Microsoft Azure Administrator AZ-104 Practice Test 28
Question 270
An architect needs to reserve address space for future internal hosts. What should determine subnet CIDR sizing?
Expected host count and Azure-reserved addresses within each subnet
Add an appropriate nonoverlapping VNet address space and create a subnet in it
Select a nonoverlapping prefix within the VNet address space
A static private IP assignment on the VM NIC within its subnet
Explanation
Correct Answer
A:
Address capacity planning prevents exhausting usable IPs as services scale. The relevant situation is that an architect needs to reserve address space for future internal hosts. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Add an appropriate nonoverlapping VNet address space and create a subnet in it” does not settle this requirement: subnet addresses must fit within the VNet's configured address spaces. “Select a nonoverlapping prefix within the VNet address space” does not settle this requirement: azure subnets in the same virtual network cannot occupy overlapping IP address ranges. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
B:
subnet addresses must fit within the VNet's configured address spaces. In this case, an architect needs to reserve address space for future internal hosts. “Add an appropriate nonoverlapping VNet address space and create a subnet in it” would not satisfy that requirement; the supported action is “Expected host count and Azure-reserved addresses within each subnet”. Address capacity planning prevents exhausting usable IPs as services scale.
C:
azure subnets in the same virtual network cannot occupy overlapping IP address ranges. In this case, an architect needs to reserve address space for future internal hosts. “Select a nonoverlapping prefix within the VNet address space” would not satisfy that requirement; the supported action is “Expected host count and Azure-reserved addresses within each subnet”. Address capacity planning prevents exhausting usable IPs as services scale.
D:
a static private address can preserve the reachable target while respecting subnet address allocation. In this case, an architect needs to reserve address space for future internal hosts. “A static private IP assignment on the VM NIC within its subnet” would not satisfy that requirement; the supported action is “Expected host count and Azure-reserved addresses within each subnet”. Address capacity planning prevents exhausting usable IPs as services scale.
Question 271
Two VM subnets in one VNet cannot communicate after NSG changes. What should be inspected?
A static private IP assignment on the VM NIC within its subnet
The NIC IP configuration's subnet resource ID
Subnet/NIC NSGs and effective routes between the subnets
Separate subnets within a VNet, each with a nonoverlapping CIDR range
Explanation
Correct Answer
C:
VNet internal routing normally exists, so security rules or custom routes may block communication. The relevant situation is that two VM subnets in one VNet cannot communicate after NSG changes. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “A static private IP assignment on the VM NIC within its subnet” does not settle this requirement: a static private address can preserve the reachable target while respecting subnet address allocation. “The NIC IP configuration's subnet resource ID” does not settle this requirement: a NIC joins a VNet through a specific subnet reference. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
a static private address can preserve the reachable target while respecting subnet address allocation. In this case, two VM subnets in one VNet cannot communicate after NSG changes. “A static private IP assignment on the VM NIC within its subnet” would not satisfy that requirement; the supported action is “Subnet/NIC NSGs and effective routes between the subnets”. VNet internal routing normally exists, so security rules or custom routes may block communication.
B:
a NIC joins a VNet through a specific subnet reference. In this case, two VM subnets in one VNet cannot communicate after NSG changes. “The NIC IP configuration's subnet resource ID” would not satisfy that requirement; the supported action is “Subnet/NIC NSGs and effective routes between the subnets”. VNet internal routing normally exists, so security rules or custom routes may block communication.
D:
subnet boundaries partition VNet address space so security and routing controls can be applied differently. In this case, two VM subnets in one VNet cannot communicate after NSG changes. “Separate subnets within a VNet, each with a nonoverlapping CIDR range” would not satisfy that requirement; the supported action is “Subnet/NIC NSGs and effective routes between the subnets”. VNet internal routing normally exists, so security rules or custom routes may block communication.
Question 272
A deployment needs to place a network interface in a selected subnet. Which resource property is central?
