Pass Juniper JN0-650 Exam in First Attempt Easily

Latest Juniper JN0-650 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Practice Test 39

Question 380

The approved intervention was: Restore supported EVPN Type 3 inclusive-multicast route exchange and replication-list membership. What observable outcome would show that it addressed the original issue?

  1. The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol.
  2. Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.
  3. A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance.
  4. Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.

Explanation

Correct Answer

D:

EVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments. This tests the actual EVPN type3 BUM condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The observed evidence is decisive here because the EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol. The Juniper control here is “Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments”, supported by this specific technical distinction: EVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.

B:

“Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN” is relevant when the VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The observed evidence is decisive here because both ends report the same VNI for the tenant and its MAC reachability works over VXLAN. The Juniper control here is “Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments”, supported by this specific technical distinction: EVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.

C:

“A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance” is relevant when eVPN route targets govern which VPN instances import a route, independently of the host's MAC itself. The observed evidence is decisive here because a target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance. The Juniper control here is “Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments”, supported by this specific technical distinction: EVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.

Question 381

An operator documents this Junos scenario: After losing one link in a dual-homed Ethernet segment, remote PE devices keep forwarding through the failed attachment. Which response should be prioritized?

  1. Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI.
  2. Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address.
  3. Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment.
  4. Enable supported BGP EVPN signaling family between the intended route peers with necessary import/export policy.

Explanation

Correct Answer

C:

EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The specifically applicable intervention is: Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment. A discriminating confirmation would be: The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

Incorrect Answers

A:

“Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI” is relevant when eVPN Type 2 BGP routes distribute host MAC and optional IP bindings in the overlay control plane. The Juniper control here is “Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence.

B:

“Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address” is relevant when eVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The Juniper control here is “Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence.

D:

“Enable supported BGP EVPN signaling family between the intended route peers with necessary import/export policy” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The Juniper control here is “Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence.

Question 382

The site applied this change: Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment. What check most directly verifies the intended result?

  1. Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.
  2. The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol.
  3. Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.
  4. The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

Explanation

Correct Answer

D:

EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs. This tests the actual EVPN type1 Ethernet AD condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function” is relevant when eVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The observed evidence is decisive here because only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function. The Juniper control here is “The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

B:

“The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The observed evidence is decisive here because the EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol. The Juniper control here is “The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

C:

“Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments” is relevant when eVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments. The Juniper control here is “The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs”, supported by this specific technical distinction: EVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

Question 383

A network review identifies: Two leaves have working BGP EVPN sessions but a tenant's VLAN is mapped to VNI 50100 on one leaf and VNI 50200 on the other. Which action best addresses the root issue?

  1. Align approved VLAN-to-VNI mappings and associated EVPN instance policy across the tenant leafs.
  2. Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address.
  3. Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence.
  4. Restore supported EVPN Type 3 inclusive-multicast route exchange and replication-list membership.

Explanation

Correct Answer

A:

The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The specifically applicable intervention is: Align approved VLAN-to-VNI mappings and associated EVPN instance policy across the tenant leafs. A discriminating confirmation would be: Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.

Incorrect Answers

B:

“Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address” is relevant when eVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The Juniper control here is “Align approved VLAN-to-VNI mappings and associated EVPN instance policy across the tenant leafs”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging.

C:

“Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence” is relevant when eVPN multihoming resiliency depends on correct Ethernet-segment signaling and reachable surviving VTEPs. The Juniper control here is “Align approved VLAN-to-VNI mappings and associated EVPN instance policy across the tenant leafs”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging.

D:

“Restore supported EVPN Type 3 inclusive-multicast route exchange and replication-list membership” is relevant when eVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The Juniper control here is “Align approved VLAN-to-VNI mappings and associated EVPN instance policy across the tenant leafs”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging.

Question 384

To verify the repair, assess this original condition: Two leaves have working BGP EVPN sessions but a tenant's VLAN is mapped to VNI 50100 on one leaf and VNI 50200 on the other. Which test outcome best proves success?

  1. Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.
  2. A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance.
  3. The remote EVPN MAC table learns the advertised host MAC with the correct remote VTEP next hop.
  4. Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.

Explanation

Correct Answer

D:

The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The observed evidence is decisive here because both ends report the same VNI for the tenant and its MAC reachability works over VXLAN. This tests the actual EVPN VXLAN VNI mapping condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments” is relevant when eVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments. The Juniper control here is “Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The observed evidence is decisive here because both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.

B:

“A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance” is relevant when eVPN route targets govern which VPN instances import a route, independently of the host's MAC itself. The observed evidence is decisive here because a target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance. The Juniper control here is “Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The observed evidence is decisive here because both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.

