Pass Juniper JN0-650 Exam in First Attempt Easily

Latest Juniper JN0-650 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Practice Test 26

Question 250

A technician has completed this work: Check LACP partner system/key consistency and compatible aggregate Ethernet membership on both switches. Which post-change observation most directly validates it?

  1. Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.
  2. Excessive flooding is rate-limited or the port enters its configured protective response while normal traffic works.
  3. Both physical members show active collecting/distributing state and the aggregate carries traffic.
  4. Full-size customer test frames cross the metro service without interface MTU drops.

Explanation

Correct Answer

C:

LACP negotiates a consistent logical bundle; physically connected links may be excluded if partner attributes differ. The observed evidence is decisive here because both physical members show active collecting/distributing state and the aggregate carries traffic. This tests the actual LACP bundling condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent. The Juniper control here is “Both physical members show active collecting/distributing state and the aggregate carries traffic”, supported by this specific technical distinction: LACP negotiates a consistent logical bundle; physically connected links may be excluded if partner attributes differ. The observed evidence is decisive here because both physical members show active collecting/distributing state and the aggregate carries traffic.

B:

“Excessive flooding is rate-limited or the port enters its configured protective response while normal traffic works” is relevant when storm control contains L2 traffic surges before they consume shared link and switch resources. The observed evidence is decisive here because excessive flooding is rate-limited or the port enters its configured protective response while normal traffic works. The Juniper control here is “Both physical members show active collecting/distributing state and the aggregate carries traffic”, supported by this specific technical distinction: LACP negotiates a consistent logical bundle; physically connected links may be excluded if partner attributes differ. The observed evidence is decisive here because both physical members show active collecting/distributing state and the aggregate carries traffic.

D:

“Full-size customer test frames cross the metro service without interface MTU drops” is relevant when stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops. The Juniper control here is “Both physical members show active collecting/distributing state and the aggregate carries traffic”, supported by this specific technical distinction: LACP negotiates a consistent logical bundle; physically connected links may be excluded if partner attributes differ. The observed evidence is decisive here because both physical members show active collecting/distributing state and the aggregate carries traffic.

Question 251

A Junos administrator observes: VLAN 200 flows over the wrong STP path because it was accidentally mapped to an MST instance with a different root. Which technical adjustment is most appropriate?

  1. Use supported VSTP instance configuration and per-VLAN bridge priorities on participating switches.
  2. Set appropriate bridge priorities per MST instance rather than changing only the common instance priority.
  3. Correct the VLAN-to-MST instance mapping consistently across the intended region.
  4. Restore one coherent supported spanning-tree design across the redundant L2 topology.

Explanation

Correct Answer

C:

MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The specifically applicable intervention is: Correct the VLAN-to-MST instance mapping consistently across the intended region. A discriminating confirmation would be: VLAN 200 follows the designated MST instance and the expected root-path forwarding topology.

Incorrect Answers

A:

“Use supported VSTP instance configuration and per-VLAN bridge priorities on participating switches” is relevant when vSTP maintains per-VLAN spanning-tree instances where supported, unlike a single common tree. The Juniper control here is “Correct the VLAN-to-MST instance mapping consistently across the intended region”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance.

B:

“Set appropriate bridge priorities per MST instance rather than changing only the common instance priority” is relevant when mSTP can maintain separate spanning-tree topologies per mapped VLAN group. The Juniper control here is “Correct the VLAN-to-MST instance mapping consistently across the intended region”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance.

D:

“Restore one coherent supported spanning-tree design across the redundant L2 topology” is relevant when sTP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The Juniper control here is “Correct the VLAN-to-MST instance mapping consistently across the intended region”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance.

Question 252

The approved intervention was: Correct the VLAN-to-MST instance mapping consistently across the intended region. What observable outcome would show that it addressed the original issue?

  1. Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.
  2. VLAN 200 follows the designated MST instance and the expected root-path forwarding topology.
  3. The intended distribution switch is root for each designated MST instance after a controlled election.
  4. Superior BPDUs on the protected interface do not displace the authorized root.

