An iPad user still unlocks Outlook with Face ID after the security team expected a periodic managed-app PIN prompt. Which MAM setting is most relevant to inspect?
Whether the device screen brightness is set to automatic.
Whether the Exchange mailbox has a legal hold enabled.
Whether the user has used Microsoft Teams for the first time today.
Whether Override biometrics with PIN after timeout is required with the intended timeout value.
Explanation
Correct Answer
D:
Allowing biometrics without an override does not impose the desired periodic application PIN challenge.
Incorrect Answers
A:
Screen brightness cannot enforce an app-level authentication override.
B:
Mailbox retention does not configure the Intune managed-app PIN reauthentication timer.
C:
A different app’s usage does not establish the Outlook PIN override configuration.
Question 741
Which test demonstrates the app protection policy both permits biometric convenience and enforces the bounded PIN reauthentication?
Verify only that Face ID successfully unlocked the iPad.
Launch managed Outlook during the allowed biometric window, then exceed the configured timeout and verify the application requires its PIN.
Read the configured PIN length in the admin portal without testing the application.
Leave Outlook open without exceeding the timeout and infer the PIN will be required later.
Explanation
Correct Answer
B:
The two-phase runtime check distinguishes authentication within the permitted period from the mandatory PIN override afterward.
Incorrect Answers
A:
Device unlocking is not the same as MAM app PIN enforcement.
C:
A settings screenshot does not show the policy reached the client.
D:
The expected reauthentication boundary was never exercised.
Question 742
An organization allows personally owned iOS and Android phones to access Exchange Online only through apps with enforced Intune app protection. Compliance of the entire device is not required. Which Conditional Access grant best matches?
Use Require device to be marked compliant as the sole grant for unenrolled BYOD users.
Require app protection policy for the targeted cloud app and supported mobile client conditions, tested in report-only before enforcement.
Block Exchange access for all users, including approved protected clients.
Treat the deprecated approved-client-app-only grant as the forward-looking control.
Explanation
Correct Answer
B:
This grant requires an APP-protected client without imposing a device-wide compliance grant on BYOD.
Incorrect Answers
A:
Unenrolled personal phones generally cannot satisfy device-wide Intune compliance.
C:
A universal block fails the business requirement to allow protected apps.
D:
Microsoft directs new policies toward Require app protection policy rather than relying on the retiring approved-app-only control.
Question 743
A user signs into Exchange using a client that does not apply the assigned Intune app protection policy, and the CA policy targets the sign-in correctly. What condition should explain the denied session?
The chosen application does not satisfy the Require app protection policy grant required by Conditional Access.
The device lacks an unrelated Windows Autopilot profile.
The tenant must have blocked every client, including protected Outlook.
A Microsoft Entra user password is valid, so the grant must always be satisfied.
Explanation
Correct Answer
A:
The grant verifies an app protection context, not just valid account credentials or an allowed device platform.
Incorrect Answers
B:
A mobile app-protection grant does not depend on Windows Autopilot provisioning.
C:
A targeted APP grant can allow supported protected clients without a tenant-wide block.
D:
Successful primary authentication does not override the selected application protection grant.
Question 744
How can IT verify the CA policy accepts supported protected apps but excludes unprotected access?
Check only that the Intune app protection policy exists but never perform a sign-in.
Use a scoped report-only test and sign-in logs, then test protected Outlook succeeds and an unprotected client fails the app-protection grant when enforced.
Verify only that a compliant corporate laptop can sign in.
Mark all apps as approved in a spreadsheet.
Explanation
Correct Answer
B:
Positive and negative client behavior together demonstrate the grant rather than merely authentication.
Incorrect Answers
A:
A created APP does not prove the CA grant is evaluated in client sessions.
C:
The requirement is personal mobile application protection, not managed Windows device compliance.
D:
An inventory classification is not the Conditional Access policy execution result.
Question 745
An enterprise updates a directly deployed Android line-of-business app on corporate fully managed phones. The old app configuration policy worked for v3, but the v4 APK no longer receives its required endpoint URL. What should IT do?
