Pass Network Appliance NS0-165 Exam in First Attempt Easily

Latest Network Appliance NS0-165 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$8.00
Save
Verified by experts
NS0-165 Questions & Answers
Exam Code: NS0-165
Exam Name: NetApp Certified Data Administrator, ONTAP
Certification Provider: Network Appliance
NS0-165 Premium File
60 Questions & Answers
Last Update: Nov 9, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
NS0-165 Questions & Answers
Exam Code: NS0-165
Exam Name: NetApp Certified Data Administrator, ONTAP
Certification Provider: Network Appliance
NS0-165 Premium File
60 Questions & Answers
Last Update: Nov 9, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$87.99
$79.99

NetApp Certified Data Administrator, ONTAP NS0-165 Practice Test 36

Question 350

The operational control is: Configure the supported NFS Kerberos security flavor and the required KDC, DNS and keytab prerequisites. Which observation would be the STRONGEST acceptance evidence?

  1. Matched Windows and Unix principals can access the same approved files without unexpectedly broad rights.
  2. A permitted client mounts successfully while a test host outside the approved subnet is denied.
  3. File ownership and read/write permissions are consistent for the same approved users on both clients.
  4. A supported client mounts with the required Kerberos mode and access fails when valid credentials are removed.

Explanation

Correct Answer

D:

The decisive acceptance result is: A supported client mounts with the required Kerberos mode and access fails when valid credentials are removed. That specifically verifies the action: Configure the supported NFS Kerberos security flavor and the required KDC, DNS and keytab prerequisites. The problem was: An NFS export needs Kerberos authentication but an administrator assumes enabling any NFSv3 rule provides encrypted, authenticated user identities. The engineering principle is: Kerberos-based NFS authorization depends on coordinated service principals and supported security flavors. Without the control, A client using the wrong security flavor may be denied or fall back to weaker access than the policy requires.

Incorrect Answers

A:

Matched Windows and Unix principals can access the same approved files without unexpectedly broad rights. This would support designing supported multiprotocol name mappings and a consistent security-style strategy before enabling both protocols, but it does not validate the control at issue. The required evidence is A supported client mounts with the required Kerberos mode and access fails when valid credentials are removed.

B:

A permitted client mounts successfully while a test host outside the approved subnet is denied. This would support creating a scoped ONTAP export policy rule allowing the required protocol and client network only, but it does not validate the control at issue. The required evidence is A supported client mounts with the required Kerberos mode and access fails when valid credentials are removed.

C:

File ownership and read/write permissions are consistent for the same approved users on both clients. This would support aligning the supported NFSv4 ID domain, directory identity mapping and SVM NFS configuration, but it does not validate the control at issue. The required evidence is A supported client mounts with the required Kerberos mode and access fails when valid credentials are removed.

Question 351

An ONTAP administrator faces this situation: A team needs a short-lived test copy of a live database dataset but cannot afford to duplicate the entire dataset immediately. Which response BEST addresses the requirement?

  1. Evaluate a supported FlexCache relationship and coherency behavior for the workload and write requirements.
  2. Configure qtree and quota policy rules at the appropriate SVM or volume scope for the usage boundary.
  3. Pair appropriate local ONTAP snapshots with off-system replication or backup according to the recovery objectives.
  4. Evaluate a supported FlexClone volume or file clone workflow with snapshot lineage and lifecycle controls.

Explanation

Correct Answer

D:

The best response is: Evaluate a supported FlexClone volume or file clone workflow with snapshot lineage and lifecycle controls. The requirement is: A team needs a short-lived test copy of a live database dataset but cannot afford to duplicate the entire dataset immediately. The reason is: FlexClone can share unchanged storage blocks with its parent while providing a writable test view when supported. Without the measure, A full physical copy may waste capacity and extend refresh time when testing only a few changed blocks. A direct check is: A clone receives test writes independently while parent data remains unchanged and physical usage tracks changed blocks.

Incorrect Answers

A:

Evaluate a supported FlexCache relationship and coherency behavior for the workload and write requirements. This investigates a different technical cause. FlexClone can share unchanged storage blocks with its parent while providing a writable test view when supported. The focused response to this case is evaluate a supported FlexClone volume or file clone workflow with snapshot lineage and lifecycle controls.

