: restart the Windows device as proof the recovery key was regenerated
Explanation
Correct Answer
A:Check the device recovery key ID changes after the authorized remote action. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Use supported Intune remote BitLocker key rotation with verified device and privileges. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
B:On a pilot device, verify that this configuration is deployed and record its runtime result: rotate the Windows LAPS local administrator password and call it a BitLocker rotation. Local admin credentials differ from disk recovery keys.
C:On a pilot device, verify that this configuration is deployed and record its runtime result: remove disk encryption policies and assume the recovery secret changes. Removing configuration does not constitute controlled key rotation.
D:On a pilot device, verify that this configuration is deployed and record its runtime result: restart the Windows device as proof the recovery key was regenerated. A restart alone is not a key rotation command.
Question 424
A national retail chain is implementing an endpoint standard; devices across its branches need consistent configuration. The requirement is that Endpoint troubleshooting requires collected diagnostics rather than a destructive reset. Which Intune/Microsoft endpoint management decision BEST meets this requirement?
- Retire the device to obtain diagnostic logs
- Use a Windows Update ring as the diagnostic collection mechanism
- Run an Intune collect diagnostics action or device KQL query appropriate to the investigation
- Rotate the local administrator password as a substitute for process/system diagnostics
Explanation
Correct Answer
C:Run an Intune collect diagnostics action or device KQL query appropriate to the investigation. This directly selects the appropriate endpoint-management control for the stated device and user boundary. The decisive distinction is whether the chosen management mechanism actually enforces the requirement in endpoint troubleshooting requires collected diagnostics rather than a destructive reset. Confirm on targeted and excluded devices; validate licensing, platform, identity, and policy evaluation rather than assuming that portal assignment alone proves enforcement.
Incorrect Answers
A:Retire the device to obtain diagnostic logs. Retirement removes management data and does not gather the requested logs.
B:Use a Windows Update ring as the diagnostic collection mechanism. Update policies do not capture current device diagnostics.
D:Rotate the local administrator password as a substitute for process/system diagnostics. Password rotation does not retrieve operational failure evidence.
Question 425
A national retail chain is implementing an endpoint standard; devices across its branches need consistent configuration. During a pilot, the team finds that Endpoint troubleshooting requires collected diagnostics rather than a destructive reset, but the intended control is not reliably in effect. Which troubleshooting action should be performed FIRST to isolate the relevant management boundary?
- Inspect the effective assignment and applicable runtime state, then run an Intune collect diagnostics action or device KQL query appropriate to the investigation
- Retire the device to obtain diagnostic logs
- Use a Windows Update ring as the diagnostic collection mechanism
- Rotate the local administrator password as a substitute for process/system diagnostics
Explanation
Correct Answer
A:Inspect the effective assignment and applicable runtime state, then run an Intune collect diagnostics action or device KQL query appropriate to the investigation. Begin by confirming the effective assigned policy and device identity before changing unrelated settings. The substantive remediation is: Run an Intune collect diagnostics action or device KQL query appropriate to the investigation. When the configured control, its target scope, and the runtime state agree, the investigated failure mode can be isolated without a broad destructive reset.
Incorrect Answers
B:Retire the device to obtain diagnostic logs. Retirement removes management data and does not gather the requested logs.
C:Use a Windows Update ring as the diagnostic collection mechanism. Update policies do not capture current device diagnostics.
D:Rotate the local administrator password as a substitute for process/system diagnostics. Password rotation does not retrieve operational failure evidence.
Question 426
A national retail chain is implementing an endpoint standard; devices across its branches need consistent configuration. For the scenario in which Endpoint troubleshooting requires collected diagnostics rather than a destructive reset, the administrator needs evidence that the requirement is actually enforced. Which verification provides the MOST DIRECT evidence?