Assume the old v3 configuration automatically migrates to the updated APK.
Move the app to personally owned work profile direct LOB deployment without testing support.
Change only the user’s corporate account display name in Entra.
Create and assign a new supported app configuration policy targeting the updated directly deployed LOB app version.
Explanation
Correct Answer
D:
Microsoft documents that existing configuration policies for directly deployed Android LOB apps do not automatically follow a newly deployed app version.
Incorrect Answers
A:
The direct LOB policy must be recreated or assigned appropriately for the new version.
B:
Direct LOB app configuration is restricted for those enrollment modes.
C:
A directory display name cannot deliver the missing version-specific app configuration key.
Question 746
After upgrading a directly deployed Android LOB app, devices install v4 but the app behaves as though its managed URL key is absent. What configuration lineage should be inspected?
Whether a Windows feature update has reached 25H2.
Whether the app’s splash screen has the same color on v3 and v4.
Whether an unrelated Microsoft Store desktop app is auto-updating.
Whether the assigned app configuration policy still targets only the previous LOB app version.
Explanation
Correct Answer
D:
App installation and version-specific managed configuration are separate delivery paths.
Incorrect Answers
A:
Windows OS version cannot account for the Android LOB managed key.
B:
Branding does not establish the Intune version-specific app configuration link.
C:
Store servicing has no causal relation to this direct Android LOB configuration.
Question 747
Which evidence confirms the corrected Android LOB v4 configuration is applied rather than just the binary installed?
Record only that the v4 APK installation status is Installed.
Inspect the managed Android app at v4 and verify the configured endpoint URL is present after the newly assigned v4 app configuration policy applies.
Show the v3 policy is still present without associating it to v4.
Open an unrelated managed browser and test a generic public site.
Explanation
Correct Answer
B:
The actual configured key on the updated app distinguishes policy delivery from package installation.
Incorrect Answers
A:
Package success does not prove managed app configuration was delivered.
C:
An older policy object cannot prove version-specific configuration reached v4.
D:
That test does not exercise the LOB app’s intended managed endpoint value.
Question 748
A company uses Intune-enrolled iPads with a vendor app deployed as an MDM-managed application. The vendor documents its allowed app-configuration keys for default server address and tenant label. Which Intune configuration route delivers these device-managed application preferences?
Create an app configuration policy for Managed devices using the documented app-specific keys and target the managed app cohort
Create only an app protection policy that blocks Save As and expect it to inject the server URL
Deploy the app configuration using Managed apps targeting while the target business app is enrolled-device managed only
Edit the vendor app display name in Intune and call it server configuration
Explanation
Correct Answer
A:
MDM-delivered app configuration depends on supported keys and an app installed in the managed device context
Incorrect Answers
B:
Data-loss prevention policy does not set vendor configuration keys
C:
The policy delivery channel must match the supported managed-device app configuration mechanism and actual target app identity.
D:
Metadata title does not change client settings
Question 749
A company uses Intune-enrolled iPads with a vendor app deployed as an MDM-managed application. The vendor documents its allowed app-configuration keys for default server address and tenant label. The app installs on iPads but retains its old server address after an Intune configuration policy reports Assigned. Which compatibility boundary should be examined?
The app must use Microsoft 365 Apps Click-to-Run update channels
The app version must support the specified configuration keys and be deployed in the managed-device channel targeted by the policy
iPads must be joined to on-premises Active Directory
The installed iPad application has the supported version and configuration key, but the app icon displays an older graphic
Explanation
Correct Answer
B:
Unknown or unsupported keys and channel mismatch can leave an app unconfigured
Incorrect Answers
A:
Office servicing is unrelated to this iPad vendor app
C:
iPad MDM app settings do not require Windows AD domain join
D:
App icon branding is not the supported-key, managed-device channel or targeting boundary responsible for whether an effective server address changes.
