Pass Network Appliance NS0-165 Exam in First Attempt Easily

Latest Network Appliance NS0-165 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$8.00
Save
Verified by experts
NS0-165 Questions & Answers
Exam Code: NS0-165
Exam Name: NetApp Certified Data Administrator, ONTAP
Certification Provider: Network Appliance
NS0-165 Premium File
60 Questions & Answers
Last Update: Nov 9, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
NS0-165 Questions & Answers
Exam Code: NS0-165
Exam Name: NetApp Certified Data Administrator, ONTAP
Certification Provider: Network Appliance
NS0-165 Premium File
60 Questions & Answers
Last Update: Nov 9, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$87.99
$79.99

NetApp Certified Data Administrator, ONTAP NS0-165 Practice Test 30

Question 290

For this ONTAP problem: A low-bandwidth WAN carries an initial SnapMirror replication of many terabytes and the team assumes daily updates can complete without measuring change rates. The team applies: Size the transfer window, link capacity and supported throttling for baseline and incremental SnapMirror traffic. Which test BEST demonstrates success?

  1. A planned restore validates database consistency and meets the defined data-recovery objectives.
  2. A policy review and remote inventory show the intended daily and monthly labeled snapshots retained through schedule updates.
  3. A simulated source failure allows recovery from the expected destination snapshot with measured data age.
  4. Transfer metrics show each scheduled update completes before the next interval with measured peak data growth.

Explanation

Correct Answer

D:

The decisive acceptance result is: Transfer metrics show each scheduled update completes before the next interval with measured peak data growth. That specifically verifies the action: Size the transfer window, link capacity and supported throttling for baseline and incremental SnapMirror traffic. The problem was: A low-bandwidth WAN carries an initial SnapMirror replication of many terabytes and the team assumes daily updates can complete without measuring change rates. The engineering principle is: Replication schedules depend on data-change rate and available network bandwidth rather than policy labels alone. Without the control, the destination may lag progressively behind the RPO if transfer demand exceeds the network budget.

Incorrect Answers

A:

A planned restore validates database consistency and meets the defined data-recovery objectives. This would support selecting an application-aware snapshot policy and validate recovery consistency with the database team, but it does not validate the control at issue. The required evidence is transfer metrics show each scheduled update completes before the next interval with measured peak data growth.

B:

A policy review and remote inventory show the intended daily and monthly labeled snapshots retained through schedule updates. This would support defining matching source snapshot labels and vault or mirror-vault SnapMirror policy rules for required retention, but it does not validate the control at issue. The required evidence is transfer metrics show each scheduled update completes before the next interval with measured peak data growth.

C:

A simulated source failure allows recovery from the expected destination snapshot with measured data age. This would support configuring supported asynchronous SnapMirror replication and monitor transfer schedules and lag against the RPO, but it does not validate the control at issue. The required evidence is transfer metrics show each scheduled update completes before the next interval with measured peak data growth.

Question 291

The operational control is: Use supported NFS Kerberos security flavors and export restrictions suited to the approved trust model. Which observation would be the STRONGEST acceptance evidence?

  1. A platform audit shows the target volume or drives encrypted and the key recovery procedure passes a controlled test.
  2. An authorized service inventory matches the approved baseline and disabled management ports cannot be reached.
  3. ONTAP reports ARP/AI active on the supported volume and a controlled evaluation produces expected security observations.
  4. A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export.

Explanation

Correct Answer

D:

The decisive acceptance result is: A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export. That specifically verifies the action: Use supported NFS Kerberos security flavors and export restrictions suited to the approved trust model. The problem was: A regulated NFSv4 environment needs authenticated and protected client access but an administrator enables a permissive AUTH_SYS export for every host. The engineering principle is: NFS authorization strength depends on the selected security flavor and validated client identities. Without the control, A weak authentication policy can expose shared data to spoofed host identities and unauthorized mounts.

Incorrect Answers

A:

A platform audit shows the target volume or drives encrypted and the key recovery procedure passes a controlled test. This would support enabling supported NetApp Volume Encryption or hardware self-encrypting drive features with an approved key strategy, but it does not validate the control at issue. The required evidence is A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export.

B:

An authorized service inventory matches the approved baseline and disabled management ports cannot be reached. This would support hardening the cluster and SVM management attack surface by disabling unneeded services and reviewing allowed protocols, but it does not validate the control at issue. The required evidence is A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export.

C:

ONTAP reports ARP/AI active on the supported volume and a controlled evaluation produces expected security observations. This would support using the supported ONTAP 9.18.1 ARP/AI workflow and validate immediate active detection status on eligible volumes, but it does not validate the control at issue. The required evidence is A Kerberos-authenticated test client mounts successfully while an untrusted machine cannot read the export.

