Pass Juniper JN0-650 Exam in First Attempt Easily

Latest Juniper JN0-650 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-650 Questions & Answers
Exam Code: JN0-650
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Certification Provider: Juniper
JN0-650 Premium File
107 Questions & Answers
Last Update: Nov 8, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Practice Test 23

Question 220

The approved intervention was: Repair MVRP VLAN registration and compatible port participation through the intermediate switch path. What observable outcome would show that it addressed the original issue?

  1. Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.
  2. Servers within the community exchange L2 frames while other communities cannot communicate directly.
  3. Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.
  4. MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10.

Explanation

Correct Answer

A:

MVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered. This tests the actual MVRP VLAN registration condition rather than an unrelated operational symptom.

Incorrect Answers

B:

“Servers within the community exchange L2 frames while other communities cannot communicate directly” is relevant when private-VLAN community ports can communicate within their community while remaining isolated from other secondary groups. The observed evidence is decisive here because servers within the community exchange L2 frames while other communities cannot communicate directly. The Juniper control here is “Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered”, supported by this specific technical distinction: MVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.

C:

“Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent. The Juniper control here is “Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered”, supported by this specific technical distinction: MVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.

D:

“MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10” is relevant when an Ethernet trunk carries each allowed VLAN through matching 802.1Q tags on both ends. The observed evidence is decisive here because mAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10. The Juniper control here is “Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered”, supported by this specific technical distinction: MVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.

Question 221

An operator documents this Junos scenario: After enabling automatic VLAN registration, an unapproved VLAN appears on an access-distribution link. Which response should be prioritized?

  1. Assign the correct access VLAN to the untagged port and ensure switchport membership is not overridden.
  2. Repair MVRP VLAN registration and compatible port participation through the intermediate switch path.
  3. Configure compatible tagged trunk membership for VLAN 20 at both ends of the uplink.
  4. Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link.

Explanation

Correct Answer

D:

Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The specifically applicable intervention is: Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link. A discriminating confirmation would be: Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.

Incorrect Answers

A:

“Assign the correct access VLAN to the untagged port and ensure switchport membership is not overridden” is relevant when an untagged access-port VLAN determines the layer-2 broadcast domain of attached ordinary hosts. The Juniper control here is “Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension.

B:

“Repair MVRP VLAN registration and compatible port participation through the intermediate switch path” is relevant when mVRP propagates VLAN membership information only through participating registered links. The Juniper control here is “Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension.

C:

“Configure compatible tagged trunk membership for VLAN 20 at both ends of the uplink” is relevant when an Ethernet trunk carries each allowed VLAN through matching 802.1Q tags on both ends. The Juniper control here is “Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension.

Question 222

The site applied this change: Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link. What check most directly verifies the intended result?

  1. MAC learning and broadcast captures show no frames crossing from confidential to public VLAN.
  2. Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.
  3. show spanning-tree reports distinct correct root bridges for the two VLAN instances.
  4. Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered.

Explanation

Correct Answer

B:

Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent. This tests the actual MVRP unauthorized VLAN condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“MAC learning and broadcast captures show no frames crossing from confidential to public VLAN” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN. The Juniper control here is “Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.

C:

“show spanning-tree reports distinct correct root bridges for the two VLAN instances” is relevant when vSTP maintains per-VLAN spanning-tree instances where supported, unlike a single common tree. The observed evidence is decisive here because show spanning-tree reports distinct correct root bridges for the two VLAN instances. The Juniper control here is “Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.

D:

“Dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered” is relevant when mVRP propagates VLAN membership information only through participating registered links. The observed evidence is decisive here because dynamic registration shows the tenant VLAN on required trunks and end-to-end frames are delivered. The Juniper control here is “Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent”, supported by this specific technical distinction: Dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.

Question 223

A network review identifies: A service provider needs to carry customer VLAN 20 across a metro Ethernet network without confusing it with the provider's own VLAN 20. Which action best addresses the root issue?

  1. Use supported VSTP instance configuration and per-VLAN bridge priorities on participating switches.
  2. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.
  3. Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge.
  4. Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration.

Explanation

Correct Answer

D:

Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The specifically applicable intervention is: Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration. A discriminating confirmation would be: A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.

Incorrect Answers

A:

“Use supported VSTP instance configuration and per-VLAN bridge priorities on participating switches” is relevant when vSTP maintains per-VLAN spanning-tree instances where supported, unlike a single common tree. The Juniper control here is “Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity.