- On a pilot device, verify that this configuration is deployed and record its runtime result: retire the device to obtain diagnostic logs
- On a pilot device, verify that this configuration is deployed and record its runtime result: use a Windows Update ring as the diagnostic collection mechanism
- On a pilot device, verify that this configuration is deployed and record its runtime result: rotate the local administrator password as a substitute for process/system diagnostics
- Check diagnostics upload status and inspect the actual log bundle or query result
Explanation
Correct Answer
D:Check diagnostics upload status and inspect the actual log bundle or query result. This discriminates true enforcement from a policy that is merely listed or assigned. Use an authorized pilot device and compare the observed result with the expected control: Run an Intune collect diagnostics action or device KQL query appropriate to the investigation. Check platform and identity requirements and preserve the published test outcome as evidence.
Incorrect Answers
A:On a pilot device, verify that this configuration is deployed and record its runtime result: retire the device to obtain diagnostic logs. Retirement removes management data and does not gather the requested logs.
B:On a pilot device, verify that this configuration is deployed and record its runtime result: use a Windows Update ring as the diagnostic collection mechanism. Update policies do not capture current device diagnostics.
C:On a pilot device, verify that this configuration is deployed and record its runtime result: rotate the local administrator password as a substitute for process/system diagnostics. Password rotation does not retrieve operational failure evidence.
Question 427
An employee leaves a company but keeps their own Android phone enrolled with a personally owned work profile. IT needs to remove only enterprise apps and data. Which Intune action is appropriate?
- Use Wipe to factory-reset the user’s personally owned handset
- Delete the user’s mailbox but leave the old Intune work profile intact
- Retire the personally owned Android Enterprise work-profile device to remove the managed work profile without factory-resetting personal data
- Send Restart and assume the managed profile disappears
Explanation
Correct Answer
C:Retire removes organization-managed workspace on personal Android; a full-device wipe is not available or appropriate for this enrollment type.
Incorrect Answers
A:A full factory reset would erase unrelated personal content and is not supported as a standard work-profile action.
B:Mailbox deletion alone does not remove cached applications, certificates and policies in the managed work profile.
D:Restart cannot retire an enrolled device or selectively remove its corporate data.
Question 428
The admin submitted Retire for a personal Android phone, but the device still appears in Intune and has not connected since the request. Which timing behavior explains the delay?
- Retire always factory-resets the handset immediately on submission
- Retire is processed when the device next communicates with Intune; a pending request alone is not proof the work profile has been removed
- The retire request needs the same wipe permission used for factory resets
- The device must first complete an Autopilot-like provisioning session after retirement
Explanation
Correct Answer
B:Intune device retirement is device-check-in dependent, so stale inventory visibility may persist before action execution.
Incorrect Answers
A:The documented action preserves personal data and depends on successful device contact.
C:Retire has its own Remote tasks/Retire permission; the question’s unresolved state is the phone being offline.
D:An enrolled personal Android phone processes Retire on management check-in, not a Windows-style re-provisioning flow.
Question 429
The user reconnects their personally owned Android phone after Intune Retire. Which observation distinguishes proper corporate removal from destructive wipe?
- The work profile and organization-managed apps/settings disappear while the separate personal profile and photos remain
- The phone is reset to out-of-box setup with personal content erased
- The admin portal shows the Retire request as Submitted but the work profile remains
- The employee can still open the company’s managed app and view cached work documents
Explanation
Correct Answer
A:This directly checks selective removal of enterprise data without the personal-device destruction that policy forbids.
Incorrect Answers
B:That would indicate a destructive full wipe rather than the requested work-profile retirement.
C:Submitted state without execution does not show enterprise data was removed.
D:Retained managed enterprise data would violate the offboarding requirement.
Question 430
After a tested driver fix, a branch IT team must restart exactly 18 approved Intune-managed Windows laptops, not all enrolled devices. How should the operator submit the restart?
- Use Bulk device actions, choose Windows and Restart, explicitly select the 18 approved device records, and review the target list before creating the action.
- Select Restart with All devices as the device set and trust the ticket attachment to limit it.
- Choose Wipe for all Windows devices because it includes a reboot.
- Trigger a device sync instead and mark it as a completed restart.
Explanation
Correct Answer
A:Bulk actions require platform/action selection and an explicit target-device list, reducing accidental wider changes.
Incorrect Answers
B:The ticket is not an enforcement scope; the action list must match the 18 approved IDs.
C:Wipe erases data and is not a restart-only operation.
D:A management sync does not request a Windows restart.