Question 292

An ONTAP maintenance plan omits: Review ONTAP SMB protocol dialect, signing and encryption settings against approved client compatibility. In the following setting: An SMB storage service accepts connections from legacy clients but security policy requires supported modern negotiation and signing. What is the most specific exposure?

  1. Plaintext or unvalidated connections may expose credentials and object data to interception.
  2. Permitting weak or unsigned sessions can expose file operations to interception or downgrade attacks.
  3. One compromised privileged account may remove recovery points needed after a destructive incident.
  4. Unnecessary enabled services can be abused even when applications never use them.

Explanation

Correct Answer

B:

The most direct exposure is: Permitting weak or unsigned sessions can expose file operations to interception or downgrade attacks. The original situation is: An SMB storage service accepts connections from legacy clients but security policy requires supported modern negotiation and signing. The omitted control is: Review ONTAP SMB protocol dialect, signing and encryption settings against approved client compatibility. The technical rationale is: SMB transport security must be enforced jointly with supported client capabilities and directory authentication. The correct remediation can be verified by: An approved modern client negotiates required security while a deliberately unsupported weak client is denied.

Incorrect Answers

A:

Plaintext or unvalidated connections may expose credentials and object data to interception. That exposure would be addressed by require supported TLS and approved certificate validation for the S3 endpoint and restrict key permissions. The actual failure instead creates the following risk: Permitting weak or unsigned sessions can expose file operations to interception or downgrade attacks.

C:

One compromised privileged account may remove recovery points needed after a destructive incident. That exposure would be addressed by apply supported multi-admin verification and protected retention controls for high-risk administrative operations. The actual failure instead creates the following risk: Permitting weak or unsigned sessions can expose file operations to interception or downgrade attacks.

D:

Unnecessary enabled services can be abused even when applications never use them. That exposure would be addressed by harden the cluster and SVM management attack surface by disabling unneeded services and reviewing allowed protocols. The actual failure instead creates the following risk: Permitting weak or unsigned sessions can expose file operations to interception or downgrade attacks.

Question 293

An engineer addresses this case: A newly mapped FC LUN appears on two independent hosts that should never share ownership of the same filesystem. The chosen action is: Audit ONTAP igroups and SAN zoning to remove the unintended initiator access before mounting the device. Which verification is MOST appropriate?

  1. Host discovery tests show the LUN only on authorized initiators and deny the unintended system.
  2. An authorized iSCSI session establishes with the new approved secret and authentication-failure logs stop growing.
  3. After approved capacity remediation, physical free space rises and the host completes sustained test writes without error.
  4. Corrected zoning restores the expected path count without modifying the application LUN content.

Explanation

Correct Answer

A:

The decisive acceptance result is: Host discovery tests show the LUN only on authorized initiators and deny the unintended system. That specifically verifies the action: Audit ONTAP igroups and SAN zoning to remove the unintended initiator access before mounting the device. The problem was: A newly mapped FC LUN appears on two independent hosts that should never share ownership of the same filesystem. The engineering principle is: LUN masking and fabric zoning must jointly enforce host isolation to avoid simultaneous unsafe block writes. Without the control, uncoordinated hosts can corrupt a filesystem when both mount the same block LUN with no clustered filesystem support.

Incorrect Answers

B:

An authorized iSCSI session establishes with the new approved secret and authentication-failure logs stop growing. This would support reconciling initiator and ONTAP CHAP authentication settings and retest supported session negotiation, but it does not validate the control at issue. The required evidence is host discovery tests show the LUN only on authorized initiators and deny the unintended system.

C:

After approved capacity remediation, physical free space rises and the host completes sustained test writes without error. This would support correlating aggregate physical space, volume settings and host error timestamps before treating the issue as a fabric outage, but it does not validate the control at issue. The required evidence is host discovery tests show the LUN only on authorized initiators and deny the unintended system.

D:

Corrected zoning restores the expected path count without modifying the application LUN content. This would support comparing switch zoning, WWPN login state and host multipath details before recreating LUNs, but it does not validate the control at issue. The required evidence is host discovery tests show the LUN only on authorized initiators and deny the unintended system.

Question 294

The operational control is: Enable and review supported administrative audit logging with retained access-controlled records. Which observation would be the STRONGEST acceptance evidence?