Explanation

Correct Answer

B:

MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The observed evidence is decisive here because vLAN 200 follows the designated MST instance and the expected root-path forwarding topology. This tests the actual MSTP VLAN mapping condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path” is relevant when sTP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The observed evidence is decisive here because redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path. The Juniper control here is “VLAN 200 follows the designated MST instance and the expected root-path forwarding topology”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The observed evidence is decisive here because vLAN 200 follows the designated MST instance and the expected root-path forwarding topology.

C:

“The intended distribution switch is root for each designated MST instance after a controlled election” is relevant when mSTP can maintain separate spanning-tree topologies per mapped VLAN group. The observed evidence is decisive here because the intended distribution switch is root for each designated MST instance after a controlled election. The Juniper control here is “VLAN 200 follows the designated MST instance and the expected root-path forwarding topology”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The observed evidence is decisive here because vLAN 200 follows the designated MST instance and the expected root-path forwarding topology.

D:

“Superior BPDUs on the protected interface do not displace the authorized root” is relevant when root protection keeps an untrusted downstream switch from taking control of STP root selection. The observed evidence is decisive here because superior BPDUs on the protected interface do not displace the authorized root. The Juniper control here is “VLAN 200 follows the designated MST instance and the expected root-path forwarding topology”, supported by this specific technical distinction: MSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The observed evidence is decisive here because vLAN 200 follows the designated MST instance and the expected root-path forwarding topology.

Question 253

An operator documents this Junos scenario: A switch access interface belongs to both a confidential VLAN and a public VLAN after a template change. Which response should be prioritized?

  1. Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration.
  2. Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link.
  3. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.
  4. Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken.

Explanation

Correct Answer

C:

Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The specifically applicable intervention is: Remove unauthorized VLAN membership and set the intended access/trunk mode precisely. A discriminating confirmation would be: MAC learning and broadcast captures show no frames crossing from confidential to public VLAN.

Incorrect Answers

A:

“Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration” is relevant when q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The Juniper control here is “Remove unauthorized VLAN membership and set the intended access/trunk mode precisely”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge.

B:

“Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The Juniper control here is “Remove unauthorized VLAN membership and set the intended access/trunk mode precisely”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge.

D:

“Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken” is relevant when per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The Juniper control here is “Remove unauthorized VLAN membership and set the intended access/trunk mode precisely”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge.

Question 254

The site applied this change: Remove unauthorized VLAN membership and set the intended access/trunk mode precisely. What check most directly verifies the intended result?

  1. Captured frames show the expected service outer tag and preserved customer inner tag on egress.
  2. MAC learning and broadcast captures show no frames crossing from confidential to public VLAN.
  3. Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.
  4. MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10.

Explanation

Correct Answer

B:

Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN. This tests the actual VLAN broadcast leak condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Captured frames show the expected service outer tag and preserved customer inner tag on egress” is relevant when provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress. The Juniper control here is “MAC learning and broadcast captures show no frames crossing from confidential to public VLAN”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN.

C:

“Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered” is relevant when mVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered. The Juniper control here is “MAC learning and broadcast captures show no frames crossing from confidential to public VLAN”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN.

D:

“MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10” is relevant when an Ethernet trunk carries each allowed VLAN through matching 802.1Q tags on both ends. The observed evidence is decisive here because mAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10. The Juniper control here is “MAC learning and broadcast captures show no frames crossing from confidential to public VLAN”, supported by this specific technical distinction: Layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN.

Question 255

A network review identifies: A VLAN repeatedly loses connectivity following a loop event, while a different VLAN on the same trunk is healthy. Which action best addresses the root issue?

  1. Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken.
  2. Restore one coherent supported spanning-tree design across the redundant L2 topology.
  3. Correct the VLAN-to-MST instance mapping consistently across the intended region.
  4. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.