C:

“The remote EVPN MAC table learns the advertised host MAC with the correct remote VTEP next hop” is relevant when eVPN Type 2 BGP routes distribute host MAC and optional IP bindings in the overlay control plane. The observed evidence is decisive here because the remote EVPN MAC table learns the advertised host MAC with the correct remote VTEP next hop. The Juniper control here is “Both ends report the same VNI for the tenant and its MAC reachability works over VXLAN”, supported by this specific technical distinction: The VXLAN VNI identifies the overlay broadcast domain and must map consistently for tenant bridging. The observed evidence is decisive here because both ends report the same VNI for the tenant and its MAC reachability works over VXLAN.

Question 385

At an enterprise Junos site, engineers encounter: A remote MAC is present in EVPN routes, yet packets cannot reach its VXLAN tunnel endpoint after a core routing change. Which intervention most directly resolves the fault?

  1. Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address.
  2. Trace EVPN MAC mobility sequence signaling and withdraw or supersede obsolete Type 2 MAC routes.
  3. Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI.
  4. Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment.

Explanation

Correct Answer

A:

EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The specifically applicable intervention is: Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address. A discriminating confirmation would be: A VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf.

Incorrect Answers

B:

“Trace EVPN MAC mobility sequence signaling and withdraw or supersede obsolete Type 2 MAC routes” is relevant when eVPN MAC mobility conveys a change of host location so remote VTEPs update forwarding. The Juniper control here is “Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop.

C:

“Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI” is relevant when eVPN Type 2 BGP routes distribute host MAC and optional IP bindings in the overlay control plane. The Juniper control here is “Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop.

D:

“Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment” is relevant when eVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The Juniper control here is “Restore underlay IP reachability and correct next-hop resolution to the remote VTEP address”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop.

Question 386

After remediation, the team must validate this previous condition: A remote MAC is present in EVPN routes, yet packets cannot reach its VXLAN tunnel endpoint after a core routing change. Which result is the strongest acceptance evidence?

  1. Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments.
  2. A VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf.
  3. A controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path.
  4. A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance.

Explanation

Correct Answer

B:

EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The observed evidence is decisive here because a VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf. This tests the actual EVPN VTEP underlay condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments” is relevant when eVPN Type 3 routes support discovery of VTEPs participating in broadcast, unknown-unicast and multicast distribution. The observed evidence is decisive here because remote VTEPs join the appropriate BUM replication set and ARP requests reach the intended VLAN segments. The Juniper control here is “A VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The observed evidence is decisive here because a VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf.

C:

“A controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path” is relevant when eVPN multihoming resiliency depends on correct Ethernet-segment signaling and reachable surviving VTEPs. The observed evidence is decisive here because a controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path. The Juniper control here is “A VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The observed evidence is decisive here because a VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf.

D:

“A target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance” is relevant when eVPN route targets govern which VPN instances import a route, independently of the host's MAC itself. The observed evidence is decisive here because a target-specific route check shows Tenant A MAC routes only in Tenant A's EVPN instance. The Juniper control here is “A VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf”, supported by this specific technical distinction: EVPN control-plane learning does not replace underlay IP transport to the VTEP next hop. The observed evidence is decisive here because a VTEP reachability test succeeds and VXLAN data packets arrive at the remote leaf.

Question 387

A JNCIP-ENT troubleshooting ticket states: Two leaf switches connect to the same dual-homed server but advertise inconsistent Ethernet segment identifiers. What should be changed or checked first?

  1. Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI.
  2. Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment.
  3. Configure one consistent approved ESI across the two attachment circuits and verify multihoming role support.
  4. Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence.

Explanation

Correct Answer

C:

ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior. The specifically applicable intervention is: Configure one consistent approved ESI across the two attachment circuits and verify multihoming role support. A discriminating confirmation would be: EVPN state recognizes one shared Ethernet segment with both eligible multihoming peers.

Incorrect Answers

A:

“Confirm EVPN Type 2 MAC/IP route advertisement and import policy for the host's VLAN/VNI” is relevant when eVPN Type 2 BGP routes distribute host MAC and optional IP bindings in the overlay control plane. The Juniper control here is “Configure one consistent approved ESI across the two attachment circuits and verify multihoming role support”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior.

B:

“Verify EVPN Type 1 Ethernet Auto-Discovery advertisements and withdrawal for the affected Ethernet segment” is relevant when eVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The Juniper control here is “Configure one consistent approved ESI across the two attachment circuits and verify multihoming role support”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior.

D:

“Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence” is relevant when eVPN multihoming resiliency depends on correct Ethernet-segment signaling and reachable surviving VTEPs. The Juniper control here is “Configure one consistent approved ESI across the two attachment circuits and verify multihoming role support”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior.

Question 388

A Junos monitoring review follows a repair for: Two leaf switches connect to the same dual-homed server but advertise inconsistent Ethernet segment identifiers. Which evidence should the reviewer demand?

  1. EVPN state recognizes one shared Ethernet segment with both eligible multihoming peers.
  2. A controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path.
  3. The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol.
  4. The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.