Question 750
A company uses Intune-enrolled iPads with a vendor app deployed as an MDM-managed application. The vendor documents its allowed app-configuration keys for default server address and tenant label. Which acceptance check confirms that configured preferences reached the managed app?
Confirm the vendor documentation contains the key name but do not inspect the app
Check only that the app reports Installed on the device
Count users in the target Entra group without opening the app
On an eligible enrolled iPad, read the app effective server/tenant settings and compare the assigned values with a deliberately excluded device
Explanation
Correct Answer
D:
Observed app configuration and targeting boundaries are stronger than a saved policy
Incorrect Answers
A:
Documentation support is not runtime delivery
B:
Installed binaries can still lack managed preferences
Our team works hard to provide students with high exam practice test questions and compelling learning experiences. We're confident of the quality level of the products we offer and provide no hassle satisfaction guarantee.
Why choose Exam-Labs?613,693+Satisfied Customers since 2015
100% Latest Exam Questions
Accurate & Updated Answers
Regular Free Updates
24/7 Customer Support
Instant Download
Exam Info
Microsoft MD-102 Practice Test Questions, Microsoft MD-102 Exam Practice Test Questions
Looking to pass your tests the first time. You can study with Microsoft MD-102 certification practice test questions and answers, study guide, training courses. With Exam-Labs VCE files you can prepare with Microsoft MD-102 Endpoint Administrator exam practice test questions and answers. The most complete solution for passing with Microsoft certification MD-102 exam practice test questions and answers, study guide, training course.
Microsoft MD-102: Managing and Securing Microsoft 365 Endpoints
Microsoft exam MD-102, Managing and Securing Microsoft 365 Endpoints by using Intune, is active as of October 1, 2026. Microsoft’s current skills outline, effective July 24, 2026, covers preparing infrastructure for devices, enrolling endpoints into Microsoft Entra ID and Microsoft Intune, implementing identity and compliance, managing and maintaining devices, managing and securing applications, protecting endpoints, and optimizing operations through automation, monitoring, and reporting.
Microsoft has also published a further English-language blueprint update for October 27, 2026. Because that date is still in the future, candidates taking the exam on October 1 should study the July 24 objectives and review the upcoming change log only if their scheduled exam will occur after the update. The Endpoint Administrator transition provides useful role context, but Microsoft’s live study guide remains the blueprint authority.
Endpoint administration begins with identity and enrollment architecture
Devices need an identity relationship with the organization before policies, applications, and access controls can be applied reliably. MD-102 candidates should understand Microsoft Entra join and registration concepts, enrollment methods, automatic enrollment, device platforms, ownership, and the prerequisites that make large-scale onboarding predictable. A manual process that works for ten devices may fail operationally when thousands of endpoints must be provisioned.
Practice should compare different onboarding scenarios: corporate Windows devices, personally owned mobile devices, shared or frontline devices, and replacement hardware. Ask what identity state is required, how the device reaches Intune, which user or group receives policy, and how the organization proves enrollment completed successfully.
Enrollment design also has licensing and platform-support implications. Some capabilities depend on Intune licensing, Microsoft Entra features, platform version, ownership type, or enrollment method. A candidate should learn to read a scenario for those prerequisites before choosing a configuration. Troubleshooting is faster when the administrator first verifies that the chosen management method is supported for the device and user population.
Windows Autopilot turns deployment into an identity-driven provisioning process
Modern Windows deployment increasingly separates device provisioning from traditional image-heavy workflows. Windows Autopilot can use hardware identity, deployment profiles, enrollment status controls, and cloud-delivered configuration so a device moves from factory state toward organizational readiness with less local intervention. Candidates need to understand where Autopilot fits and what infrastructure it still depends on.
A good lab resets a device or virtual machine and traces the complete provisioning experience. Observe when the user authenticates, when Entra identity is established, when Intune enrollment occurs, which profiles and apps arrive, and what can block the process. Troubleshooting Autopilot becomes much easier when candidates know the sequence rather than memorizing isolated settings.