Explanation

Correct Answer

A:

Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The specifically applicable intervention is: Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken. A discriminating confirmation would be: The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.

Incorrect Answers

B:

“Restore one coherent supported spanning-tree design across the redundant L2 topology” is relevant when sTP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The Juniper control here is “Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state.

C:

“Correct the VLAN-to-MST instance mapping consistently across the intended region” is relevant when mSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The Juniper control here is “Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state.

D:

“Remove unauthorized VLAN membership and set the intended access/trunk mode precisely” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The Juniper control here is “Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state.

Question 256

To verify the repair, assess this original condition: A VLAN repeatedly loses connectivity following a loop event, while a different VLAN on the same trunk is healthy. Which test outcome best proves success?

  1. show spanning-tree reports distinct correct root bridges for the two VLAN instances.
  2. The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.
  3. VLAN 200 follows the designated MST instance and the expected root-path forwarding topology.
  4. The intended distribution switch is root for each designated MST instance after a controlled election.

Explanation

Correct Answer

B:

Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The observed evidence is decisive here because the intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles. This tests the actual VSTP topology change condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“show spanning-tree reports distinct correct root bridges for the two VLAN instances” is relevant when vSTP maintains per-VLAN spanning-tree instances where supported, unlike a single common tree. The observed evidence is decisive here because show spanning-tree reports distinct correct root bridges for the two VLAN instances. The Juniper control here is “The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The observed evidence is decisive here because the intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.

C:

“VLAN 200 follows the designated MST instance and the expected root-path forwarding topology” is relevant when mSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The observed evidence is decisive here because vLAN 200 follows the designated MST instance and the expected root-path forwarding topology. The Juniper control here is “The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The observed evidence is decisive here because the intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.

D:

“The intended distribution switch is root for each designated MST instance after a controlled election” is relevant when mSTP can maintain separate spanning-tree topologies per mapped VLAN group. The observed evidence is decisive here because the intended distribution switch is root for each designated MST instance after a controlled election. The Juniper control here is “The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles”, supported by this specific technical distinction: Per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The observed evidence is decisive here because the intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.

Question 257

At an enterprise Junos site, engineers encounter: Hosts on two VLANs reach their own peers but cannot route to one another because the campus gateway IRB interfaces are absent. Which intervention most directly resolves the fault?

  1. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.
  2. Configure supported filter-based VLAN assignment with precise matching conditions and a default handling rule.
  3. Configure authorized IRB layer-3 gateways and route policy for the two VLANs with needed security controls.
  4. Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link.

Explanation

Correct Answer

C:

A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions. The specifically applicable intervention is: Configure authorized IRB layer-3 gateways and route policy for the two VLANs with needed security controls. A discriminating confirmation would be: Each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB.

Incorrect Answers

A:

“Remove unauthorized VLAN membership and set the intended access/trunk mode precisely” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The Juniper control here is “Configure authorized IRB layer-3 gateways and route policy for the two VLANs with needed security controls”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions.

B:

“Configure supported filter-based VLAN assignment with precise matching conditions and a default handling rule” is relevant when filter-based VLAN assignment classifies ingress traffic by configured criteria rather than just the interface's static VLAN. The Juniper control here is “Configure authorized IRB layer-3 gateways and route policy for the two VLANs with needed security controls”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions.

D:

“Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The Juniper control here is “Configure authorized IRB layer-3 gateways and route policy for the two VLANs with needed security controls”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions.

Question 258

After remediation, the team must validate this previous condition: Hosts on two VLANs reach their own peers but cannot route to one another because the campus gateway IRB interfaces are absent. Which result is the strongest acceptance evidence?

  1. Tenant-to-tenant L2 frames are blocked while every tenant still reaches the shared gateway.
  2. Each isolated host reaches the gateway but still cannot directly reach another isolated host.
  3. Each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB.
  4. show spanning-tree reports distinct correct root bridges for the two VLAN instances.

