“firmware inventory and host trust checks report the enabled TPM” addresses platform security hardware is not initialized for the approved boot policy, but the current hardware or infrastructure issue is remote management sessions risk exposing credentials and system control. The option “TLS certificate checks pass and insecure management URLs are rejected” is more directly tied to the required outcome.

“measured boot data and approved reference values are available for review” addresses boot trust evidence is not enabled or preserved for the commissioned server, but the current hardware or infrastructure issue is remote management sessions risk exposing credentials and system control. The option “TLS certificate checks pass and insecure management URLs are rejected” is more directly tied to the required outcome.

“default credential login fails and authorized role-specific sessions work” addresses initial access hardening and credential change were omitted, but the current hardware or infrastructure issue is remote management sessions risk exposing credentials and system control. The option “TLS certificate checks pass and insecure management URLs are rejected” is more directly tied to the required outcome.

“enable supported TPM measurements and collect an attested baseline” addresses boot trust evidence is not enabled or preserved for the commissioned server, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “enable supported authenticated Redfish access for approved monitoring roles” is more directly tied to the required outcome.

“rotate factory BMC secrets and require role-scoped administrator access” addresses initial access hardening and credential change were omitted, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “enable supported authenticated Redfish access for approved monitoring roles” is more directly tied to the required outcome.

“configure trusted encrypted BMC management access and restrict insecure endpoints” addresses remote management sessions risk exposing credentials and system control, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “enable supported authenticated Redfish access for approved monitoring roles” is more directly tied to the required outcome.

“concurrent Redfish inventory queries return distinct expected chassis serials” addresses out-of-band address planning assigned overlapping management identities, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “permitted API calls return correct health and temperature objects” is more directly tied to the required outcome.

“default credential login fails and authorized role-specific sessions work” addresses initial access hardening and credential change were omitted, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “permitted API calls return correct health and temperature objects” is more directly tied to the required outcome.

“switch neighbor records and source-reachability tests show only OOB access” addresses cabling placed sensitive management traffic in the wrong network domain, but the current hardware or infrastructure issue is standards-based out-of-band monitoring was never configured. The option “permitted API calls return correct health and temperature objects” is more directly tied to the required outcome.

“configure trusted encrypted BMC management access and restrict insecure endpoints” addresses remote management sessions risk exposing credentials and system control, but the current hardware or infrastructure issue is privileged management activity cannot be tied to an individual operator. The option “configure unique accounts or central identity mapping with management audit logs” is more directly tied to the required outcome.

Useful for out-of-band address planning assigned overlapping management identities, but it does not remove the specific condition: privileged management activity cannot be tied to an individual operator.

“configure approved BMC time service and validate clock drift limits” addresses management controllers do not share a reliable time synchronization source, but the current hardware or infrastructure issue is privileged management activity cannot be tied to an individual operator. The option “configure unique accounts or central identity mapping with management audit logs” is more directly tied to the required outcome.

“concurrent Redfish inventory queries return distinct expected chassis serials” addresses out-of-band address planning assigned overlapping management identities, but the current hardware or infrastructure issue is privileged management activity cannot be tied to an individual operator. The option “sampled remote power actions record distinct authorized operator identities” is more directly tied to the required outcome.

“a host OS shutdown still leaves authenticated BMC power control reachable” addresses recovery access wrongly depends on the failed in-band compute environment, but the current hardware or infrastructure issue is privileged management activity cannot be tied to an individual operator. The option “sampled remote power actions record distinct authorized operator identities” is more directly tied to the required outcome.

“default credential login fails and authorized role-specific sessions work” addresses initial access hardening and credential change were omitted, but the current hardware or infrastructure issue is privileged management activity cannot be tied to an individual operator. The option “sampled remote power actions record distinct authorized operator identities” is more directly tied to the required outcome.

Useful for platform security hardware is not initialized for the approved boot policy, but it does not remove the specific condition: cabling placed sensitive management traffic in the wrong network domain.

“provision independent BMC remote power and console access through the OOB network” addresses recovery access wrongly depends on the failed in-band compute environment, but the current hardware or infrastructure issue is cabling placed sensitive management traffic in the wrong network domain. The option “move and verify the BMC port against the management-only port map” is more directly tied to the required outcome.

