Pass Juniper JN0-364 Exam in First Attempt Easily

Latest Juniper JN0-364 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 48

Question 470

For fictional Nova Backbone, identify the shortcut that fails to address: A routing daemon restarts briefly, and an engineer expects all neighbors to flush retained routes even though graceful restart was configured.

  1. Declare the LAG failed because a single five-tuple flow did not split packet by packet.
  2. Assume GRES alone guarantees every BGP and IS-IS neighbor remains unreset in any configuration.
  3. Schedule repeated unplanned RE resets as a substitute for validating backup readiness.
  4. Disable all GR helpers and assume forwarding continuity is unaffected by every protocol restart.

Explanation

Correct Answer

D:

Reject this option for the observed incident at Nova Backbone: A routing daemon restarts briefly, and an engineer expects all neighbors to flush retained routes even though graceful restart was configured. Use instead: Validate GR capability and neighbor helper support, restart window and forwarding continuity for the selected protocol.

Incorrect Answers

A:

The proposal recreates the separate LAG load sharing error. The current case instead concerns: A routing daemon restarts briefly, and an engineer expects all neighbors to flush retained routes even though graceful restart was configured. Its specific failed assumption is: Graceful restart relies on coordinated protocol helper behavior and retained forwarding state to support an appropriate recovery interval.

B:

This alternative is problematic for NSR protocol continuity, rather than the reported Graceful restart forwarding continuity. Corrective action here is: Validate GR capability and neighbor helper support, restart window and forwarding continuity for the selected protocol.

C:

This shortcut would also be unsafe, but for a different Dual Routing Engine status check case (A maintenance team schedules a master RE switchover without verifying the standby RE's health, software compatibility or synchronization state.). It does not repeat the defect in this question: Graceful restart relies on coordinated protocol helper behavior and retained forwarding state to support an appropriate recovery interval.

Question 471

At fictional Lighthouse Broadband (residential ISP), this Junos network defect is reported: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. What should the specialist change first?

  1. Align the VRRP virtual-router identifiers and addresses under the approved configuration and inspect master backup state.
  2. Verify NSB feature support and synchronized bridge state across the routing-engine pair.
  3. Validate GR capability and neighbor helper support, restart window and forwarding continuity for the selected protocol.
  4. Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test.

Explanation

Correct Answer

D:

Correct because the observable problem is: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. Use the controlled remedy: Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test. Confirm the resulting state with: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

Incorrect Answers

A:

Although relevant to VRRP virtual gateway master, this configuration does not remedy the reported GRES Routing Engine failover failure. Use: Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test.

B:

That action would address the separate Nonstop bridging control state case, where A dual-RE switching platform carries VLAN traffic during a failover but relearns many MAC addresses because bridging state was not preserved. The present GRES Routing Engine failover issue instead requires: Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test.

C:

The proposal is a correction for Graceful restart forwarding continuity, not this situation: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. Here the cause is: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Question 472

A Junos routing specialist investigates at fictional Lighthouse Broadband: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. What control gap requires attention?

  1. The routing protocol lacks the planned BFD-assisted rapid failure detection for that forwarding path.
  2. The routers do not participate in the same agreed VRRP group and therefore cannot coordinate master election.
  3. Local and peer LACP settings or member compatibility do not satisfy bundle negotiation requirements.
  4. Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Explanation

Correct Answer

D:

The scenario is explained by: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup. This is distinct from unrelated application failures. The recommended correction is: Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test.

Incorrect Answers

A:

That diagnosis belongs to BFD fast failure detection, for example: A transit link suffers one-way forwarding failure while an IGP neighbor waits for a much longer protocol hold timer to expire. It does not explain this case, which is caused by: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

B:

The alternate cause would explain VRRP virtual gateway master. For GRES Routing Engine failover at Lighthouse Broadband, the evidence instead supports: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

C:

This is a different failure mechanism: Local and peer LACP settings or member compatibility do not satisfy bundle negotiation requirements. The current symptom is: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. The more direct defect is: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Question 473

Following remediation at fictional Lighthouse Broadband, how should the team verify that this specific issue is resolved? A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed.