  1. A second automation run makes no unintended modifications and produces matching audited configuration results on each target.
  2. A test management change appears with identity, action and result in the approved audit log destination.
  3. A supported AutoSupport test transmission is confirmed delivered through the approved proxy with no sensitive policy violation.
  4. An approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available.

Explanation

Correct Answer

B:

The decisive acceptance result is: A test management change appears with identity, action and result in the approved audit log destination. That specifically verifies the action: Enable and review supported administrative audit logging with retained access-controlled records. The problem was: An engineer changes storage network configuration in ONTAP and there is no trace of the initiating identity or successful command. The engineering principle is: Administrative change accountability requires authenticated actor information and retained management events. Without the control, an unauthorized configuration change can go undetected or be wrongly attributed during an outage investigation.

Incorrect Answers

A:

A second automation run makes no unintended modifications and produces matching audited configuration results on each target. This would support using a supported ONTAP REST API or automation workflow with scoped credentials, validation and idempotent changes, but it does not validate the control at issue. The required evidence is A test management change appears with identity, action and result in the approved audit log destination.

C:

A supported AutoSupport test transmission is confirmed delivered through the approved proxy with no sensitive policy violation. This would support verifying AutoSupport delivery settings, proxy reachability and any approved telemetry destinations before suppressing alerts, but it does not validate the control at issue. The required evidence is A test management change appears with identity, action and result in the approved audit log destination.

D:

An approved management client reconnects over the correct management LIF while NFS and SAN I/O stays available. This would support verifying cluster and node management LIF health, routing, permitted services and event logs before modifying storage workloads, but it does not validate the control at issue. The required evidence is A test management change appears with identity, action and result in the approved audit log destination.

Question 295

The storage infrastructure team must resolve this issue: An administrator copies an on-premises SAN design to a cloud file service and assumes Fibre Channel ports exist in the selected managed region. Which solution is the BEST fit?

  1. Compare Cloud Volumes ONTAP deployment requirements with provider-managed file offerings and select according to operating responsibilities.
  2. Investigate the takeover and giveback veto conditions and restore partner readiness before considering a force operation.
  3. Validate the exact cloud service's supported protocols and regional availability before choosing host access paths.
  4. Compare AFF A-Series performance characteristics, supported protocols and measured latency before selecting the platform.

Explanation

Correct Answer

C:

The best response is: Validate the exact cloud service's supported protocols and regional availability before choosing host access paths. The requirement is: An administrator copies an on-premises SAN design to a cloud file service and assumes Fibre Channel ports exist in the selected managed region. The reason is: ONTAP-related cloud services differ in supported SAN and NAS connectivity despite similar management terminology. Without the measure, unverified Fibre Channel assumptions can strand hosts with an inaccessible target after cloud migration. A direct check is: The approved service matrix shows the required protocol in the intended region and an eligible host completes a mount or login.

Incorrect Answers

A:

Compare Cloud Volumes ONTAP deployment requirements with provider-managed file offerings and select according to operating responsibilities. This investigates a different technical cause. ONTAP-related cloud services differ in supported SAN and NAS connectivity despite similar management terminology. The focused response to this case is validate the exact cloud service's supported protocols and regional availability before choosing host access paths.

B:

Investigate the takeover and giveback veto conditions and restore partner readiness before considering a force operation. This investigates a different technical cause. ONTAP-related cloud services differ in supported SAN and NAS connectivity despite similar management terminology. The focused response to this case is validate the exact cloud service's supported protocols and regional availability before choosing host access paths.

D:

Compare AFF A-Series performance characteristics, supported protocols and measured latency before selecting the platform. This investigates a different technical cause. ONTAP-related cloud services differ in supported SAN and NAS connectivity despite similar management terminology. The focused response to this case is validate the exact cloud service's supported protocols and regional availability before choosing host access paths.

Question 296

The team does not implement this safeguard: Audit the LIF failover group, policy and broadcast-domain memberships before attempting forced migration. The observed situation is: An ONTAP client LIF shows no valid failover targets after its physical port is moved to a different broadcast domain. Which risk remains MOST direct?

  1. A missing route or DNS response can prevent domain authentication even while the data LIF responds to ping.
  2. Changing NFS tuning without correcting link errors leaves data transfers unstable and difficult to diagnose.
  3. An incorrectly configured member can blackhole part of client traffic even when the group remains nominally up.
  4. Failover can be disabled in practice when the target-port list becomes empty after topology edits.