“configure trusted encrypted BMC management access and restrict insecure endpoints” addresses remote management sessions risk exposing credentials and system control, but the current hardware or infrastructure issue is cabling placed sensitive management traffic in the wrong network domain. The option “move and verify the BMC port against the management-only port map” is more directly tied to the required outcome.

“TLS certificate checks pass and insecure management URLs are rejected” addresses remote management sessions risk exposing credentials and system control, but the current hardware or infrastructure issue is cabling placed sensitive management traffic in the wrong network domain. The option “switch neighbor records and source-reachability tests show only OOB access” is more directly tied to the required outcome.

“firmware inventory and host trust checks report the enabled TPM” addresses platform security hardware is not initialized for the approved boot policy, but the current hardware or infrastructure issue is cabling placed sensitive management traffic in the wrong network domain. The option “switch neighbor records and source-reachability tests show only OOB access” is more directly tied to the required outcome.

“default credential login fails and authorized role-specific sessions work” addresses initial access hardening and credential change were omitted, but the current hardware or infrastructure issue is cabling placed sensitive management traffic in the wrong network domain. The option “switch neighbor records and source-reachability tests show only OOB access” is more directly tied to the required outcome.

“enable supported TPM measurements and collect an attested baseline” addresses boot trust evidence is not enabled or preserved for the commissioned server, but the current hardware or infrastructure issue is platform security hardware is not initialized for the approved boot policy. The option “activate the supported TPM and verify measured-boot prerequisites in firmware settings” is more directly tied to the required outcome.

Useful for cabling placed sensitive management traffic in the wrong network domain, but it does not remove the specific condition: platform security hardware is not initialized for the approved boot policy.

“provision independent BMC remote power and console access through the OOB network” addresses recovery access wrongly depends on the failed in-band compute environment, but the current hardware or infrastructure issue is platform security hardware is not initialized for the approved boot policy. The option “activate the supported TPM and verify measured-boot prerequisites in firmware settings” is more directly tied to the required outcome.

“measured boot data and approved reference values are available for review” addresses boot trust evidence is not enabled or preserved for the commissioned server, but the current hardware or infrastructure issue is platform security hardware is not initialized for the approved boot policy. The option “firmware inventory and host trust checks report the enabled TPM” is more directly tied to the required outcome.

“TLS certificate checks pass and insecure management URLs are rejected” addresses remote management sessions risk exposing credentials and system control, but the current hardware or infrastructure issue is platform security hardware is not initialized for the approved boot policy. The option “firmware inventory and host trust checks report the enabled TPM” is more directly tied to the required outcome.

“simultaneous hardware events align across controllers within the defined tolerance” addresses management controllers do not share a reliable time synchronization source, but the current hardware or infrastructure issue is platform security hardware is not initialized for the approved boot policy. The option “firmware inventory and host trust checks report the enabled TPM” is more directly tied to the required outcome.

Useful for remote management sessions risk exposing credentials and system control, but it does not remove the specific condition: management controllers do not share a reliable time synchronization source.

“move and verify the BMC port against the management-only port map” addresses cabling placed sensitive management traffic in the wrong network domain, but the current hardware or infrastructure issue is management controllers do not share a reliable time synchronization source. The option “configure approved BMC time service and validate clock drift limits” is more directly tied to the required outcome.

“allocate unique reserved BMC IPs with matching asset labels and DNS records” addresses out-of-band address planning assigned overlapping management identities, but the current hardware or infrastructure issue is management controllers do not share a reliable time synchronization source. The option “configure approved BMC time service and validate clock drift limits” is more directly tied to the required outcome.

“firmware inventory and host trust checks report the enabled TPM” addresses platform security hardware is not initialized for the approved boot policy, but the current hardware or infrastructure issue is management controllers do not share a reliable time synchronization source. The option “simultaneous hardware events align across controllers within the defined tolerance” is more directly tied to the required outcome.

“concurrent Redfish inventory queries return distinct expected chassis serials” addresses out-of-band address planning assigned overlapping management identities, but the current hardware or infrastructure issue is management controllers do not share a reliable time synchronization source. The option “simultaneous hardware events align across controllers within the defined tolerance” is more directly tied to the required outcome.

“sampled remote power actions record distinct authorized operator identities” addresses privileged management activity cannot be tied to an individual operator, but the current hardware or infrastructure issue is management controllers do not share a reliable time synchronization source. The option “simultaneous hardware events align across controllers within the defined tolerance” is more directly tied to the required outcome.