  1. The LAG remains healthy and multiple independent flow hashes use the intended member distribution.
  2. One router is Master and the other Backup for the same virtual gateway, with failover preserving the default gateway.
  3. Preflight confirms healthy compatible routing engines and the controlled switchover meets the documented continuity objective.
  4. A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

Explanation

Correct Answer

D:

This outcome directly measures GRES Routing Engine failover: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state. It tests the diagnosed issue: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Incorrect Answers

A:

This observation is appropriate for LAG load sharing, not the GRES Routing Engine failover defect at Lighthouse Broadband. Verify instead: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

B:

The alternative proof tests a different cause: The routers do not participate in the same agreed VRRP group and therefore cannot coordinate master election. The relevant acceptance condition remains: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

C:

That result would validate the separate Dual Routing Engine status check scenario (A maintenance team schedules a master RE switchover without verifying the standby RE's health, software compatibility or synchronization state.). It does not prove the needed GRES Routing Engine failover outcome: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

Question 474

After corrective implementation at fictional Lighthouse Broadband, reviewers revisit: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: Both intended interfaces appear in the operational LAG and the bundle remains forwarding after one member fails.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: A controlled RE switchover preserves the approved bridge MAC state and bridging traffic behavior.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: Preflight confirms healthy compatible routing engines and the controlled switchover meets the documented continuity objective.

Explanation

Correct Answer

B:

The repeated release test must confirm: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state. That check detects recurrence of the original defect: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Incorrect Answers

A:

The proposed check belongs to the separate LACP aggregate member mismatch issue at Sterling Cloud. For this case, retest: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

C:

That control would prevent the different failure The intended nonstop bridging capability or supported bridge-state synchronization is absent or incomplete. It would not detect recurrence of: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

D:

The proposed check belongs to the separate Dual Routing Engine status check issue at Morrow Networks. For this case, retest: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state.

Question 475

For fictional Lighthouse Broadband, identify the shortcut that fails to address: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed.

  1. Force an unrelated interface into the aggregate without checking negotiated LACP partner state.
  2. Disable all GR helpers and assume forwarding continuity is unaffected by every protocol restart.
  3. Force power removal of the master RE repeatedly before verifying that the backup is ready.
  4. Declare the LAG failed because a single five-tuple flow did not split packet by packet.

Explanation

Correct Answer

C:

The proposed shortcut undermines the expected result: A planned RE switchover preserves supported packet-forwarding continuity with recorded chassis state. The safer implementation step is: Verify GRES prerequisites, backup RE readiness and state synchronization before a controlled failover test.

Incorrect Answers

A:

This shortcut would also be unsafe, but for a different LACP aggregate member mismatch case (Two Ethernet ports are configured for an aggregated provider uplink but one member never joins the bundle after a partner-system change.). It does not repeat the defect in this question: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

B:

The proposal recreates the separate Graceful restart forwarding continuity error. The current case instead concerns: A dual-RE router fails over to its backup Routing Engine and loses forwarding continuity because chassis state was not synchronized as designed. Its specific failed assumption is: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

D:

This shortcut would also be unsafe, but for a different LAG load sharing case (A provider LAG has four healthy physical members, but a test with one long-lived flow uses only one physical link.). It does not repeat the defect in this question: Routing Engine switchover support and preserved chassis/forwarding state are incomplete for the intended redundancy setup.

Question 476

At fictional Northline Metro (metro transport), this Junos network defect is reported: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. What should the specialist change first?

  1. Inspect LACP actor and partner state plus member parameters, then align the approved aggregate configuration.
  2. Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.
  3. Inspect both RE health and synchronized redundancy state and resolve unsupported or degraded conditions before maintenance.
  4. Align the VRRP virtual-router identifiers and addresses under the approved configuration and inspect master backup state.

Explanation

Correct Answer

B:

Correct because the observable problem is: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. Use the controlled remedy: Confirm NSR protocol support and synchronization with GRES and test a controlled switchover. Confirm the resulting state with: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.

Incorrect Answers

A:

The proposal is a correction for LACP aggregate member mismatch, not this situation: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. Here the cause is: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

C:

That action would address the separate Dual Routing Engine status check case, where A maintenance team schedules a master RE switchover without verifying the standby RE's health, software compatibility or synchronization state. The present NSR protocol continuity issue instead requires: Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.

D:

The proposal is a correction for VRRP virtual gateway master, not this situation: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. Here the cause is: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

Question 477

A Junos routing specialist investigates at fictional Northline Metro: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. What control gap requires attention?

  1. Flow-based link aggregation hashing can pin one conversation to a member even when other members are available.
  2. The routers do not participate in the same agreed VRRP group and therefore cannot coordinate master election.
  3. GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.
  4. Graceful restart relies on coordinated protocol helper behavior and retained forwarding state to support an appropriate recovery interval.