Explanation

Correct Answer

D:

The most direct exposure is: Failover can be disabled in practice when the target-port list becomes empty after topology edits. The original situation is: An ONTAP client LIF shows no valid failover targets after its physical port is moved to a different broadcast domain. The omitted control is: Audit the LIF failover group, policy and broadcast-domain memberships before attempting forced migration. The technical rationale is: LIF failover target eligibility follows the associated network reachability and configured policies. The correct remediation can be verified by: A LIF show or equivalent report lists healthy compatible targets and a planned port outage preserves connectivity.

Incorrect Answers

A:

A missing route or DNS response can prevent domain authentication even while the data LIF responds to ping. That exposure would be addressed by verify SVM DNS server settings, route reachability and name-resolution results from the affected context. The actual failure instead creates the following risk: Failover can be disabled in practice when the target-port list becomes empty after topology edits.

B:

Changing NFS tuning without correcting link errors leaves data transfers unstable and difficult to diagnose. That exposure would be addressed by inspect port counters, transceiver and cabling health plus switch negotiation before tuning the NFS server. The actual failure instead creates the following risk: Failover can be disabled in practice when the target-port list becomes empty after topology edits.

C:

An incorrectly configured member can blackhole part of client traffic even when the group remains nominally up. That exposure would be addressed by compare the ONTAP interface-group mode and the switch aggregation configuration on every member. The actual failure instead creates the following risk: Failover can be disabled in practice when the target-port list becomes empty after topology edits.

Question 297

An engineer addresses this case: An application owner schedules daily ONTAP snapshots but has never tested whether snapshots capture an appropriate recoverable point for a busy database. The chosen action is: Select an application-aware snapshot policy and validate recovery consistency with the database team. Which verification is MOST appropriate?

  1. A recovery test records activation steps and successful application reads within the agreed RTO.
  2. A planned restore validates database consistency and meets the defined data-recovery objectives.
  3. Transfer metrics show each scheduled update completes before the next interval with measured peak data growth.
  4. A single-directory restore returns the required content while recently changed unrelated files remain intact.

Explanation

Correct Answer

B:

The decisive acceptance result is: A planned restore validates database consistency and meets the defined data-recovery objectives. That specifically verifies the action: Select an application-aware snapshot policy and validate recovery consistency with the database team. The problem was: An application owner schedules daily ONTAP snapshots but has never tested whether snapshots capture an appropriate recoverable point for a busy database. The engineering principle is: A snapshot captures a point-in-time storage view but application recovery may require coordinated write consistency. Without the control, an untested snapshot may contain data that need lengthy database recovery or fail application integrity checks.

Incorrect Answers

A:

A recovery test records activation steps and successful application reads within the agreed RTO. This would support periodicallying test a controlled destination recovery and application validation according to the documented RTO, but it does not validate the control at issue. The required evidence is A planned restore validates database consistency and meets the defined data-recovery objectives.

C:

Transfer metrics show each scheduled update completes before the next interval with measured peak data growth. This would support sizing the transfer window, link capacity and supported throttling for baseline and incremental SnapMirror traffic, but it does not validate the control at issue. The required evidence is A planned restore validates database consistency and meets the defined data-recovery objectives.

D:

A single-directory restore returns the required content while recently changed unrelated files remain intact. This would support choosing a supported selective file or directory restore method from an appropriate snapshot or backup copy, but it does not validate the control at issue. The required evidence is A planned restore validates database consistency and meets the defined data-recovery objectives.

Question 298

A NetApp storage team observes: An enterprise expects a clone-heavy analytics environment to preserve space savings indefinitely even when every clone diverges during tests. What action should be taken FIRST?

  1. Model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets.
  2. Test supported inline compression with representative data and read/write performance measurements.
  3. Reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting.
  4. Select a supported inline or background deduplication strategy after measuring workload headroom and savings.

Explanation

Correct Answer

A:

The best response is: Model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets. The requirement is: An enterprise expects a clone-heavy analytics environment to preserve space savings indefinitely even when every clone diverges during tests. The reason is: Copy-on-write sharing saves capacity initially but divergent data consumes new physical blocks over time. Without the measure, uncontrolled test writes can exhaust the backing aggregate even though each clone was initially inexpensive. A direct check is: A controlled clone workload shows measured changed-block growth and automatic or approved cleanup restores capacity.

Incorrect Answers

B:

Test supported inline compression with representative data and read/write performance measurements. This investigates a different technical cause. Copy-on-write sharing saves capacity initially but divergent data consumes new physical blocks over time. The focused response to this case is model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets.

C:

Reconcile logical provisioned size, physical used space, shared blocks and snapshot overhead in capacity reporting. This investigates a different technical cause. Copy-on-write sharing saves capacity initially but divergent data consumes new physical blocks over time. The focused response to this case is model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets.

