Pass Juniper JN0-364 Exam in First Attempt Easily

Latest Juniper JN0-364 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 23

Question 220

For fictional Coastal IX, identify the shortcut that fails to address: An iBGP speaker receives a route from a border router but marks it hidden because its external next hop is unreachable in the IGP.

  1. Make every MED zero and disregard upstream policy to force a desired path.
  2. Remove session authentication everywhere because it prevents the mismatched peer from connecting.
  3. Lower local preference while leaving recursive NEXT_HOP reachability unresolved.
  4. Delete all BGP groups simply because a non-active historical prefix is visible somewhere.

Explanation

Correct Answer

C:

The proposed shortcut undermines the expected result: The iBGP route's next hop resolves and the correct prefix is active without leaking an external management network. The safer implementation step is: Restore approved underlay reachability or use an appropriate next-hop-self policy at the edge.

Incorrect Answers

A:

This shortcut would also be unsafe, but for a different BGP MED conditional comparison case (An operator expects a lower MED to override a higher local preference when choosing between multiple BGP paths.). It does not repeat the defect in this question: The advertised BGP NEXT_HOP attribute is not recursively resolvable from the internal router.

B:

The proposal recreates the separate BGP authentication mismatch error. The current case instead concerns: An iBGP speaker receives a route from a border router but marks it hidden because its external next hop is unreachable in the IGP. Its specific failed assumption is: The advertised BGP NEXT_HOP attribute is not recursively resolvable from the internal router.

D:

This shortcut would also be unsafe, but for a different BGP withdraw failure interpretation case (After a customer disconnects, an operator still sees its historical BGP prefix in a backup routing instance and assumes it is being advertised globally.). It does not repeat the defect in this question: The advertised BGP NEXT_HOP attribute is not recursively resolvable from the internal router.

Question 221

At fictional Trellis Education (campus WAN), this Junos network defect is reported: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. What should the specialist change first?

  1. Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.
  2. Apply a controlled outbound AS-path prepend on the backup advertisement and confirm peer acceptance, noting other networks retain discretion.
  3. Restore approved underlay reachability or use an appropriate next-hop-self policy at the edge.
  4. Restrict export terms to approved customer-visible prefixes and verify the peer-specific advertisement list.

Explanation

Correct Answer

A:

This response addresses the specific BGP authentication mismatch failure at Trellis Education. Apply: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest. Its acceptance test is: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

Incorrect Answers

B:

Although relevant to BGP AS path prepend inbound influence, this configuration does not remedy the reported BGP authentication mismatch failure. Use: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

C:

That action would address the separate BGP NEXT_HOP reachability case, where An iBGP speaker receives a route from a border router but marks it hidden because its external next hop is unreachable in the IGP. The present BGP authentication mismatch issue instead requires: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

D:

The proposal is a correction for BGP outbound prefix leak, not this situation: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. Here the cause is: Configured peer authentication keys are inconsistent between the two BGP endpoints.

Question 222

A Junos routing specialist investigates at fictional Trellis Education: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. What control gap requires attention?

  1. The provider's internal BGP policy assigns local preference values inconsistent with the intended egress decision.
  2. A neighbor-level configuration overrides the intended group-level export policy for that session.
  3. Configured peer authentication keys are inconsistent between the two BGP endpoints.
  4. The decision assumes MED outranks local preference in the BGP selection process, which is not generally correct.

Explanation

Correct Answer

C:

The most direct cause for BGP authentication mismatch is Configured peer authentication keys are inconsistent between the two BGP endpoints. The appropriate response is Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

Incorrect Answers

A:

This is a different failure mechanism: The provider's internal BGP policy assigns local preference values inconsistent with the intended egress decision. The current symptom is: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. The more direct defect is: Configured peer authentication keys are inconsistent between the two BGP endpoints.

B:

That diagnosis belongs to BGP peer group inheritance, for example: One member of a BGP group has a peer-specific outbound policy override and advertises a different set of prefixes than sibling peers. It does not explain this case, which is caused by: Configured peer authentication keys are inconsistent between the two BGP endpoints.

D:

This is a different failure mechanism: The decision assumes MED outranks local preference in the BGP selection process, which is not generally correct. The current symptom is: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. The more direct defect is: Configured peer authentication keys are inconsistent between the two BGP endpoints.

Question 223

Following remediation at fictional Trellis Education, how should the team verify that this specific issue is resolved? A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable.