Explanation

Correct Answer

C:

The most direct cause for NSR protocol continuity is GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated. The appropriate response is Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.

Incorrect Answers

A:

This is a different failure mechanism: Flow-based link aggregation hashing can pin one conversation to a member even when other members are available. The current symptom is: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. The more direct defect is: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

B:

That diagnosis belongs to VRRP virtual gateway master, for example: Two customer-edge routers both claim master status for the same intended VRRP virtual gateway after one router was provisioned with the wrong group ID. It does not explain this case, which is caused by: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

D:

This is a different failure mechanism: Graceful restart relies on coordinated protocol helper behavior and retained forwarding state to support an appropriate recovery interval. The current symptom is: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. The more direct defect is: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

Question 478

Following remediation at fictional Northline Metro, how should the team verify that this specific issue is resolved? During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state.

  1. Supported routing adjacencies remain continuous through the test while the backup RE assumes control.
  2. A controlled routing-process restart retains approved traffic flow and neighbors recover within the accepted GR interval.
  3. The LAG remains healthy and multiple independent flow hashes use the intended member distribution.
  4. A controlled failure causes BFD to declare Down and triggers the expected routing reconvergence in the approved interval.

Explanation

Correct Answer

A:

The acceptance criterion must prove the original behavior changed: Supported routing adjacencies remain continuous through the test while the backup RE assumes control. This follows from the remedial action: Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.

Incorrect Answers

B:

This observation is appropriate for Graceful restart forwarding continuity, not the NSR protocol continuity defect at Northline Metro. Verify instead: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.

C:

The alternative proof tests a different cause: Flow-based link aggregation hashing can pin one conversation to a member even when other members are available. The relevant acceptance condition remains: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.

D:

That result would validate the separate BFD fast failure detection scenario (A transit link suffers one-way forwarding failure while an IGP neighbor waits for a much longer protocol hold timer to expire.). It does not prove the needed NSR protocol continuity outcome: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.

Question 479

After corrective implementation at fictional Northline Metro, reviewers revisit: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: One router is Master and the other Backup for the same virtual gateway, with failover preserving the default gateway.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: A controlled failure causes BFD to declare Down and triggers the expected routing reconvergence in the approved interval.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: A controlled RE switchover preserves the approved bridge MAC state and bridging traffic behavior.

Explanation

Correct Answer

C:

The repeated release test must confirm: Supported routing adjacencies remain continuous through the test while the backup RE assumes control. That check detects recurrence of the original defect: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

Incorrect Answers

A:

That control would prevent the different failure The routers do not participate in the same agreed VRRP group and therefore cannot coordinate master election. It would not detect recurrence of: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

B:

The proposed check belongs to the separate BFD fast failure detection issue at Alder Telecom. For this case, retest: Supported routing adjacencies remain continuous through the test while the backup RE assumes control.

D:

That control would prevent the different failure The intended nonstop bridging capability or supported bridge-state synchronization is absent or incomplete. It would not detect recurrence of: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

Question 480

For fictional Northline Metro, identify the shortcut that fails to address: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state.

  1. Force power removal of the master RE repeatedly before verifying that the backup is ready.
  2. Schedule repeated unplanned RE resets as a substitute for validating backup readiness.
  3. Assign distinct VRRP groups and expect them to elect one shared master automatically.
  4. Assume GRES alone guarantees every BGP and IS-IS neighbor remains unreset in any configuration.

Explanation

Correct Answer

D:

The proposed shortcut undermines the expected result: Supported routing adjacencies remain continuous through the test while the backup RE assumes control. The safer implementation step is: Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.

Incorrect Answers

A:

This alternative is problematic for GRES Routing Engine failover, rather than the reported NSR protocol continuity. Corrective action here is: Confirm NSR protocol support and synchronization with GRES and test a controlled switchover.

B:

This shortcut would also be unsafe, but for a different Dual Routing Engine status check case (A maintenance team schedules a master RE switchover without verifying the standby RE's health, software compatibility or synchronization state.). It does not repeat the defect in this question: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

C:

The proposal recreates the separate VRRP virtual gateway master error. The current case instead concerns: During a planned Routing Engine switchover, control protocols reset even though GRES alone preserved hardware forwarding state. Its specific failed assumption is: GRES and nonstop active routing address different continuity layers; protocol-state replication for NSR is not validated.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-364 Premium File?

The JN0-364 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-364 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-364 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-364 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.