The NIC IP configuration's subnet resource ID
A static private IP assignment on the VM NIC within its subnet
Subnet/NIC NSGs and effective routes between the subnets
An Azure public IP address associated with an appropriate entry point
Explanation
Correct Answer
A:
A NIC joins a VNet through a specific subnet reference. The relevant situation is that a deployment needs to place a network interface in a selected subnet. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “A static private IP assignment on the VM NIC within its subnet” does not settle this requirement: a static private address can preserve the reachable target while respecting subnet address allocation. “Subnet/NIC NSGs and effective routes between the subnets” does not settle this requirement: vNet internal routing normally exists, so security rules or custom routes may block communication. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
B:
a static private address can preserve the reachable target while respecting subnet address allocation. In this case, a deployment needs to place a network interface in a selected subnet. “A static private IP assignment on the VM NIC within its subnet” would not satisfy that requirement; the supported action is “The NIC IP configuration's subnet resource ID”. A NIC joins a VNet through a specific subnet reference.
C:
vNet internal routing normally exists, so security rules or custom routes may block communication. In this case, a deployment needs to place a network interface in a selected subnet. “Subnet/NIC NSGs and effective routes between the subnets” would not satisfy that requirement; the supported action is “The NIC IP configuration's subnet resource ID”. A NIC joins a VNet through a specific subnet reference.
D:
an Azure public IP can expose approved inbound access when combined with suitable routing and firewall policy. In this case, a deployment needs to place a network interface in a selected subnet. “An Azure public IP address associated with an appropriate entry point” would not satisfy that requirement; the supported action is “The NIC IP configuration's subnet resource ID”. A NIC joins a VNet through a specific subnet reference.
Question 273
A user wants a network to span two regions as one regional VNet. What is the correct boundary?
Create separate regional VNets and connect them as needed
Separate subnets within a VNet, each with a nonoverlapping CIDR range
Add an appropriate nonoverlapping VNet address space and create a subnet in it
The NIC IP configuration's subnet resource ID
Explanation
Correct Answer
A:
Azure virtual networks are region-scoped resources rather than a single cross-region VNet. The relevant situation is that a user wants a network to span two regions as one regional VNet. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Separate subnets within a VNet, each with a nonoverlapping CIDR range” does not settle this requirement: subnet boundaries partition VNet address space so security and routing controls can be applied differently. “Add an appropriate nonoverlapping VNet address space and create a subnet in it” does not settle this requirement: subnet addresses must fit within the VNet's configured address spaces. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
B:
subnet boundaries partition VNet address space so security and routing controls can be applied differently. In this case, a user wants a network to span two regions as one regional VNet. “Separate subnets within a VNet, each with a nonoverlapping CIDR range” would not satisfy that requirement; the supported action is “Create separate regional VNets and connect them as needed”. Azure virtual networks are region-scoped resources rather than a single cross-region VNet.
C:
subnet addresses must fit within the VNet's configured address spaces. In this case, a user wants a network to span two regions as one regional VNet. “Add an appropriate nonoverlapping VNet address space and create a subnet in it” would not satisfy that requirement; the supported action is “Create separate regional VNets and connect them as needed”. Azure virtual networks are region-scoped resources rather than a single cross-region VNet.
D:
a NIC joins a VNet through a specific subnet reference. In this case, a user wants a network to span two regions as one regional VNet. “The NIC IP configuration's subnet resource ID” would not satisfy that requirement; the supported action is “Create separate regional VNets and connect them as needed”. Azure virtual networks are region-scoped resources rather than a single cross-region VNet.
Question 274
Two different VNets must exchange private traffic without public Internet routing. What should be configured?
Virtual network peering with required reciprocal settings
Global virtual network peering when regional and subscription conditions allow
Use appropriate user-defined routes toward a hub firewall with required peering configuration
Both peering settings, effective routes and security rules
Explanation
Correct Answer
A:
Peering establishes private connectivity between configured VNets through Azure's backbone. The relevant situation is that two different VNets must exchange private traffic without public Internet routing. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Global virtual network peering when regional and subscription conditions allow” does not settle this requirement: global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” does not settle this requirement: uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
B:
global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. In this case, two different VNets must exchange private traffic without public Internet routing. “Global virtual network peering when regional and subscription conditions allow” would not satisfy that requirement; the supported action is “Virtual network peering with required reciprocal settings”. Peering establishes private connectivity between configured VNets through Azure's backbone.
C:
uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. In this case, two different VNets must exchange private traffic without public Internet routing. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” would not satisfy that requirement; the supported action is “Virtual network peering with required reciprocal settings”. Peering establishes private connectivity between configured VNets through Azure's backbone.