B:

Configure qtree and quota policy rules at the appropriate SVM or volume scope for the usage boundary. This investigates a different technical cause. FlexClone can share unchanged storage blocks with its parent while providing a writable test view when supported. The focused response to this case is evaluate a supported FlexClone volume or file clone workflow with snapshot lineage and lifecycle controls.

C:

Pair appropriate local ONTAP snapshots with off-system replication or backup according to the recovery objectives. This investigates a different technical cause. FlexClone can share unchanged storage blocks with its parent while providing a writable test view when supported. The focused response to this case is evaluate a supported FlexClone volume or file clone workflow with snapshot lineage and lifecycle controls.

Question 352

The following storage control is missing: Use supported NFS Kerberos security flavors and export restrictions suited to the approved trust model. The operational context is: A regulated NFSv4 environment needs authenticated and protected client access but an administrator enables a permissive AUTH_SYS export for every host. Which consequence is MOST likely?

  1. A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts.
  2. Using an obsolete matrix can leave a supported and critical file workload without behavioral ransomware monitoring.
  3. Shared plaintext keys can let an unauthorized person impersonate the automation account and alter storage settings.
  4. Data on removed media can remain readable when only traffic encryption has been configured.

Explanation

Correct Answer

A:

The most direct exposure is: A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts. The original situation is: A regulated NFSv4 environment needs authenticated and protected client access but an administrator enables a permissive AUTH_SYS export for every host. The omitted control is: Use supported NFS Kerberos security flavors and export restrictions suited to the approved trust model. The technical rationale is: NFS authorization strength depends on the selected security flavor and validated client identities. The correct remediation can be verified by: A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export.

Incorrect Answers

B:

Using an obsolete matrix can leave a supported and critical file workload without behavioral ransomware monitoring. That exposure would be addressed by confirm current ONTAP 9.18.1 ARP/AI FlexGroup support and enable the appropriate supported policy. The actual failure instead creates the following risk: A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts.

C:

Shared plaintext keys can let an unauthorized person impersonate the automation account and alter storage settings. That exposure would be addressed by move secrets to approved protected management, rotate exposed credentials and limit script access. The actual failure instead creates the following risk: A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts.

D:

Data on removed media can remain readable when only traffic encryption has been configured. That exposure would be addressed by enable supported NetApp Volume Encryption or hardware self-encrypting drive features with an approved key strategy. The actual failure instead creates the following risk: A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts.

Question 353

A storage team has implemented: Verify cluster and node management LIF health, routing, permitted services and event logs before modifying storage workloads. Which result MOST convincingly verifies effectiveness?

  1. A test management change appears with identity, action and result in the approved audit log destination.
  2. An approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available.
  3. A reconciled report matches current ONTAP values and identifies the cluster, timestamp and collection status for every row.
  4. A second automation run makes no unintended modifications and produces matching audited configuration results on each target.

Explanation

Correct Answer

B:

The decisive acceptance result is: An approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available. That specifically verifies the action: Verify cluster and node management LIF health, routing, permitted services and event logs before modifying storage workloads. The problem was: An administrator sees an intermittent node-management login failure and starts restarting data SVMs without examining the administrative interface. The engineering principle is: The ONTAP cluster management endpoint is distinct from data-serving SVM interfaces and follows its own access controls. Without the control, restarting healthy data services can introduce an outage while the actual management route remains broken.

Incorrect Answers

A:

A test management change appears with identity, action and result in the approved audit log destination. This would support enabling and review supported administrative audit logging with retained access-controlled records, but it does not validate the control at issue. The required evidence is an approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available.

C:

A reconciled report matches current ONTAP values and identifies the cluster, timestamp and collection status for every row. This would support building a read-only inventory process using supported ONTAP System Manager or API data and validate collection timestamps, but it does not validate the control at issue. The required evidence is an approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available.

D:

A second automation run makes no unintended modifications and produces matching audited configuration results on each target. This would support using a supported ONTAP REST API or automation workflow with scoped credentials, validation and idempotent changes, but it does not validate the control at issue. The required evidence is an approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available.