  1. Transport reachability is confirmed and the BGP peer reaches Established without relaxing route import controls.
  2. The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.
  3. The observed reset reason is documented and a targeted correction yields stable Established state.
  4. show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

Explanation

Correct Answer

D:

The acceptance criterion must prove the original behavior changed: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail. This follows from the remedial action: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

Incorrect Answers

A:

That result would validate the separate BGP TCP reachability scenario (A BGP session to a directly connected peer stays Active while ping tests to the intended peer address fail due to an interface ACL.). It does not prove the needed BGP authentication mismatch outcome: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

B:

This observation is appropriate for BGP multihop design, not the BGP authentication mismatch defect at Trellis Education. Verify instead: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

C:

The alternative proof tests a different cause: Neighbor transition evidence and BGP error messages have not been examined to distinguish negotiation from route problems. The relevant acceptance condition remains: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

Question 224

After corrective implementation at fictional Trellis Education, reviewers revisit: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: The observed reset reason is documented and a targeted correction yields stable Established state.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: show bgp neighbor reports Established with the expected peer AS and authorized prefixes can be exchanged.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: Transport reachability is confirmed and the BGP peer reaches Established without relaxing route import controls.

Explanation

Correct Answer

C:

The repeated release test must confirm: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail. That check detects recurrence of the original defect: Configured peer authentication keys are inconsistent between the two BGP endpoints.

Incorrect Answers

A:

That control would prevent the different failure Neighbor transition evidence and BGP error messages have not been examined to distinguish negotiation from route problems. It would not detect recurrence of: Configured peer authentication keys are inconsistent between the two BGP endpoints.

B:

The proposed check belongs to the separate BGP AS number mismatch issue at Alder Telecom. For this case, retest: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail.

D:

That control would prevent the different failure The transport path does not permit the necessary TCP session and reachability, independent of route policy. It would not detect recurrence of: Configured peer authentication keys are inconsistent between the two BGP endpoints.

Question 225

For fictional Trellis Education, identify the shortcut that fails to address: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable.

  1. Remove session authentication everywhere because it prevents the mismatched peer from connecting.
  2. Change the group policy blindly and assume peer-specific overrides will disappear.
  3. Replace the customer policy with unconditional route acceptance across all peers.
  4. Lower local preference while leaving recursive NEXT_HOP reachability unresolved.

Explanation

Correct Answer

A:

The proposed shortcut undermines the expected result: show bgp neighbor returns Established after synchronized authentication and unauthorized attempts still fail. The safer implementation step is: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

Incorrect Answers

B:

This shortcut would also be unsafe, but for a different BGP peer group inheritance case (One member of a BGP group has a peer-specific outbound policy override and advertises a different set of prefixes than sibling peers.). It does not repeat the defect in this question: Configured peer authentication keys are inconsistent between the two BGP endpoints.

C:

The proposal recreates the separate BGP policy import filter error. The current case instead concerns: A BGP adjacency goes down immediately after a key change was applied on only one peer, while port 179 remains reachable. Its specific failed assumption is: Configured peer authentication keys are inconsistent between the two BGP endpoints.

D:

This alternative is problematic for BGP NEXT_HOP reachability, rather than the reported BGP authentication mismatch. Corrective action here is: Coordinate the intended BGP authentication key and session policy on both endpoints, then retest.

Question 226

At fictional Summit Transit (transport core), this Junos network defect is reported: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. What should the specialist change first?

  1. Adjust the internal local-preference policy for the desired upstream while checking for higher-priority selection constraints.
  2. Check the relevant RIB, current peer advertisements and route withdrawal state before deleting configurations.
  3. Verify the agreed remote autonomous system and update the BGP peer AS configuration on the affected side.
  4. Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

Explanation

Correct Answer

D:

The symptoms point to this control gap: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers. The targeted action is Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks. Verify success by confirming: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

Incorrect Answers

A:

That action would address the separate BGP local preference egress selection case, where Two routes learned from different upstream providers have comparable reachability, but outbound traffic follows the less-preferred contract. The present BGP multihop design issue instead requires: Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

B:

The proposal is a correction for BGP withdraw failure interpretation, not this situation: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. Here the cause is: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

C:

Although relevant to BGP AS number mismatch, this configuration does not remedy the reported BGP multihop design failure. Use: Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

Question 227

A Junos routing specialist investigates at fictional Summit Transit: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. What control gap requires attention?