D:
peering connectivity depends on peer configuration and does not bypass NSGs or UDRs. In this case, two different VNets must exchange private traffic without public Internet routing. “Both peering settings, effective routes and security rules” would not satisfy that requirement; the supported action is “Virtual network peering with required reciprocal settings”. Peering establishes private connectivity between configured VNets through Azure's backbone.
Question 275
A peering connection shows Connected on one side but traffic is not flowing between address spaces. What should be reviewed?
Both peering settings, effective routes and security rules
The subnet's associated route table and effective routes
Virtual network peering with required reciprocal settings
Global virtual network peering when regional and subscription conditions allow
Explanation
Correct Answer
A:
Peering connectivity depends on peer configuration and does not bypass NSGs or UDRs. The relevant situation is that a peering connection shows Connected on one side but traffic is not flowing between address spaces. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “The subnet's associated route table and effective routes” does not settle this requirement: user-defined routes can override system routes and redirect traffic away from a reachable peer. “Virtual network peering with required reciprocal settings” does not settle this requirement: peering establishes private connectivity between configured VNets through Azure's backbone. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
B:
user-defined routes can override system routes and redirect traffic away from a reachable peer. In this case, a peering connection shows Connected on one side but traffic is not flowing between address spaces. “The subnet's associated route table and effective routes” would not satisfy that requirement; the supported action is “Both peering settings, effective routes and security rules”. Peering connectivity depends on peer configuration and does not bypass NSGs or UDRs.
C:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, a peering connection shows Connected on one side but traffic is not flowing between address spaces. “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “Both peering settings, effective routes and security rules”. Peering connectivity depends on peer configuration and does not bypass NSGs or UDRs.
D:
global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. In this case, a peering connection shows Connected on one side but traffic is not flowing between address spaces. “Global virtual network peering when regional and subscription conditions allow” would not satisfy that requirement; the supported action is “Both peering settings, effective routes and security rules”. Peering connectivity depends on peer configuration and does not bypass NSGs or UDRs.
Question 276
An organization plans to peer VNets with overlapping CIDR prefixes. What must change first?
No; VNet peering is not transitively routed by default
Renumber or redesign the overlapping address spaces
Virtual network peering with required reciprocal settings
Global virtual network peering when regional and subscription conditions allow
Explanation
Correct Answer
B:
Overlapping IP ranges prevent a valid unambiguous peering network design. The relevant situation is that an organization plans to peer VNets with overlapping CIDR prefixes. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “No; VNet peering is not transitively routed by default” does not settle this requirement: a-B and B-C peerings do not automatically create A-C connectivity without additional routing design. “Virtual network peering with required reciprocal settings” does not settle this requirement: peering establishes private connectivity between configured VNets through Azure's backbone. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
a-B and B-C peerings do not automatically create A-C connectivity without additional routing design. In this case, an organization plans to peer VNets with overlapping CIDR prefixes. “No; VNet peering is not transitively routed by default” would not satisfy that requirement; the supported action is “Renumber or redesign the overlapping address spaces”. Overlapping IP ranges prevent a valid unambiguous peering network design.
C:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, an organization plans to peer VNets with overlapping CIDR prefixes. “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “Renumber or redesign the overlapping address spaces”. Overlapping IP ranges prevent a valid unambiguous peering network design.
D:
global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. In this case, an organization plans to peer VNets with overlapping CIDR prefixes. “Global virtual network peering when regional and subscription conditions allow” would not satisfy that requirement; the supported action is “Renumber or redesign the overlapping address spaces”. Overlapping IP ranges prevent a valid unambiguous peering network design.
Question 277
Three VNets are peered A-to-B and B-to-C. Can A automatically reach C through those peerings alone?
Global virtual network peering when regional and subscription conditions allow
Virtual network peering with required reciprocal settings
No; VNet peering is not transitively routed by default
Use appropriate user-defined routes toward a hub firewall with required peering configuration
Explanation
Correct Answer
C:
A-B and B-C peerings do not automatically create A-C connectivity without additional routing design. The relevant situation is that three VNets are peered A-to-B and B-to-C. Can A automatically reach C through those peerings alone? VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Global virtual network peering when regional and subscription conditions allow” does not settle this requirement: global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. “Virtual network peering with required reciprocal settings” does not settle this requirement: peering establishes private connectivity between configured VNets through Azure's backbone. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
global peering connects regional VNets over Microsoft's backbone rather than Internet-facing endpoints. In this case, three VNets are peered A-to-B and B-to-C. Can A automatically reach C through those peerings alone? “Global virtual network peering when regional and subscription conditions allow” would not satisfy that requirement; the supported action is “No; VNet peering is not transitively routed by default”. A-B and B-C peerings do not automatically create A-C connectivity without additional routing design.
B:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, three VNets are peered A-to-B and B-to-C. Can A automatically reach C through those peerings alone? “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “No; VNet peering is not transitively routed by default”. A-B and B-C peerings do not automatically create A-C connectivity without additional routing design.
D:
uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. In this case, three VNets are peered A-to-B and B-to-C. Can A automatically reach C through those peerings alone? “Use appropriate user-defined routes toward a hub firewall with required peering configuration” would not satisfy that requirement; the supported action is “No; VNet peering is not transitively routed by default”. A-B and B-C peerings do not automatically create A-C connectivity without additional routing design.
Question 278
A spoke VNet must send Internet-bound traffic through a central firewall in a hub. Which approach is relevant?
Virtual network peering with required reciprocal settings
Gateway transit and use-remote-gateway options under supported peering design
Use appropriate user-defined routes toward a hub firewall with required peering configuration
Both peering settings, effective routes and security rules
Explanation
Correct Answer
C:
UDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. The relevant situation is that a spoke VNet must send Internet-bound traffic through a central firewall in a hub. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Virtual network peering with required reciprocal settings” does not settle this requirement: peering establishes private connectivity between configured VNets through Azure's backbone. “Gateway transit and use-remote-gateway options under supported peering design” does not settle this requirement: gateway sharing requires explicit peering options and valid hub/spoke route architecture. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, a spoke VNet must send Internet-bound traffic through a central firewall in a hub. “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “Use appropriate user-defined routes toward a hub firewall with required peering configuration”. UDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured.
B:
gateway sharing requires explicit peering options and valid hub/spoke route architecture. In this case, a spoke VNet must send Internet-bound traffic through a central firewall in a hub. “Gateway transit and use-remote-gateway options under supported peering design” would not satisfy that requirement; the supported action is “Use appropriate user-defined routes toward a hub firewall with required peering configuration”. UDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured.
D:
peering connectivity depends on peer configuration and does not bypass NSGs or UDRs. In this case, a spoke VNet must send Internet-bound traffic through a central firewall in a hub. “Both peering settings, effective routes and security rules” would not satisfy that requirement; the supported action is “Use appropriate user-defined routes toward a hub firewall with required peering configuration”. UDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured.
Question 279
A team needs remote branch networks to reach services behind a hub gateway via spokes. What configuration concept matters?
Use appropriate user-defined routes toward a hub firewall with required peering configuration
No; VNet peering is not transitively routed by default
Virtual network peering with required reciprocal settings
Gateway transit and use-remote-gateway options under supported peering design
Explanation
Correct Answer
D:
Gateway sharing requires explicit peering options and valid hub/spoke route architecture. The relevant situation is that a team needs remote branch networks to reach services behind a hub gateway via spokes. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” does not settle this requirement: uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. “No; VNet peering is not transitively routed by default” does not settle this requirement: a-B and B-C peerings do not automatically create A-C connectivity without additional routing design. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. In this case, a team needs remote branch networks to reach services behind a hub gateway via spokes. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” would not satisfy that requirement; the supported action is “Gateway transit and use-remote-gateway options under supported peering design”. Gateway sharing requires explicit peering options and valid hub/spoke route architecture.
B:
a-B and B-C peerings do not automatically create A-C connectivity without additional routing design. In this case, a team needs remote branch networks to reach services behind a hub gateway via spokes. “No; VNet peering is not transitively routed by default” would not satisfy that requirement; the supported action is “Gateway transit and use-remote-gateway options under supported peering design”. Gateway sharing requires explicit peering options and valid hub/spoke route architecture.
C:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, a team needs remote branch networks to reach services behind a hub gateway via spokes. “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “Gateway transit and use-remote-gateway options under supported peering design”. Gateway sharing requires explicit peering options and valid hub/spoke route architecture.
Question 280
A VNet peering exists but a VM still uses a route to an obsolete network appliance. What should be checked?