Question 354

A NetApp storage team observes: Two application sites each hold a data copy but the business has not specified whether minutes of data loss are acceptable during disaster recovery. What action should be taken FIRST?

  1. Establish measurable RPO and RTO and select asynchronous, synchronous or backup protection accordingly.
  2. Create and protect a supported ONTAP consistency group aligned to the application's dependent volumes.
  3. Evaluate SnapMirror active sync with suitable SAN host multipathing, peer cluster and Mediator prerequisites.
  4. Validate supported SAN multipathing and host availability alongside the SnapMirror active sync consistency-group configuration.

Explanation

Correct Answer

A:

The best response is: Establish measurable RPO and RTO and select asynchronous, synchronous or backup protection accordingly. The requirement is: Two application sites each hold a data copy but the business has not specified whether minutes of data loss are acceptable during disaster recovery. The reason is: Replication method must follow business loss tolerance and recovery-time needs instead of relying on feature names. Without the measure, an asynchronous design may lose unacceptable recent transactions if the business actually requires zero RPO. A direct check is: A documented recovery test records data loss and service restoration time against signed RPO and RTO targets.

Incorrect Answers

B:

Create and protect a supported ONTAP consistency group aligned to the application's dependent volumes. This investigates a different technical cause. Replication method must follow business loss tolerance and recovery-time needs instead of relying on feature names. The focused response to this case is establish measurable RPO and RTO and select asynchronous, synchronous or backup protection accordingly.

C:

Evaluate SnapMirror active sync with suitable SAN host multipathing, peer cluster and Mediator prerequisites. This investigates a different technical cause. Replication method must follow business loss tolerance and recovery-time needs instead of relying on feature names. The focused response to this case is establish measurable RPO and RTO and select asynchronous, synchronous or backup protection accordingly.

D:

Validate supported SAN multipathing and host availability alongside the SnapMirror active sync consistency-group configuration. This investigates a different technical cause. Replication method must follow business loss tolerance and recovery-time needs instead of relying on feature names. The focused response to this case is establish measurable RPO and RTO and select asynchronous, synchronous or backup protection accordingly.

Question 355

A proposed solution is: Create and protect a supported ONTAP consistency group aligned to the application's dependent volumes. The underlying condition is: A financial application spans several ONTAP volumes and operators take independent snapshots at different times. Which technical reason BEST supports the solution?

  1. A third-party witness helps distinguish site loss from a network partition and informs safe automated failover.
  2. Safe switchback requires synchronized mirrored storage and healthy intersite links after a switchover.
  3. A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies.
  4. Synchronous storage copies alone do not ensure transparent application continuity if hosts cannot follow the surviving paths.

Explanation

Correct Answer

C:

The controlling reason is: A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies. It supports the proposed action: Create and protect a supported ONTAP consistency group aligned to the application's dependent volumes. The situation is: A financial application spans several ONTAP volumes and operators take independent snapshots at different times. If this issue is ignored, restoring separately timed volume snapshots may leave application data and logs from inconsistent transaction periods. The relevant operational proof is: A controlled application recovery uses one consistency-group snapshot and passes multi-volume consistency checks.

Incorrect Answers

A:

A third-party witness helps distinguish site loss from a network partition and informs safe automated failover. That fact does not settle the requirement being tested: A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies. Here the relevant control is A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies.

B:

Safe switchback requires synchronized mirrored storage and healthy intersite links after a switchover. That fact does not settle the requirement being tested: A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies. Here the relevant control is A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies.

D:

Synchronous storage copies alone do not ensure transparent application continuity if hosts cannot follow the surviving paths. That fact does not settle the requirement being tested: A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies. Here the relevant control is A consistency group coordinates point-in-time state across multiple volumes that share application write dependencies.

Question 356

The team does not implement this safeguard: Correlate aggregate physical space, volume settings and host error timestamps before treating the issue as a fabric outage. The observed situation is: A SAN volume has free space but the host sees sporadic SCSI write failures and an ONTAP event reports its backing aggregate nearly full. Which risk remains MOST direct?

  1. Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures.
  2. A properly connected host can still see no disk when its identifier is missing from the correct igroup.
  3. An outdated or unsupported host multipath stack may incorrectly fail all paths during an otherwise healthy takeover.
  4. Uncoordinated hosts can corrupt a filesystem when both mount the same block LUN with no clustered filesystem support.