Explanation

Correct Answer

C:

A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions. The observed evidence is decisive here because each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB. This tests the actual Switch VLAN IRB condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Tenant-to-tenant L2 frames are blocked while every tenant still reaches the shared gateway” is relevant when private VLAN isolation separates peer hosts inside the same primary broadcast-domain infrastructure. The observed evidence is decisive here because tenant-to-tenant L2 frames are blocked while every tenant still reaches the shared gateway. The Juniper control here is “Each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions. The observed evidence is decisive here because each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB.

B:

“Each isolated host reaches the gateway but still cannot directly reach another isolated host” is relevant when a private-VLAN promiscuous port provides shared gateway access across secondary private VLANs. The observed evidence is decisive here because each isolated host reaches the gateway but still cannot directly reach another isolated host. The Juniper control here is “Each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions. The observed evidence is decisive here because each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB.

D:

“show spanning-tree reports distinct correct root bridges for the two VLAN instances” is relevant when vSTP maintains per-VLAN spanning-tree instances where supported, unlike a single common tree. The observed evidence is decisive here because show spanning-tree reports distinct correct root bridges for the two VLAN instances. The Juniper control here is “Each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB”, supported by this specific technical distinction: A VLAN is a layer-2 domain; inter-VLAN traffic requires a layer-3 routing interface and permissions. The observed evidence is decisive here because each host reaches its VLAN gateway and only approved cross-VLAN traffic routes through IRB.

Question 259

A JNCIP-ENT troubleshooting ticket states: A campus pair of switches has redundant physical links and an intermittent broadcast storm after STP was disabled on one bridge. What should be changed or checked first?

  1. Enable root protection on the distribution-to-access interface as designed.
  2. Correct the VLAN-to-MST instance mapping consistently across the intended region.
  3. Restore one coherent supported spanning-tree design across the redundant L2 topology.
  4. Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken.

Explanation

Correct Answer

C:

STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The specifically applicable intervention is: Restore one coherent supported spanning-tree design across the redundant L2 topology. A discriminating confirmation would be: Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.

Incorrect Answers

A:

“Enable root protection on the distribution-to-access interface as designed” is relevant when root protection keeps an untrusted downstream switch from taking control of STP root selection. The Juniper control here is “Restore one coherent supported spanning-tree design across the redundant L2 topology”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes.

B:

“Correct the VLAN-to-MST instance mapping consistently across the intended region” is relevant when mSTP applies the instance's spanning-tree topology to every VLAN mapped into that instance. The Juniper control here is “Restore one coherent supported spanning-tree design across the redundant L2 topology”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes.

D:

“Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken” is relevant when per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The Juniper control here is “Restore one coherent supported spanning-tree design across the redundant L2 topology”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes.

Question 260

A Junos monitoring review follows a repair for: A campus pair of switches has redundant physical links and an intermittent broadcast storm after STP was disabled on one bridge. Which evidence should the reviewer demand?

  1. Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.
  2. The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles.
  3. Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.
  4. The port enters its configured protective state when a test BPDU is received.

Explanation

Correct Answer

C:

STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The observed evidence is decisive here because redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path. This tests the actual Spanning tree topology plan condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate” is relevant when l2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate. The Juniper control here is “Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The observed evidence is decisive here because redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.

B:

“The intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles” is relevant when per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The observed evidence is decisive here because the intended VLAN instance stabilizes with the correct root and forwarding or blocking port roles. The Juniper control here is “Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The observed evidence is decisive here because redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.

D:

“The port enters its configured protective state when a test BPDU is received” is relevant when bPDU protection guards access edges against unintended layer-2 switching devices. The observed evidence is decisive here because the port enters its configured protective state when a test BPDU is received. The Juniper control here is “Redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path”, supported by this specific technical distinction: STP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The observed evidence is decisive here because redundant links converge into a loop-free forwarding tree and loss of one link restores an alternate path.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-650 Premium File?

The JN0-650 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-650 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-650 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-650 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.