Both peering settings, effective routes and security rules
The subnet's associated route table and effective routes
Use appropriate user-defined routes toward a hub firewall with required peering configuration
Virtual network peering with required reciprocal settings
Explanation
Correct Answer
B:
User-defined routes can override system routes and redirect traffic away from a reachable peer. The relevant situation is that a VNet peering exists but a VM still uses a route to an obsolete network appliance. VNet peering, subnet addressing, user-defined routes and forwarding influence network paths independently. “Both peering settings, effective routes and security rules” does not settle this requirement: peering connectivity depends on peer configuration and does not bypass NSGs or UDRs. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” does not settle this requirement: uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. Use next-hop or effective-route evidence instead of assuming a route from a single setting.
Incorrect Answers
A:
peering connectivity depends on peer configuration and does not bypass NSGs or UDRs. In this case, a VNet peering exists but a VM still uses a route to an obsolete network appliance. “Both peering settings, effective routes and security rules” would not satisfy that requirement; the supported action is “The subnet's associated route table and effective routes”. User-defined routes can override system routes and redirect traffic away from a reachable peer.
C:
uDRs can steer egress to a virtual appliance when hub/spoke routing permissions are configured. In this case, a VNet peering exists but a VM still uses a route to an obsolete network appliance. “Use appropriate user-defined routes toward a hub firewall with required peering configuration” would not satisfy that requirement; the supported action is “The subnet's associated route table and effective routes”. User-defined routes can override system routes and redirect traffic away from a reachable peer.
D:
peering establishes private connectivity between configured VNets through Azure's backbone. In this case, a VNet peering exists but a VM still uses a route to an obsolete network appliance. “Virtual network peering with required reciprocal settings” would not satisfy that requirement; the supported action is “The subnet's associated route table and effective routes”. User-defined routes can override system routes and redirect traffic away from a reachable peer.
Microsoft Azure Administrator (AZ-104) Practice Tests
Our team works hard to provide students with high exam practice test questions and compelling learning experiences. We're confident of the quality level of the products we offer and provide no hassle satisfaction guarantee.
Why choose Exam-Labs?613,662+Satisfied Customers since 2015
100% Latest Exam Questions
Accurate & Updated Answers
Regular Free Updates
24/7 Customer Support
Instant Download
Exam Info
Microsoft Azure AZ-104 Practice Test Questions, Microsoft Azure AZ-104 Exam Practice Test Questions
Looking to pass your tests the first time. You can study with Microsoft Azure AZ-104 certification practice test questions and answers, study guide, training courses. With Exam-Labs VCE files you can prepare with Microsoft AZ-104 Microsoft Azure Administrator exam practice test questions and answers. The most complete solution for passing with Microsoft certification Azure AZ-104 exam practice test questions and answers, study guide, training course.
Microsoft AZ-104: Azure Administrator
Microsoft exam AZ-104, Microsoft Azure Administrator, is current as of October 1, 2026 and remains the core associate-level exam for administrators who implement, manage, and monitor Azure environments. Microsoft’s current blueprint, updated April 17, 2026, covers identities and governance, storage, compute, virtual networking, and monitoring. The associated Azure Administrator Associate credential is also an important prerequisite relationship for higher-level architecture work.
AZ-104 is broad because an Azure administrator rarely owns only one service. Real administration crosses Microsoft Entra ID, subscriptions, policy, storage, virtual machines, containers, App Service, networking, backup, monitoring, and automation. Candidates therefore need operational judgment: what to configure, where to apply it, how scope changes behavior, and how to troubleshoot when several Azure layers interact.
The exam also connects naturally to other roles. Networking specialists can deepen the virtual-networking material through AZ-700, while candidates moving toward architecture pair administrator experience with AZ-305. Across Microsoft certifications, AZ-104 is a practical administration foundation for roles that later specialize in networking, architecture, security, or other Azure disciplines.
Identity and governance determine who can change Azure and where those changes apply
Administrators should be comfortable with Microsoft Entra users and groups, external identities, licenses, self-service password reset, Azure roles, scopes, subscriptions, management groups, resource groups, tags, locks, budgets, and Azure Policy. These topics are related because access and governance become meaningful only when the candidate understands Azure’s hierarchy.
Azure role-based access control is especially important. A role definition describes permitted actions, while an assignment connects a security principal to that role at a scope. Exam scenarios often depend on inheritance, least privilege, and the difference between controlling Azure resources and managing identities themselves.
Storage questions are usually about access, resilience, lifecycle, and cost together
The blueprint includes storage accounts, redundancy, encryption, network restrictions, shared access signatures, stored access policies, access keys, identity-based access, Azure Files, Blob Storage, snapshots, soft delete, versioning, lifecycle rules, Azure Storage Explorer, and AzCopy. Rather than memorizing these as separate facts, candidates should understand the data-protection and access story they create.
Azure Blob Storage becomes easier to reason about when every scenario is reduced to who needs access, from where, for how long, with what recovery requirement, and at what expected access frequency. The correct combination of tiering, network controls, identity, redundancy, and retention follows from those constraints.
Compute administration now spans VMs, scale, containers, and App Service
AZ-104 still expects strong virtual-machine administration, including sizing, disks, availability options, movement, encryption, and scale sets. It also covers Azure Container Registry, Container Instances, Container Apps, and App Service configuration. This mix reflects the reality that administrators support both traditional server workloads and managed application platforms.
Infrastructure automation is part of that responsibility. Candidates should be able to interpret and modify ARM templates or Bicep files and use them to deploy repeatable resources. The goal is not to become a full-time infrastructure-as-code developer, but to understand declarative deployment well enough to avoid treating the portal as the only administrative interface.
Virtual networking requires understanding traffic flow rather than memorizing settings
Virtual networks, subnets, peering, public IP addresses, routes, network security groups, application security groups, Bastion, service endpoints, private endpoints, DNS, and connectivity troubleshooting form one system. A strong candidate can trace a packet mentally: name resolution, route selection, filtering, endpoint type, and destination reachability.
Azure DNS is one part of that path, while deeper network design belongs to AZ-700. For AZ-104, administrators should be able to identify whether a failure is caused by DNS, routing, NSG rules, peering, endpoint configuration, or the workload itself before changing settings at random.
Monitoring becomes useful only when signals lead to an operational response
Azure Monitor, metrics, logs, alerts, action groups, Log Analytics, Network Watcher, and Advisor help administrators detect and diagnose problems. The Azure logging and monitoring concepts are easier to retain when tied to a question: what signal would show that the service is failing, who should receive it, and what context is needed to act?
Exam scenarios may distinguish platform metrics from queryable log data or ask which tool supports a particular troubleshooting need. Hands-on practice should include creating an alert, querying logs, reviewing resource health, and using diagnostic tools during a deliberately introduced failure. Operational familiarity makes the wording of monitoring questions much less abstract.
Backup and recovery should be planned as service objectives
Administrators need to know how Azure Backup and Site Recovery fit business continuity without assuming they solve the same problem. Backup protects recoverable data and restore points, while replication and failover address workload continuity across locations. Recovery requirements should be expressed through acceptable data loss, acceptable downtime, retention, and testing.
These decisions connect to architecture because availability zones, redundancy, backup, replication, and application-level design can overlap. An AZ-104 candidate should be able to identify the administrative control needed for the stated requirement while recognizing when a broader architecture decision belongs to a solutions architect.
Cost and governance are operational concerns, not finance-only topics
Budgets, cost alerts, Advisor recommendations, tags, policy, and resource organization affect whether an Azure environment remains manageable as it grows. The subscription and management hierarchy provides the structure for applying controls consistently across teams and environments.
A useful lab is to design a small organization with management groups, subscriptions, resource groups, RBAC assignments, tags, a policy, and a budget. Then explain why each control is placed at its chosen scope. That exercise combines several AZ-104 domains and reinforces the idea that governance is about repeatable operational boundaries rather than isolated settings.
Effective AZ-104 preparation alternates configuration with troubleshooting
Reading a study guide is not enough because many objectives are procedural. Build a small environment, configure identities and storage, deploy a VM and an App Service, establish networking, enable monitoring, and deliberately break selected configurations. Troubleshooting the resulting symptoms forces candidates to understand dependencies rather than simply remember where options appear in the portal.
AZ-104 remains valuable because it teaches the operating layer that other Azure roles depend on. Architects need administrators who can implement designs, network engineers rely on correctly managed resource infrastructure, security engineers depend on sound identity and governance, and DevOps teams need stable subscriptions and services. Treat the exam as an operational systems test and the breadth becomes coherent.