B:

“Remove unauthorized VLAN membership and set the intended access/trunk mode precisely” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The Juniper control here is “Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity.

C:

“Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge” is relevant when l2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The Juniper control here is “Encapsulate the customer's 802.1Q tag beneath a distinct provider service tag using supported Q-in-Q configuration”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity.

Question 224

To verify the repair, assess this original condition: A service provider needs to carry customer VLAN 20 across a metro Ethernet network without confusing it with the provider's own VLAN 20. Which test outcome best proves success?

  1. Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.
  2. Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.
  3. A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.
  4. Captured frames show the expected service outer tag and preserved customer inner tag on egress.

Explanation

Correct Answer

C:

Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge. This tests the actual Q-in-Q provider tag condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate” is relevant when l2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate. The Juniper control here is “A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.

B:

“Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent. The Juniper control here is “A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.

D:

“Captured frames show the expected service outer tag and preserved customer inner tag on egress” is relevant when provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress. The Juniper control here is “A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge”, supported by this specific technical distinction: Q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.

Question 225

At an enterprise Junos site, engineers encounter: Small customer frames traverse a Q-in-Q service but near-MTU customer frames are dropped at a provider trunk. Which intervention most directly resolves the fault?

  1. Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken.
  2. Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead.
  3. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.
  4. Apply an appropriate broadcast/unknown-unicast storm-control threshold on the affected access port.

Explanation

Correct Answer

B:

Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The specifically applicable intervention is: Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead. A discriminating confirmation would be: Full-size customer test frames cross the metro service without interface MTU drops.

Incorrect Answers

A:

“Inspect the affected VLAN's VSTP root, port roles and topology-change counters rather than treating the trunk as uniformly broken” is relevant when per-VLAN spanning tree can fail independently on a shared trunk when one instance has bad control state. The Juniper control here is “Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned.

C:

“Remove unauthorized VLAN membership and set the intended access/trunk mode precisely” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The Juniper control here is “Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned.

D:

“Apply an appropriate broadcast/unknown-unicast storm-control threshold on the affected access port” is relevant when storm control contains L2 traffic surges before they consume shared link and switch resources. The Juniper control here is “Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned.

Question 226

After remediation, the team must validate this previous condition: Small customer frames traverse a Q-in-Q service but near-MTU customer frames are dropped at a provider trunk. Which result is the strongest acceptance evidence?

  1. Full-size customer test frames cross the metro service without interface MTU drops.
  2. A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.
  3. Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.
  4. Captured frames show the expected service outer tag and preserved customer inner tag on egress.

Explanation

Correct Answer

A:

Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops. This tests the actual Q-in-Q MTU overhead condition rather than an unrelated operational symptom.

Incorrect Answers

B:

“A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge” is relevant when q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge. The Juniper control here is “Full-size customer test frames cross the metro service without interface MTU drops”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops.

C:

“Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate” is relevant when l2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate. The Juniper control here is “Full-size customer test frames cross the metro service without interface MTU drops”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops.

D:

“Captured frames show the expected service outer tag and preserved customer inner tag on egress” is relevant when provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress. The Juniper control here is “Full-size customer test frames cross the metro service without interface MTU drops”, supported by this specific technical distinction: Stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops.

Question 227

A JNCIP-ENT troubleshooting ticket states: A customer wants to run its own spanning-tree protocol across an Ethernet provider service, but the service drops customer BPDUs. What should be changed or checked first?

  1. Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge.
  2. Restore one coherent supported spanning-tree design across the redundant L2 topology.
  3. Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead.
  4. Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging.

Explanation

Correct Answer

A:

L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The specifically applicable intervention is: Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge. A discriminating confirmation would be: Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.

Incorrect Answers

B:

“Restore one coherent supported spanning-tree design across the redundant L2 topology” is relevant when sTP blocks redundant layer-2 loops while preserving alternate connectivity after topology changes. The Juniper control here is “Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane.

C:

“Increase supported L2 frame size/MTU along the service path to accommodate the additional VLAN tag overhead” is relevant when stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The Juniper control here is “Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane.

D:

“Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging” is relevant when provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The Juniper control here is “Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane.