D:

Select a supported inline or background deduplication strategy after measuring workload headroom and savings. This investigates a different technical cause. Copy-on-write sharing saves capacity initially but divergent data consumes new physical blocks over time. The focused response to this case is model changed-block growth across FlexClone snapshots and enforce cleanup or expiration policies for temporary test datasets.

Question 299

An ONTAP maintenance plan omits: Inspect the volume junction path, relevant export policy rules and client identity before opening firewall ports. In the following setting: An NFS client can ping a data LIF but receives access denied when mounting a newly created export path. What is the most specific exposure?

  1. An S3 client cannot create or retrieve objects from an SVM merely because file protocols already work.
  2. The application host sees no eligible disk or an unintended initiator gains access if mappings are overly broad.
  3. Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures.
  4. Changing network ACLs cannot fix a missing export authorization and may introduce excessive access.

Explanation

Correct Answer

D:

The most direct exposure is: Changing network ACLs cannot fix a missing export authorization and may introduce excessive access. The original situation is: An NFS client can ping a data LIF but receives access denied when mounting a newly created export path. The omitted control is: Inspect the volume junction path, relevant export policy rules and client identity before opening firewall ports. The technical rationale is: NFS reachability and authorization are separate checks involving namespace and export rules. The correct remediation can be verified by: The authorized client mounts the correct junction while an unapproved address remains denied.

Incorrect Answers

A:

An S3 client cannot create or retrieve objects from an SVM merely because file protocols already work. That exposure would be addressed by configure the supported ONTAP S3 server, bucket and client access policies before testing object operations. The actual failure instead creates the following risk: Changing network ACLs cannot fix a missing export authorization and may introduce excessive access.

B:

The application host sees no eligible disk or an unintended initiator gains access if mappings are overly broad. That exposure would be addressed by create a correctly scoped igroup and map the intended LUN to authorized initiators using a valid LUN ID. The actual failure instead creates the following risk: Changing network ACLs cannot fix a missing export authorization and may introduce excessive access.

C:

Retries and path switches will not fix a capacity exhaustion condition and may extend application write failures. That exposure would be addressed by correlate aggregate physical space, volume settings and host error timestamps before treating the issue as a fabric outage. The actual failure instead creates the following risk: Changing network ACLs cannot fix a missing export authorization and may introduce excessive access.

Question 300

The team does not implement this safeguard: Select an ONTAP LIF service policy limited to the intended data protocols and required supporting services. The observed situation is: A data LIF is accessible but operators configured its service policy with management endpoints not required by the workload. Which risk remains MOST direct?

  1. A common network failure or unauthorized client may affect management and inter-node functions unexpectedly.
  2. An oversized LIF service policy can expose unnecessary management or protocol listeners to client segments.
  3. A recovered SVM may hold data but remain unreachable because its client address cannot move to a valid network port.
  4. Keeping overlapping subnets in one routing space can direct storage traffic toward the wrong tenant endpoint.

Explanation

Correct Answer

B:

The most direct exposure is: An oversized LIF service policy can expose unnecessary management or protocol listeners to client segments. The original situation is: A data LIF is accessible but operators configured its service policy with management endpoints not required by the workload. The omitted control is: Select an ONTAP LIF service policy limited to the intended data protocols and required supporting services. The technical rationale is: Service policies define which ONTAP network services are allowed on a logical interface. The correct remediation can be verified by: Port and protocol tests permit approved file access while unrelated administrative services remain unavailable.

Incorrect Answers

A:

A common network failure or unauthorized client may affect management and inter-node functions unexpectedly. That exposure would be addressed by separate cluster, management and client-serving network roles according to supported ONTAP and switch topology. The actual failure instead creates the following risk: An oversized LIF service policy can expose unnecessary management or protocol listeners to client segments.

C:

A recovered SVM may hold data but remain unreachable because its client address cannot move to a valid network port. That exposure would be addressed by map the correct broadcast domains, subnets and supported LIF failover behavior for the recovery site. The actual failure instead creates the following risk: An oversized LIF service policy can expose unnecessary management or protocol listeners to client segments.

D:

Keeping overlapping subnets in one routing space can direct storage traffic toward the wrong tenant endpoint. That exposure would be addressed by use separate supported ONTAP IPspaces and correct routing domains for overlapping tenant address plans. The actual failure instead creates the following risk: An oversized LIF service policy can expose unnecessary management or protocol listeners to client segments.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests

accept downloads in the last 7 days
What exactly is NS0-165 Premium File?

The NS0-165 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

NS0-165 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates NS0-165 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for NS0-165 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.