Microsoft Entra and Azure authorization deserve separate mental models. Entra roles govern identity-directory functions, while Azure RBAC controls management of Azure resources. Confusing the two can lead to exam mistakes and real privilege problems. A user might be able to manage a resource group without being able to administer directory users, or manage identities without having rights to modify a virtual network. Always identify the control plane before choosing a role.
Resource locks and policy also solve different governance problems. A lock can prevent deletion or modification at a scope, while Azure Policy evaluates or enforces whether resources comply with organizational rules. Tags help with classification and cost management but are not security boundaries. Designing a lab that uses all three makes their purposes clearer than memorizing definitions because the learner can observe what each mechanism blocks, audits, or labels.
Storage security becomes easier when candidates separate authentication from authorization and network reachability. A request can fail because the caller has no credential, because the credential lacks data-plane permissions, because the storage firewall blocks the source, or because the requested object no longer exists. Shared access signatures add another dimension because scope and expiry are encoded into delegated access. Troubleshooting should determine which layer rejected the request before regenerating keys or opening networks.
For compute, administrators should practice both lifecycle operations and configuration drift. Creating a VM is only the beginning; real work includes resizing, disk changes, extension management, availability placement, backup, monitoring, and safe movement across resource groups or subscriptions. Container and App Service workloads have different lifecycle controls, so the exam rewards candidates who know when infrastructure management ends and platform management begins.
Networking labs should include effective-security-rule and effective-route inspection. These tools reveal the combined result of configuration applied at several scopes, which is often more useful than reading one NSG or route table in isolation. Add Bastion or a private endpoint and the environment becomes a realistic troubleshooting exercise where identity, DNS, network security, and service configuration all have to align.
Administrators should also build a habit of using Azure CLI or PowerShell for repeatable inspection. The exam may not ask for long scripts, but operational work benefits from commands that list resources, query configuration, or apply consistent changes across many objects. Pair those tools with Bicep for declarative deployment and the candidate gains a more realistic administrative toolkit than a portal-only study plan can provide.
Recovery drills are valuable because backup configuration can look healthy until someone needs a restore. Create a small protected workload, generate restore points, recover data or a VM, and verify access after restoration. This reveals dependencies such as network configuration, identity, DNS, and application state that may not be obvious from the backup job alone. Administrators should learn to distinguish successful backup completion from successful business recovery.
Resource movement and lifecycle questions also reward awareness of dependencies. Moving resources between groups, subscriptions, or regions may affect IDs, permissions, locks, networking, or service-specific limitations. Before changing location or ownership boundaries, inspect dependent resources and role assignments. This is a useful administrative habit because Azure environments evolve continuously; clean day-one design does not prevent later reorganizations.
A useful final exercise is to write a runbook for one Azure service from provisioning through retirement. Include identity, networking, backup, monitoring, cost controls, routine maintenance, and decommissioning. This exposes operational gaps that a one-time deployment lab misses and reinforces the administrator mindset behind AZ-104.
Use Microsoft Azure AZ-104 certification exam practice test questions, study guide and training course - the complete package at discounted price. Pass with AZ-104 Microsoft Azure Administrator practice test questions and answers, study guide, complete training course especially formatted in VCE files. Latest Microsoft certification Azure AZ-104 exam practice test questions and answers will guarantee your success without studying for endless hours.
FAQs
Microsoft Azure AZ-104 Exam Practice Test Questions, Microsoft Azure AZ-104 Practice Test Questions and Answers
Do you have questions about our AZ-104 Microsoft Azure Administrator practice test questions and answers or any of our products? If you are not clear about our Microsoft Azure AZ-104 exam practice test questions, you can read the FAQ below.
The AZ-104 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.
AZ-104 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates AZ-104 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.
What is VCE?
VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.
Can I try it for free?
Yes, you can. Look through free VCE files section and download any file you choose absolutely free.
Where do I get VCE Exam Simulator?
VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.
How are Premium VCE files different from Free VCE files?
Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.
Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.
How long will I receive updates for AZ-104 Premium VCE File that I purchased?
Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.
How can I get the products after purchase?
All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.
Will I be able to renew my products when they expire?
Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.
Please note that you will not be able to use the product after it has expired if you don't renew it.
How often are the questions updated?
We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.
What is a Study Guide?
Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.
How can I open a Study Guide?
Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.
What is a Training Course?
Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Certification/Exam.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Demo.
Still Not Convinced?
Download 11 Sample Questions that you Will see in your Microsoft AZ-104 exam.