Explanation

Correct Answer

A:

The most direct exposure is: Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures. The original situation is: A SAN volume has free space but the host sees sporadic SCSI write failures and an ONTAP event reports its backing aggregate nearly full. The omitted control is: Correlate aggregate physical space, volume settings and host error timestamps before treating the issue as a fabric outage. The technical rationale is: Logical SAN capacity can become unavailable when physical backing blocks are exhausted despite healthy FC or iSCSI paths. The correct remediation can be verified by: After approved capacity remediation, physical free space rises and the host completes sustained test writes without error.

Incorrect Answers

B:

A properly connected host can still see no disk when its identifier is missing from the correct igroup. That exposure would be addressed by verify the host initiator identifiers, igroup membership, LUN mapping and storage rescan before changing networking. The actual failure instead creates the following risk: Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures.

C:

An outdated or unsupported host multipath stack may incorrectly fail all paths during an otherwise healthy takeover. That exposure would be addressed by trace host HBA drivers, supported multipath settings and target path transitions during the failover timeline. The actual failure instead creates the following risk: Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures.

D:

Uncoordinated hosts can corrupt a filesystem when both mount the same block LUN with no clustered filesystem support. That exposure would be addressed by audit ONTAP igroups and SAN zoning to remove the unintended initiator access before mounting the device. The actual failure instead creates the following risk: Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures.

Question 357

The team plans the measure: Review application-consistent protection requirements and use a coordinated consistency-group recovery point. It addresses: A disaster recovery snapshot exists but a restored application reports inconsistent transaction log sequence across multiple volumes. Which storage principle BEST explains the choice?

  1. A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency.
  2. Per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy.
  3. Healthy replication state does not prove that a destination can be activated with usable application dependencies.
  4. Remote replication requires free backing capacity to accept changed blocks and retained recovery points.

Explanation

Correct Answer

B:

The controlling reason is: Per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy. It supports the proposed action: Review application-consistent protection requirements and use a coordinated consistency-group recovery point. The situation is: A disaster recovery snapshot exists but a restored application reports inconsistent transaction log sequence across multiple volumes. If this issue is ignored, repeated independent restores may never yield a coherent application transaction state. The relevant operational proof is: A test restore from the approved consistency-group point passes application log and data integrity checks.

Incorrect Answers

A:

A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. That fact does not settle the requirement being tested: Per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy. Here the relevant control is per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy.

C:

Healthy replication state does not prove that a destination can be activated with usable application dependencies. That fact does not settle the requirement being tested: Per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy. Here the relevant control is per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy.

D:

Remote replication requires free backing capacity to accept changed blocks and retained recovery points. That fact does not settle the requirement being tested: Per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy. Here the relevant control is per-volume snapshot timing can leave cross-volume application state inconsistent even when each volume is individually healthy.

Question 358

The storage infrastructure team must resolve this issue: An application owner schedules daily ONTAP snapshots but has never tested whether snapshots capture an appropriate recoverable point for a busy database. Which solution is the BEST fit?

  1. Periodically test a controlled destination recovery and application validation according to the documented RTO.
  2. Reconcile snapshot schedules, SnapMirror retention rules and destination capacity before extending the policy.
  3. Configure supported asynchronous SnapMirror replication and monitor transfer schedules and lag against the RPO.
  4. Select an application-aware snapshot policy and validate recovery consistency with the database team.

Explanation

Correct Answer

D:

The best response is: Select an application-aware snapshot policy and validate recovery consistency with the database team. The requirement is: An application owner schedules daily ONTAP snapshots but has never tested whether snapshots capture an appropriate recoverable point for a busy database. The reason is: A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. Without the measure, an untested snapshot may contain data that need lengthy database recovery or fail application integrity checks. A direct check is: A planned restore validates database consistency and meets the defined data-recovery objectives.

Incorrect Answers

A:

Periodically test a controlled destination recovery and application validation according to the documented RTO. This investigates a different technical cause. A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. The focused response to this case is select an application-aware snapshot policy and validate recovery consistency with the database team.