Autopilot preparation should include hardware replacement and reset scenarios, not only first deployment. Organizations may reuse devices for different users, redeploy them after repair, or convert existing hardware into cloud-managed workflows. Understanding reset options, enrollment records, and device identity helps administrators avoid duplicate objects and ensures the correct profile is applied when a device changes hands.
Configuration profiles translate policy into repeatable endpoint state
Intune supports settings catalogs, templates, device restrictions, security baselines, certificates, Wi-Fi, VPN, and many other configuration mechanisms. MD-102 questions often test the ability to choose the correct policy type and scope. Overlapping profiles can create conflict, while weak targeting can leave devices unmanaged or apply controls to the wrong population.
Study by building a small policy hierarchy and documenting intent. Create baseline settings, add role-specific requirements, and then introduce a conflicting setting deliberately. Review reporting and determine which policy wins or where remediation is needed. This turns policy precedence from an abstract rule into observable endpoint behavior.
Configuration profiles also need assignment strategy. Dynamic groups, filters, platform targeting, exclusions, and phased rollout can reduce the risk of applying a disruptive setting to every device at once. Candidates should practice releasing a policy to a pilot group, checking reporting, and expanding deployment only after the result is understood. This is both a technical and an operational control.
Compliance and Conditional Access connect device health to resource access
A compliant-device signal is valuable because it can participate in access decisions, but compliance policy and Conditional Access are different layers. Intune evaluates whether a device meets defined requirements, while Entra Conditional Access can use that state with identity, application, location, risk, and other conditions to decide whether access should be granted.
Hands-on scenarios should test both layers. Mark a device noncompliant by violating a requirement, observe the reporting delay or remediation path, and then see how a Conditional Access policy changes the user experience. This clarifies why a compliance rule does not automatically block a resource unless access policy is configured to use it.
Compliance design should distinguish remediation grace periods from immediate enforcement. Some organizations allow users time to correct encryption, password, or threat conditions before access is restricted; others require immediate action for high-risk states. The exam can present the same technical control in different business contexts, so candidates should reason from the required risk posture rather than assume one universal setting.
Application management spans deployment, protection, configuration, and updates
MD-102 includes deploying and updating applications, configuring app protection and app configuration policies, and securing organizational data across managed and unmanaged devices. Candidates should understand app types, assignments, detection logic, dependencies, supersedence, mobile application management, and the distinction between managing the whole device and protecting data inside supported applications.
A useful lab deploys one Win32 app and one mobile application, then adds an app protection policy to a personally owned device scenario. Test what happens when data is copied to an unmanaged app or when an installation detection rule is wrong. These exercises reveal how application management depends on both packaging and policy design.
Application deployment at scale also depends on accurate detection and requirement logic. If Intune cannot reliably determine whether an app is already installed, devices may reinstall it repeatedly or report false failures. Practice should include testing install and uninstall commands, exit codes, dependencies, and detection rules outside the portal before assigning a package to production groups.
Endpoint security requires coordinated controls rather than one security switch
Security settings can span antivirus, firewall, disk encryption, attack surface reduction, account protection, security baselines, Defender for Endpoint integration, local privileges, and other controls. Candidates need to understand which service owns a setting and how the controls work together. Duplicating the same configuration through multiple mechanisms can make troubleshooting difficult.
The Microsoft Intune security discussion is most useful when paired with a lab that traces a security requirement from policy assignment to device state and reporting. The goal is not to enable every control, but to implement a deliberate security posture.
Endpoint security reporting should be treated as an operational feedback loop. A policy is not complete when it is assigned; administrators need to know which devices succeeded, which are pending, which conflict with another setting, and which users require remediation. This habit connects configuration, monitoring, and support and matches the increasingly operational emphasis of the current MD-102 blueprint.
Remote actions and lifecycle operations keep managed devices supportable
Endpoint administrators perform wipe, retire, sync, restart, remote lock, passcode reset, device cleanup, and other lifecycle operations. The correct action depends on ownership and business context. Retiring a personally owned device should protect organizational data without unnecessarily destroying personal content, while a lost corporate device may require a stronger response.