  1. The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.
  2. The configured peer AS no longer matches the actual remote AS used in the BGP OPEN exchange.
  3. Without a deliberate upstream-accepted path-policy difference, remote AS path decisions may not prefer the intended primary ingress.
  4. An inbound route policy rejects the intended customer prefix before route selection.

Explanation

Correct Answer

A:

The most direct cause for BGP multihop design is The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers. The appropriate response is Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

Incorrect Answers

B:

This is a different failure mechanism: The configured peer AS no longer matches the actual remote AS used in the BGP OPEN exchange. The current symptom is: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. The more direct defect is: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

C:

That diagnosis belongs to BGP AS path prepend inbound influence, for example: A dual-homed customer wants to reduce inbound use of a backup circuit, but advertises identical AS paths on both upstream links. It does not explain this case, which is caused by: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

D:

The alternate cause would explain BGP policy import filter. For BGP multihop design at Summit Transit, the evidence instead supports: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

Question 228

Following remediation at fictional Summit Transit, how should the team verify that this specific issue is resolved? Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable.

  1. Transport reachability is confirmed and the BGP peer reaches Established without relaxing route import controls.
  2. The iBGP route's next hop resolves and the correct prefix is active without leaking an external management network.
  3. The specific neighbor's advertised prefix set agrees with the approved policy while intentional exceptions remain intact.
  4. The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

Explanation

Correct Answer

D:

Sign-off requires case-specific evidence: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift. Without that observation, the ebgp design lacks the appropriate multihop and local-address configuration for non-direct peers.

Incorrect Answers

A:

The alternative proof tests a different cause: The transport path does not permit the necessary TCP session and reachability, independent of route policy. The relevant acceptance condition remains: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

B:

That result would validate the separate BGP NEXT_HOP reachability scenario (An iBGP speaker receives a route from a border router but marks it hidden because its external next hop is unreachable in the IGP.). It does not prove the needed BGP multihop design outcome: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

C:

This observation is appropriate for BGP peer group inheritance, not the BGP multihop design defect at Summit Transit. Verify instead: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

Question 229

After corrective implementation at fictional Summit Transit, reviewers revisit: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: Transport reachability is confirmed and the BGP peer reaches Established without relaxing route import controls.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: Chosen paths match the configured local-preference intent and MED is considered only where applicable in the selection order.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: The external peer receives only the authorized prefixes and no internal management route.

Explanation

Correct Answer

A:

The repeated release test must confirm: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift. That check detects recurrence of the original defect: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

Incorrect Answers

B:

That control would prevent the different failure The transport path does not permit the necessary TCP session and reachability, independent of route policy. It would not detect recurrence of: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

C:

The proposed check belongs to the separate BGP MED conditional comparison issue at Stonebridge ISP. For this case, retest: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

D:

This recurring check measures BGP outbound prefix leak, whereas the fixed BGP multihop design behavior needs ongoing evidence that: The loopback-sourced eBGP session establishes across the routed path and survives a single intermediate link shift.

Question 230

For fictional Summit Transit, identify the shortcut that fails to address: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable.

  1. Remove session authentication everywhere because it prevents the mismatched peer from connecting.
  2. Claim AS-path prepending guarantees every Internet network will avoid the backup link.
  3. Advertise arbitrary prefixes to the loopback peer without configuring required transport reachability or multihop.
  4. Accept all received BGP prefixes to fix a TCP connection that cannot open.

Explanation

Correct Answer

C:

That shortcut preserves the original BGP multihop design weakness: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers. The controlled alternative is: Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

Incorrect Answers

A:

The proposal recreates the separate BGP authentication mismatch error. The current case instead concerns: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. Its specific failed assumption is: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

B:

This alternative is problematic for BGP AS path prepend inbound influence, rather than the reported BGP multihop design. Corrective action here is: Configure the approved multihop hop limit and local address on both ends and verify routing to peer loopbacks.

D:

The proposal recreates the separate BGP TCP reachability error. The current case instead concerns: Two loopback-sourced eBGP peers separated by multiple routed hops cannot connect although their loopbacks are mutually reachable. Its specific failed assumption is: The eBGP design lacks the appropriate multihop and local-address configuration for non-direct peers.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-364 Premium File?

The JN0-364 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-364 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-364 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-364 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.