Question 228

A Junos monitoring review follows a repair for: A customer wants to run its own spanning-tree protocol across an Ethernet provider service, but the service drops customer BPDUs. Which evidence should the reviewer demand?

  1. A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge.
  2. Captured frames show the expected service outer tag and preserved customer inner tag on egress.
  3. Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.
  4. MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10.

Explanation

Correct Answer

C:

L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate. This tests the actual L2 protocol tunneling condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“A transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge” is relevant when q-in-Q adds a service-provider VLAN tag while preserving the customer's inner VLAN identity. The observed evidence is decisive here because a transit capture shows an outer provider tag and intact inner customer VLAN 20 tag at the service edge. The Juniper control here is “Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.

B:

“Captured frames show the expected service outer tag and preserved customer inner tag on egress” is relevant when provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress. The Juniper control here is “Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.

D:

“MAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10” is relevant when an Ethernet trunk carries each allowed VLAN through matching 802.1Q tags on both ends. The observed evidence is decisive here because mAC learning and host connectivity work on VLAN 20 without bridging it into VLAN 10. The Juniper control here is “Customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate”, supported by this specific technical distinction: L2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The observed evidence is decisive here because customer BPDUs traverse the service within the permitted tunnel and provider STP remains separate.

Question 229

An engineer is asked to fix this specific condition: A troubleshooting capture shows a customer VLAN tag on the outside and a service tag on the inside at the provider ingress. What is the correct focused approach?

  1. Remove unauthorized VLAN membership and set the intended access/trunk mode precisely.
  2. Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge.
  3. Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link.
  4. Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging.

Explanation

Correct Answer

D:

Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The specifically applicable intervention is: Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging. A discriminating confirmation would be: Captured frames show the expected service outer tag and preserved customer inner tag on egress.

Incorrect Answers

A:

“Remove unauthorized VLAN membership and set the intended access/trunk mode precisely” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The Juniper control here is “Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated.

B:

“Configure supported layer-2 protocol tunneling for designated customer control traffic at the provider edge” is relevant when l2 protocol tunneling transports customer layer-2 control frames without merging the provider's own control plane. The Juniper control here is “Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated.

C:

“Apply supported MVRP boundary restrictions or explicit VLAN membership filtering on the link” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The Juniper control here is “Correct the customer-facing and provider-facing tag push/translation sequence for supported double tagging”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated.

Question 230

A change board is reviewing whether the following fault is corrected: A troubleshooting capture shows a customer VLAN tag on the outside and a service tag on the inside at the provider ingress. Which observation is decisive?

  1. Full-size customer test frames cross the metro service without interface MTU drops.
  2. Captured frames show the expected service outer tag and preserved customer inner tag on egress.
  3. MAC learning and broadcast captures show no frames crossing from confidential to public VLAN.
  4. Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent.

Explanation

Correct Answer

B:

Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress. This tests the actual Q-in-Q tag order condition rather than an unrelated operational symptom.

Incorrect Answers

A:

“Full-size customer test frames cross the metro service without interface MTU drops” is relevant when stacking tags adds Ethernet header overhead that can exceed the supported frame size if not planned. The observed evidence is decisive here because full-size customer test frames cross the metro service without interface MTU drops. The Juniper control here is “Captured frames show the expected service outer tag and preserved customer inner tag on egress”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress.

C:

“MAC learning and broadcast captures show no frames crossing from confidential to public VLAN” is relevant when layer-2 VLAN segmentation relies on correct port membership and tag handling on every switch edge. The observed evidence is decisive here because mAC learning and broadcast captures show no frames crossing from confidential to public VLAN. The Juniper control here is “Captured frames show the expected service outer tag and preserved customer inner tag on egress”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress.

D:

“Only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent” is relevant when dynamic VLAN propagation still requires an explicit admission boundary to prevent unintended broadcast-domain extension. The observed evidence is decisive here because only allowed VLAN IDs are registered across the boundary and the disallowed tenant VLAN is absent. The Juniper control here is “Captured frames show the expected service outer tag and preserved customer inner tag on egress”, supported by this specific technical distinction: Provider bridging decisions use the outer service tag while the customer's 802.1Q VLAN tag stays encapsulated. The observed evidence is decisive here because captured frames show the expected service outer tag and preserved customer inner tag on egress.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-650 Premium File?

The JN0-650 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-650 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-650 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-650 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.