B:

Reconcile snapshot schedules, SnapMirror retention rules and destination capacity before extending the policy. This investigates a different technical cause. A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. The focused response to this case is select an application-aware snapshot policy and validate recovery consistency with the database team.

C:

Configure supported asynchronous SnapMirror replication and monitor transfer schedules and lag against the RPO. This investigates a different technical cause. A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. The focused response to this case is select an application-aware snapshot policy and validate recovery consistency with the database team.

Question 359

The storage infrastructure team must resolve this issue: An ONTAP data LIF is created on an untagged port even though application traffic must traverse a dedicated storage VLAN. Which solution is the BEST fit?

  1. Create and assign the appropriate VLAN interface, broadcast domain and subnet before placing the data LIF.
  2. Configure the appropriate SVM route and gateway after confirming broadcast domain and service policy.
  3. Select an ONTAP LIF service policy limited to the intended data protocols and required supporting services.
  4. Design a supported ONTAP interface group and switch-side aggregation mode with realistic hashing and failover expectations.

Explanation

Correct Answer

A:

The best response is: Create and assign the appropriate VLAN interface, broadcast domain and subnet before placing the data LIF. The requirement is: An ONTAP data LIF is created on an untagged port even though application traffic must traverse a dedicated storage VLAN. The reason is: VLAN interfaces maintain the required tagged Layer 2 boundary between switch and storage network ports. Without the measure, A LIF on the wrong network interface may be unreachable or expose traffic outside the approved segment. A direct check is: A network capture and client connection check show the storage traffic on the intended VLAN only.

Incorrect Answers

B:

Configure the appropriate SVM route and gateway after confirming broadcast domain and service policy. This investigates a different technical cause. VLAN interfaces maintain the required tagged Layer 2 boundary between switch and storage network ports. The focused response to this case is create and assign the appropriate VLAN interface, broadcast domain and subnet before placing the data LIF.

C:

Select an ONTAP LIF service policy limited to the intended data protocols and required supporting services. This investigates a different technical cause. VLAN interfaces maintain the required tagged Layer 2 boundary between switch and storage network ports. The focused response to this case is create and assign the appropriate VLAN interface, broadcast domain and subnet before placing the data LIF.

D:

Design a supported ONTAP interface group and switch-side aggregation mode with realistic hashing and failover expectations. This investigates a different technical cause. VLAN interfaces maintain the required tagged Layer 2 boundary between switch and storage network ports. The focused response to this case is create and assign the appropriate VLAN interface, broadcast domain and subnet before placing the data LIF.

Question 360

A NetApp storage team observes: An ONTAP cluster uses thin volumes and clones but a capacity report sums each logical file copy as if all underlying blocks were physically unique. What action should be taken FIRST?

  1. Measure workload-specific deduplication and compression savings instead of promising a universal reduction factor.
  2. Review snapshot policy, retention locks and replication dependencies before deleting protected recovery points.
  3. Reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting.
  4. Model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets.

Explanation

Correct Answer

C:

The best response is: Reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting. The requirement is: An ONTAP cluster uses thin volumes and clones but a capacity report sums each logical file copy as if all underlying blocks were physically unique. The reason is: Physical capacity consumption differs from apparent logical size when cloning, snapshots and reduction share blocks. Without the measure, misreading logical usage can cause unnecessary purchases or hide real physical pressure from recent unique writes. A direct check is: A report explains the physical delta after clone modifications and matches aggregate-level utilization.

Incorrect Answers

A:

Measure workload-specific deduplication and compression savings instead of promising a universal reduction factor. This investigates a different technical cause. Physical capacity consumption differs from apparent logical size when cloning, snapshots and reduction share blocks. The focused response to this case is reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting.

B:

Review snapshot policy, retention locks and replication dependencies before deleting protected recovery points. This investigates a different technical cause. Physical capacity consumption differs from apparent logical size when cloning, snapshots and reduction share blocks. The focused response to this case is reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting.

D:

Model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets. This investigates a different technical cause. Physical capacity consumption differs from apparent logical size when cloning, snapshots and reduction share blocks. The focused response to this case is reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests

accept downloads in the last 7 days
What exactly is NS0-165 Premium File?

The NS0-165 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

NS0-165 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates NS0-165 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for NS0-165 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.