Explanation

Correct Answer

A:

ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior. The observed evidence is decisive here because eVPN state recognizes one shared Ethernet segment with both eligible multihoming peers. This tests the actual EVPN ESI multihoming condition rather than an unrelated operational symptom.

Incorrect Answers

B:

“A controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path” is relevant when eVPN multihoming resiliency depends on correct Ethernet-segment signaling and reachable surviving VTEPs. The observed evidence is decisive here because a controlled leaf failure preserves tenant reachability through the remaining advertised EVPN path. The Juniper control here is “EVPN state recognizes one shared Ethernet segment with both eligible multihoming peers”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior. The observed evidence is decisive here because eVPN state recognizes one shared Ethernet segment with both eligible multihoming peers.

C:

“The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The observed evidence is decisive here because the EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol. The Juniper control here is “EVPN state recognizes one shared Ethernet segment with both eligible multihoming peers”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior. The observed evidence is decisive here because eVPN state recognizes one shared Ethernet segment with both eligible multihoming peers.

D:

“The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs” is relevant when eVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs. The Juniper control here is “EVPN state recognizes one shared Ethernet segment with both eligible multihoming peers”, supported by this specific technical distinction: ESI identifies a multihomed Ethernet segment and underpins EVPN redundancy and split-horizon behavior. The observed evidence is decisive here because eVPN state recognizes one shared Ethernet segment with both eligible multihoming peers.

Question 389

An engineer is asked to fix this specific condition: Multicast frames duplicate to a dual-homed Ethernet segment because both attached leafs forward BUM traffic to the segment. What is the correct focused approach?

  1. Enable supported BGP EVPN signaling family between the intended route peers with necessary import/export policy.
  2. Correct EVPN import/export extended route-target membership per tenant EVI.
  3. Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence.
  4. Validate the Ethernet-segment designated-forwarder election and per-VLAN or EVI forwarding role.

Explanation

Correct Answer

D:

EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The specifically applicable intervention is: Validate the Ethernet-segment designated-forwarder election and per-VLAN or EVI forwarding role. A discriminating confirmation would be: Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.

Incorrect Answers

A:

“Enable supported BGP EVPN signaling family between the intended route peers with necessary import/export policy” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The Juniper control here is “Validate the Ethernet-segment designated-forwarder election and per-VLAN or EVI forwarding role”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments.

B:

“Correct EVPN import/export extended route-target membership per tenant EVI” is relevant when eVPN route targets govern which VPN instances import a route, independently of the host's MAC itself. The Juniper control here is “Validate the Ethernet-segment designated-forwarder election and per-VLAN or EVI forwarding role”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments.

C:

“Check ESI multihoming state, Type 1 withdrawal, surviving Type 2 routes and underlay next-hop convergence” is relevant when eVPN multihoming resiliency depends on correct Ethernet-segment signaling and reachable surviving VTEPs. The Juniper control here is “Validate the Ethernet-segment designated-forwarder election and per-VLAN or EVI forwarding role”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments.

Question 390

A change board is reviewing whether the following fault is corrected: Multicast frames duplicate to a dual-homed Ethernet segment because both attached leafs forward BUM traffic to the segment. Which observation is decisive?

  1. The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol.
  2. Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.
  3. The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs.
  4. Duplicate-MAC alarms clear after removing the unintended attachment and one authorized MAC location remains.

Explanation

Correct Answer

B:

EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The observed evidence is decisive here because only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function. This tests the actual EVPN designated forwarder condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“The EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol” is relevant when eVPN uses its own BGP address family for overlay reachability separate from IPv4 unicast NLRI. The observed evidence is decisive here because the EVPN BGP table contains expected Type 2 and Type 3 routes without changing the underlay protocol. The Juniper control here is “Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The observed evidence is decisive here because only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.

C:

“The failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs” is relevant when eVPN Type 1 routes signal Ethernet-segment reachability and support multihoming convergence. The observed evidence is decisive here because the failing member's Ethernet A-D route is withdrawn and remote forwarding uses surviving eligible PEs. The Juniper control here is “Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The observed evidence is decisive here because only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.

D:

“Duplicate-MAC alarms clear after removing the unintended attachment and one authorized MAC location remains” is relevant when a MAC learned at contradictory non-multihomed locations can signal a loop or duplicate identity. The observed evidence is decisive here because duplicate-MAC alarms clear after removing the unintended attachment and one authorized MAC location remains. The Juniper control here is “Only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function”, supported by this specific technical distinction: EVPN designated forwarder selection prevents duplicate BUM delivery on all-active multihomed segments. The observed evidence is decisive here because only the elected DF forwards BUM traffic toward the shared segment while the other peer remains standby for that function.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-650 Premium File?

The JN0-650 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-650 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-650 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-650 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.