Scenario practice should include joiners, movers, leavers, lost devices, stale records, and ownership changes. For each scenario, identify what happens in Intune, Entra ID, application access, and corporate data. This helps candidates reason about the endpoint lifecycle instead of treating remote actions as interchangeable buttons.
Windows 365 and cloud PC scenarios add another endpoint type to the administrator’s mental model. The device experience may be virtual, but identity, access, policy, application delivery, and security still need coordinated management. Candidates should avoid assuming that virtual endpoints eliminate endpoint administration; they change provisioning and infrastructure boundaries while preserving many policy responsibilities.
Automation, monitoring, and reporting are now explicit endpoint-admin skills
The July 2026 blueprint added a distinct emphasis on automating management tasks and monitoring endpoint health. Modern administrators use PowerShell, Microsoft Graph, Intune reporting, analytics, remediation capabilities, and health information to manage fleets at scale. The exam increasingly reflects the reality that manual portal work does not scale to large environments.
Candidates should be able to identify what should be automated, how to scope an action safely, and which telemetry proves that the change worked. A script that changes thousands of devices needs safeguards, logging, and rollback thinking. The MD-102 endpoint administration material can provide structure, but automation practice should use realistic operational tasks.
Intune Suite add-on capabilities also require candidates to distinguish core management from optional advanced features. A scenario may mention remote assistance, privilege management, analytics, or specialized security capabilities that depend on additional licensing. Before selecting a feature, verify whether the organization actually has the required service and whether the capability is appropriate for the device population.
MD-102 preparation should use a mixed-device lab and a dated blueprint
A strong capstone environment includes at least a Windows endpoint and a mobile-device scenario, Entra identities and groups, Intune enrollment, configuration profiles, compliance, applications, endpoint security, Conditional Access integration, remote actions, and reporting. Work through the lifecycle from enrollment to retirement and deliberately create failures that require diagnosis.
Candidates should also be date-conscious. The July 24, 2026 skills outline is active on October 1; Microsoft’s October 27 update is upcoming. The MD-102 endpoint-administration role is useful for broad context, while the official study guide determines the objectives that apply on the actual exam date.
The upcoming October 27 blueprint should be reviewed only when it affects the candidate’s scheduled date. Microsoft often publishes future objectives in advance so learners can prepare for a transition. That does not mean the future outline becomes active immediately. Date discipline prevents candidates from studying the wrong weighting or assuming a newly announced feature is already being assessed.
Use Microsoft MD-102 certification exam practice test questions, study guide and training course - the complete package at discounted price. Pass with MD-102 Endpoint Administrator practice test questions and answers, study guide, complete training course especially formatted in VCE files. Latest Microsoft certification MD-102 exam practice test questions and answers will guarantee your success without studying for endless hours.
FAQs
Microsoft MD-102 Exam Practice Test Questions, Microsoft MD-102 Practice Test Questions and Answers
Do you have questions about our MD-102 Endpoint Administrator practice test questions and answers or any of our products? If you are not clear about our Microsoft MD-102 exam practice test questions, you can read the FAQ below.
The MD-102 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.
MD-102 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates MD-102 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.
What is VCE?
VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.
Can I try it for free?
Yes, you can. Look through free VCE files section and download any file you choose absolutely free.
Where do I get VCE Exam Simulator?
VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.
How are Premium VCE files different from Free VCE files?
Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.
Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.
How long will I receive updates for MD-102 Premium VCE File that I purchased?
Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.
How can I get the products after purchase?
All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.
Will I be able to renew my products when they expire?
Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.
Please note that you will not be able to use the product after it has expired if you don't renew it.
How often are the questions updated?
We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.
What is a Study Guide?
Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.
How can I open a Study Guide?
Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.
What is a Training Course?
Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Certification/Exam.
Enter Your Email Address to Proceed
Please fill out your email address below in order to purchase Demo.
How It Works
Step 1. Choose Exam on Exam-Labs
Download IT Exams Questions & Answers
Step 2. Open Exam with Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment