Pass Juniper JN0-364 Exam in First Attempt Easily

Latest Juniper JN0-364 Practice Test Questions, Exam Dumps
Accurate & Verified Answers As Experienced in the Actual Test!

You save
$6.00
Save
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
Verified by experts
JN0-364 Questions & Answers
Exam Code: JN0-364
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Certification Provider: Juniper
JN0-364 Premium File
69 Questions & Answers
Last Update: Nov 4, 2026
Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.
$65.99
$59.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 31

Question 300

For fictional Ridgeway Wireless, identify the shortcut that fails to address: A switch reports correct trunk configuration but a single source MAC is seen under an unexpected VLAN after a migration.

  1. Delete the whole bridge domain database without checking the learned MAC's actual VLAN context.
  2. Increase MAC aging indefinitely so the topology loop stops appearing in alerts.
  3. Translate all distinct customer C-tags into one flat untagged provider broadcast domain.
  4. Reduce all customer MTUs arbitrarily while ignoring which provider hop is rejecting larger frames.

Explanation

Correct Answer

A:

The proposed shortcut undermines the expected result: Operational VLAN and MAC-table views show the source learned in the intended service VLAN after test traffic. The safer implementation step is: Compare live bridge MAC entries with interface VLAN tagging and adjust only the incorrect migrated port mapping.

Incorrect Answers

B:

This shortcut would also be unsafe, but for a different MAC flapping loop case (The same source MAC alternates rapidly between two physical ports after a parallel Ethernet link was added without coordinated loop controls.). It does not repeat the defect in this question: Configured VLAN membership and observed data-plane tagging disagree on the migrated physical port.

C:

The proposal recreates the separate Provider Q in Q tag preservation error. The current case instead concerns: A switch reports correct trunk configuration but a single source MAC is seen under an unexpected VLAN after a migration. Its specific failed assumption is: Configured VLAN membership and observed data-plane tagging disagree on the migrated physical port.

D:

This alternative is problematic for Provider service MTU, rather than the reported VLAN forwarding table validation. Corrective action here is: Compare live bridge MAC entries with interface VLAN tagging and adjust only the incorrect migrated port mapping.

Question 301

At fictional Cedar Mobile (mobile backhaul), this Junos network defect is reported: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. What should the specialist change first?

  1. Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.
  2. Enable and test loop protection on appropriate non-designated links and repair the faulty transport.
  3. Set and validate root-bridge priority according to the designed core-first RSTP topology.
  4. Validate the supported VSTP per-VLAN root and port roles for the two service VLANs.

Explanation

Correct Answer

C:

Correct because the observable problem is: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. Use the controlled remedy: Set and validate root-bridge priority according to the designed core-first RSTP topology. Confirm the resulting state with: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

Incorrect Answers

A:

That action would address the separate RSTP edge port on switch uplink case, where A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. The present RSTP root selection issue instead requires: Set and validate root-bridge priority according to the designed core-first RSTP topology.

B:

The proposal is a correction for Loop protection unidirectional failure, not this situation: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. Here the cause is: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

D:

That action would address the separate VSTP per VLAN topology case, where Two VLANs require different forwarding root paths, but an operator assumes a single common spanning-tree decision is sufficient for both. The present RSTP root selection issue instead requires: Set and validate root-bridge priority according to the designed core-first RSTP topology.

Question 302

A Junos routing specialist investigates at fictional Cedar Mobile: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. What control gap requires attention?

  1. Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.
  2. The topology design needs per-VLAN spanning-tree placement rather than an unexamined single shared forwarding tree.
  3. The MSTP region name, revision or VLAN-to-instance mapping differs between intended region members.
  4. Lost BPDUs on a non-designated port create a loop hazard without the intended loop-protection behavior.

Explanation

Correct Answer

A:

The most direct cause for RSTP root selection is Root-bridge election settings no longer reflect the approved topology control-plane hierarchy. The appropriate response is Set and validate root-bridge priority according to the designed core-first RSTP topology.

Incorrect Answers

B:

This is a different failure mechanism: The topology design needs per-VLAN spanning-tree placement rather than an unexamined single shared forwarding tree. The current symptom is: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. The more direct defect is: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

C:

That diagnosis belongs to MSTP region digest mismatch, for example: Two aggregation switches are meant to share an MSTP region but show different region boundary behavior after one VLAN-to-instance edit. It does not explain this case, which is caused by: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

D:

The alternate cause would explain Loop protection unidirectional failure. For RSTP root selection at Cedar Mobile, the evidence instead supports: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

Question 303

Following remediation at fictional Cedar Mobile, how should the team verify that this specific issue is resolved? An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core.

  1. Each service VLAN follows its specified loop-free root path and retains redundancy after a link event.
  2. A simulated lost-BPDU condition keeps the protected link from forming a forwarding loop.
  3. show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.
  4. The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

Explanation

Correct Answer

C:

This outcome directly measures RSTP root selection: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops. It tests the diagnosed issue: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

Incorrect Answers

A:

The alternative proof tests a different cause: The topology design needs per-VLAN spanning-tree placement rather than an unexamined single shared forwarding tree. The relevant acceptance condition remains: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

B:

That result would validate the separate Loop protection unidirectional failure scenario (A switch stops receiving BPDUs on an alternate path after one-way optical degradation and the blocked link risks transitioning to forwarding.). It does not prove the needed RSTP root selection outcome: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

D:

The alternative proof tests a different cause: A switch-facing link was misclassified as an edge port rather than a topology participant. The relevant acceptance condition remains: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

Question 304

After corrective implementation at fictional Cedar Mobile, reviewers revisit: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: The switches agree on region configuration and intended MST instances behave consistently.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: Each service VLAN follows its specified loop-free root path and retains redundancy after a link event.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

Explanation

Correct Answer

B:

A recurring safeguard for RSTP root selection should test this actual outcome: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops. It exercises the configured correction: Set and validate root-bridge priority according to the designed core-first RSTP topology.

Incorrect Answers

A:

This recurring check measures MSTP region digest mismatch, whereas the fixed RSTP root selection behavior needs ongoing evidence that: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

C:

The proposed check belongs to the separate VSTP per VLAN topology issue at Lighthouse Broadband. For this case, retest: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

D:

This recurring check measures RSTP edge port on switch uplink, whereas the fixed RSTP root selection behavior needs ongoing evidence that: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

Question 305

For fictional Cedar Mobile, identify the shortcut that fails to address: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core.

  1. Enable edge mode on all trunk ports so they reach forwarding faster after every change.
  2. Disable spanning tree to stop the access switch winning the election.
  3. Configure one device with an arbitrary VLAN mapping while retaining the old region name.
  4. Raise the customer switch's bridge priority without enforcing root protection on the handoff.

Explanation

Correct Answer

B:

The proposed shortcut undermines the expected result: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops. The safer implementation step is: Set and validate root-bridge priority according to the designed core-first RSTP topology.

Incorrect Answers

A:

The proposal recreates the separate RSTP edge port on switch uplink error. The current case instead concerns: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. Its specific failed assumption is: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

C:

This shortcut would also be unsafe, but for a different MSTP region digest mismatch case (Two aggregation switches are meant to share an MSTP region but show different region boundary behavior after one VLAN-to-instance edit.). It does not repeat the defect in this question: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

D:

The proposal recreates the separate Root protection superior BPDU error. The current case instead concerns: An access switch becomes the root bridge on a shared Ethernet ring after a replacement with a lower bridge priority than the core. Its specific failed assumption is: Root-bridge election settings no longer reflect the approved topology control-plane hierarchy.

Question 306

At fictional Pinecrest Cable (cable operator), this Junos network defect is reported: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. What should the specialist change first?

  1. Validate the supported VSTP per-VLAN root and port roles for the two service VLANs.
  2. Enable and test loop protection on appropriate non-designated links and repair the faulty transport.
  3. Align MSTP region identifiers and VLAN mappings across member switches, then validate topology.
  4. Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Explanation

Correct Answer

D:

Correct because the observable problem is: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. Use the controlled remedy: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink. Confirm the resulting state with: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

Incorrect Answers

A:

Although relevant to VSTP per VLAN topology, this configuration does not remedy the reported RSTP edge port on switch uplink failure. Use: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

B:

That action would address the separate Loop protection unidirectional failure case, where A switch stops receiving BPDUs on an alternate path after one-way optical degradation and the blocked link risks transitioning to forwarding. The present RSTP edge port on switch uplink issue instead requires: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

C:

The proposal is a correction for MSTP region digest mismatch, not this situation: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. Here the cause is: A switch-facing link was misclassified as an edge port rather than a topology participant.

Question 307

A Junos routing specialist investigates at fictional Pinecrest Cable: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. What control gap requires attention?

  1. A switch-facing link was misclassified as an edge port rather than a topology participant.
  2. The interface lacks effective root protection for a direction where root-election claims must not be accepted.
  3. Lost BPDUs on a non-designated port create a loop hazard without the intended loop-protection behavior.
  4. The MSTP region name, revision or VLAN-to-instance mapping differs between intended region members.

Explanation

Correct Answer

A:

The scenario is explained by: A switch-facing link was misclassified as an edge port rather than a topology participant. This is distinct from unrelated application failures. The recommended correction is: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Incorrect Answers

B:

The alternate cause would explain Root protection superior BPDU. For RSTP edge port on switch uplink at Pinecrest Cable, the evidence instead supports: A switch-facing link was misclassified as an edge port rather than a topology participant.

C:

This is a different failure mechanism: Lost BPDUs on a non-designated port create a loop hazard without the intended loop-protection behavior. The current symptom is: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. The more direct defect is: A switch-facing link was misclassified as an edge port rather than a topology participant.

D:

That diagnosis belongs to MSTP region digest mismatch, for example: Two aggregation switches are meant to share an MSTP region but show different region boundary behavior after one VLAN-to-instance edit. It does not explain this case, which is caused by: A switch-facing link was misclassified as an edge port rather than a topology participant.

Question 308

Following remediation at fictional Pinecrest Cable, how should the team verify that this specific issue is resolved? A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk.

  1. Test superior BPDUs are blocked from changing the approved provider root and recovery follows policy.
  2. A simulated lost-BPDU condition keeps the protected link from forming a forwarding loop.
  3. The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.
  4. show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

Explanation

Correct Answer

C:

The acceptance criterion must prove the original behavior changed: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior. This follows from the remedial action: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Incorrect Answers

A:

This observation is appropriate for Root protection superior BPDU, not the RSTP edge port on switch uplink defect at Pinecrest Cable. Verify instead: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

B:

The alternative proof tests a different cause: Lost BPDUs on a non-designated port create a loop hazard without the intended loop-protection behavior. The relevant acceptance condition remains: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

D:

This observation is appropriate for RSTP root selection, not the RSTP edge port on switch uplink defect at Pinecrest Cable. Verify instead: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

Question 309

After corrective implementation at fictional Pinecrest Cable, reviewers revisit: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. Which safeguard best protects the repaired state?

  1. Retest this approved Junos service-provider routing and switching control after relevant changes: Test superior BPDUs are blocked from changing the approved provider root and recovery follows policy.
  2. Retest this approved Junos service-provider routing and switching control after relevant changes: An unauthorized switch produces a protection event while an approved end-host connection remains usable.
  3. Retest this approved Junos service-provider routing and switching control after relevant changes: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.
  4. Retest this approved Junos service-provider routing and switching control after relevant changes: show spanning-tree bridge shows the approved core as root and expected alternate links prevent loops.

Explanation

Correct Answer

C:

A recurring safeguard for RSTP edge port on switch uplink should test this actual outcome: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior. It exercises the configured correction: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Incorrect Answers

A:

The proposed check belongs to the separate Root protection superior BPDU issue at Sterling Cloud. For this case, retest: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

B:

This recurring check measures BPDU protection triggered, whereas the fixed RSTP edge port on switch uplink behavior needs ongoing evidence that: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

D:

The proposed check belongs to the separate RSTP root selection issue at Cedar Mobile. For this case, retest: The uplink participates in RSTP and handles topology BPDUs while true host ports retain edge behavior.

Question 310

For fictional Pinecrest Cable, identify the shortcut that fails to address: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk.

  1. Disable BPDU protection on all edge ports to prevent future protective shutdowns.
  2. Disable VLAN-specific spanning tree and rely on a shared unmanaged Ethernet ring.
  3. Raise the customer switch's bridge priority without enforcing root protection on the handoff.
  4. Enable edge mode on all trunk ports so they reach forwarding faster after every change.

Explanation

Correct Answer

D:

That shortcut preserves the original RSTP edge port on switch uplink weakness: A switch-facing link was misclassified as an edge port rather than a topology participant. The controlled alternative is: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Incorrect Answers

A:

This shortcut would also be unsafe, but for a different BPDU protection triggered case (An access-edge interface shuts down when a user adds an unauthorized desktop switch that sends spanning-tree BPDUs.). It does not repeat the defect in this question: A switch-facing link was misclassified as an edge port rather than a topology participant.

B:

The proposal recreates the separate VSTP per VLAN topology error. The current case instead concerns: A port connected to another switch is mistakenly configured as an edge interface and fast transitions generate an unexpected loop risk. Its specific failed assumption is: A switch-facing link was misclassified as an edge port rather than a topology participant.

C:

This alternative is problematic for Root protection superior BPDU, rather than the reported RSTP edge port on switch uplink. Corrective action here is: Remove inappropriate edge behavior and validate RSTP participation on the switch-to-switch uplink.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

accept downloads in the last 7 days
What exactly is JN0-364 Premium File?

The JN0-364 Premium File has been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and valid answers.

JN0-364 Premium File is presented in VCE format. VCE (Virtual CertExam) is a file format that realistically simulates JN0-364 exam environment, allowing for the most convenient exam preparation you can get - in the convenience of your own home or on the go. If you have ever seen IT exam simulations, chances are, they were in the VCE format.

What is VCE?

VCE is a file format associated with Visual CertExam Software. This format and software are widely used for creating tests for IT certifications. To create and open VCE files, you will need to purchase, download and install VCE Exam Simulator on your computer.

Can I try it for free?

Yes, you can. Look through free VCE files section and download any file you choose absolutely free.

Where do I get VCE Exam Simulator?

VCE Exam Simulator can be purchased from its developer, https://www.avanset.com. Please note that Exam-Labs does not sell or support this software. Should you have any questions or concerns about using this product, please contact Avanset support team directly.

How are Premium VCE files different from Free VCE files?

Premium VCE files have been developed by industry professionals, who have been working with IT certifications for years and have close ties with IT certification vendors and holders - with most recent exam questions and some insider information.

Free VCE files All files are sent by Exam-labs community members. We encourage everyone who has recently taken an exam and/or has come across some braindumps that have turned out to be true to share this information with the community by creating and sending VCE files. We don't say that these free VCEs sent by our members aren't reliable (experience shows that they are). But you should use your critical thinking as to what you download and memorize.

How long will I receive updates for JN0-364 Premium VCE File that I purchased?

Free updates are available during 30 days after you purchased Premium VCE file. After 30 days the file will become unavailable.

How can I get the products after purchase?

All products are available for download immediately from your Member's Area. Once you have made the payment, you will be transferred to Member's Area where you can login and download the products you have purchased to your PC or another device.

Will I be able to renew my products when they expire?

Yes, when the 30 days of your product validity are over, you have the option of renewing your expired products with a 30% discount. This can be done in your Member's Area.

Please note that you will not be able to use the product after it has expired if you don't renew it.

How often are the questions updated?

We always try to provide the latest pool of questions, Updates in the questions depend on the changes in actual pool of questions by different vendors. As soon as we know about the change in the exam question pool we try our best to update the products as fast as possible.

What is a Study Guide?

Study Guides available on Exam-Labs are built by industry professionals who have been working with IT certifications for years. Study Guides offer full coverage on exam objectives in a systematic approach. Study Guides are very useful for fresh applicants and provides background knowledge about preparation of exams.

How can I open a Study Guide?

Any study guide can be opened by an official Acrobat by Adobe or any other reader application you use.

What is a Training Course?

Training Courses we offer on Exam-Labs in video format are created and managed by IT professionals. The foundation of each course are its lectures, which can include videos, slides and text. In addition, authors can add resources and various types of practice activities, as a way to enhance the learning experience of students.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Certification/Exam.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

Enter Your Email Address to Proceed

Please fill out your email address below in order to purchase Demo.

A confirmation link will be sent to this email address to verify your login.

Make sure to enter correct email address.

How It Works

Download Exam
Step 1. Choose Exam
on Exam-Labs
Download IT Exams Questions & Answers
Download Avanset Simulator
Step 2. Open Exam with
Avanset Exam Simulator
Press here to download VCE Exam Simulator that simulates latest exam environment
Study
Step 3. Study
& Pass
IT Exams Anywhere, Anytime!

SPECIAL OFFER: GET 10% OFF. This is ONE TIME OFFER

You save
10%
Save
Exam-Labs Special Discount

Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login

* We value your privacy. We will not rent or sell your email address.

SPECIAL OFFER: GET 10% OFF

You save
10%
Save
Exam-Labs Special Discount

USE DISCOUNT CODE:

A confirmation link was sent to your email.

Please check your mailbox for a message from [email protected] and follow the directions.